Hello i have a camo request to make. This camo is off the Indian Army's main camouflage. I have seen a bunch of cool pictures of it on google images and just in general it looks like an awesome version of french CE woodland camouflage
https://files.facepunch.com/forum/upload/356209/597fa2bd-02f9-41f8-88a1-09dce3ff986e/c0c74372abfbefe0.jpg
https://files.facepunch.com/forum/upload/356209/ece452ff-25cc-46db-8530-3f32a911bd60/images.jpg
. Here are all the pictures i can find that show the pattern the most.
https://files.facepunch.com/forum/upload/356209/23573b00-dbb6-4107-933c-1a08796a3d6b/200px-India19.jpg
That's alot of camo for one man to handle.
Looks like it isn't EXACTLY the CE pattern. And India has like five different versions of the bushstroke.
Well please don't feel pressured to do all just one brushstroke recreation would be amazing.
Apparently the primary mill for the pattern doesn't want textile manufacturers from copying their PC Disruptive design.
However, they've released a low-res pic of the pattern in an article about it...
http://knnindia.co.in/news/newsdetails/sectors/chennai-ordnance-clothing-factory-cautions-textile-mfgs-traders-against-imitating-their-designs
They don't want anything that looks close to it, yet it's basically a CE copy. Diagonal repeat, so it's easier to print than CE, though.
wow nice camo find i think just a change of colors on CE would be more than enough.
As far as I can tell, CE doesn't have a horizontal repeat (and if it does, it'll make the pattern extremely wide). This has a much more reasonable horizontal repeat since it uses diagonal repeats.
Requesting permission from -Rusty- & KameradJosef to use your camo patterns for some ARMA 3 textures! Already got permission from Tounushi, big thanks to him. To contribute, here's a rough approximation of a digital camo I've seen on some Ukrainian export vehicles:
https://files.facepunch.com/forum/upload/370252/f889d903-045c-4539-a53e-89705e05da69/DIGI_Export.png
yeah go ahead
well it would be awesome to see an indian type camo still
Go for it, would like to see what they get used for too.
https://files.facepunch.com/forum/upload/370252/48115fe4-5a41-4f49-aa2d-f517f6e4d66d/20181218061414_1.jpg
Here's some of my latest work, Rusty's Swedish M90 & KameradJosef's Portugese Lizard acting as a substitute for Brazilian Lizard. I've also used Rusty's other nordic camos, splinter camo for Libyan uniforms, KLMK, and Thunderbolt for Egyptian SpecOps. I could dig up more screenshots if you guys want, but I don't want to flood the thread with them unnecessarily.
Hey, Tounushi, I sent you a message via DeviantArt and then noticed you haven't actually posted anything there since 2017. I'll just copy pasta the message here.
[quote]
I found, quite by accident, the camo threads on the Facepunch forums.
However, I was wondering if you couldn't link me to the versions with
layers. I have a project in mind and I'll link you to the post in the
Mechwarrior Online forums when it's done. Naturally, I will give you
credit as the source of the camos.
The specific camos are MoHW Gorka-E, WH40K Splinter and Dot, SS Eichenlaub Summer, and Cz '53 Sumpfmuster.
[/quote]
I had no idea we'd moved to a V3 thread. Would've been nice to have a final message indicating as such instead of just checking in to see it was locked... /s
Good to see everyone back in action, and I was hoping to see if anyone had some tile-able AMCU pattern that would work well on an ArmA 3 uniform.
Hoping for it to match this scale (actual texture plate size is 2048x2048):
https://files.facepunch.com/forum/upload/133091/6dd17085-5660-4975-93bb-9856f6fcc5ee/example.PNG
Also still looking for those winter patterns seen in MW2 with TF141. I am aware that one is a recoloured DCU, not so sure about the other two or three:
https://files.facepunch.com/forum/upload/133091/7bd4469e-8ed7-4e90-806c-5079124f0be0/tf_141_arctic_upper_body_b_col.png
https://files.facepunch.com/forum/upload/133091/8cf92c9b-6b54-49b4-8edd-87ebe9de5d05/tf_141_arctic_upper_body_a_col.png
https://files.facepunch.com/forum/upload/133091/0146eb3f-883e-4540-aad4-344363dd5058/tf_141_arctic_lower_body_a_col.png
Cheers guys!
Has anyone done the new LBX patterns?
https://files.facepunch.com/forum/upload/379664/8e9828bc-2326-451e-be82-fbd8d8d24604/LBX_CAMO_PACK.jpg
I've tried myself to recreate them with no luck.
dammit, can't edit the quote to focus on the part being replied to....
Those patterns look like they've been made with custom brushes, or like the BF russian Shark camo, there IS an intact tile, but it's been copied over somewhat erratically and custom edited to create a larger pattern.
