ApwnInTheDark's Star Trek Pack - DO YOU WISH TO ADD ANYTHING?

[ApwnInTheDark]

[QUOTE]Can we get a model of that with a bridge and shuttle bay? [/QUOTE]

No because it is the shuttle, and I dont think you want the shuttlebay

[Used Car Salesm]

[QUOTE=jabba69R;20140806]dude really your wasting me and apwns time with your brain dead comments[/QUOTE]

You haven't actually done anything. Stop acting like you're such hot shit.

[itak365]

Hey, is there a model of the Phoenix lying around anywhere?
I.e., Zefram Cochrane's ship that was the first to reach warp speed.

(Also, it's a modified Nuclear Missile: In fact, I think it's similar to the one used in Episode 2)

Also, is there plans to make a map that is just a bridge? Probably one that could be used for multiple ships. That in itself would be pretty useful.

[jabba69R]

[QUOTE=itak365;20160246]Hey, is there a model of the Phoenix lying around anywhere?
I.e., Zefram Cochrane's ship that was the first to reach warp speed.

(Also, it's a modified Nuclear Missile: In fact, I think it's similar to the one used in Episode 2)

Also, is there plans to make a map that is just a bridge? Probably one that could be used for multiple ships. That in itself would be pretty useful.[/QUOTE