Some shapes also are obscured by the scuffs on the uniforms. Still, gonna see what I can do.
Awesome! The first pattern kinda looks like a stretched Irish DPM/Brushstroke-based pattern if you squint. Not sure about the second, and the third looks like a digital-style pattern with rounded edges on the shapes, like they've taken elements from Flecktarn and pasted them onto it.
Got a few patterns from Planetside 2 (as far as I know Tounushi hasn't already done these ones). They're straight from the game but have had a bit of clean up because they were frankly in a terrible state. For some reason they didn't tile properly and were riddled with artefacts.
Arid Forest:
https://files.facepunch.com/forum/upload/208392/c27bcc5e-7922-4292-be3a-b0dae4dff601/Planetside_2_AridForest_TC_02_Fixed_By_Trainbike.png
Temperate Chaparral:
https://files.facepunch.com/forum/upload/208392/6f757005-48bc-451f-a73d-8f0faaa461e9/Planetside_2_TemperateChaparral_TC_Fixed_By_Trainbike.png
Temperate Chaparral 2 (as far as I remember this was never available in-game in these colours, it was however recoloured and used as a desert pattern):
https://files.facepunch.com/forum/upload/208392/5555e0a8-58a3-4eea-8169-294e4192560c/Planetside_2_TemperateChaparral_TC_02_Fixed_By_Trainbike.png
i am looking for a camo that is white/light gray and orange is there a camo like that?
Anyone got Battlefield 5 skins? If anyone's bothered to buy it, anyway...
I've run into a few pics of uniform customization, with some interesting camo choices.
https://i.redd.it/sminmfgriz611.png
There's WW1 polygonal (never used in uniforms AFAIK), two splittermusters (seen a third alternate color scheme) and a very tight splittermuster.
I have a handful that somebody posted in the BF thread that were ripped from the beta (unfortunately I forget who it was). I only have the polygonal one and a different version of the splitter though.
https://files.facepunch.com/forum/upload/208392/8aef112e-b99d-4b00-ab2f-458f04916177/Ger_1.jpg
https://files.facepunch.com/forum/upload/208392/407cf6d5-0b0f-4a16-ba45-53ce3ed0556c/Ger_2.jpg
I'll just link the others since you didn't ask for these specifically
https://files.facepunch.com/forum/upload/208392/94ba3c43-ed49-457e-879a-78d3621ad42b/Ger_3.jpg
https://files.facepunch.com/forum/upload/208392/6af80960-378a-4b6e-8ab5-659bf2641522/Ger_4.jpg
https://files.facepunch.com/forum/upload/208392/4c1ac7f1-c0ba-4202-8ffc-f559461062d7/Brit_1.jpg
https://files.facepunch.com/forum/upload/208392/f6f5eb0b-e449-4ff5-a845-57e78d62a739/Brit_2.jpg
https://files.facepunch.com/forum/upload/208392/1c9af266-32c2-42aa-b12b-2f50c95137a7/Brit_3.jpg
https://images-wixmp-ed30a86b8c4ca887773594c2.wixmp.com/intermediary/f/a870da61-252c-46ec-9632-694c0ac65ee6/dcwlk8c-5380f058-f18f-4ca6-8024-69782d2d970a.png
A lizard pattern I made.
It's not Rusty or Tounishi level stuff but it's still pretty good, enjoy
Very nice.
Is your program able to make transparencies? The Lizard uses overprints. This'd be more like a Tiger Stripe with the solid colors.
i didn't realize that was how it worked, i might try it again sometime
I think your pattern looks good actually, nice job man!
Anyone here capable of recreating this camo? There aren't many high quality pictures because its still somewhat of a prototype for the new Portuguese Army Camo.
https://i.imgur.com/jKqGUvj.png
https://i.imgur.com/IZXZISl.png
https://i.imgur.com/qVZeFPb.png
This was posted on the official army's facebook page. might help
https://i.imgur.com/NzKVYYd.png
Not enough flat and clean parts for a good reconstruction. Might be more once the pattern is deployed.
I think a lookalike can be made from Flecktarn and JGSDF patterns.
Yeah. I need to try and get some high quality flat pictures of the camo. It kinda reminded me of Multifleck.
Some time ago i asked someone to help me out he managed to create a flat(ish) image but stopped working on it.
https://i.imgur.com/JXfAraq.jpg
This kind of stuff is usually patented right? They have the flat camo images they use for facebook, do you think they could give them out?
https://i.imgur.com/UjRaEEA.jpg
Not too sure militaries make their camo designs freely available, especially European ones which generally are more OCD about informational security than the US DoD. Taking my own country as an example, the MOD went so far as to actually file a patent for the MTP design even though it's just a Multicam variant with slightly different colours and some incorporation of DPM-style elements.
Sorry, you need to Log In to post a reply to this thread.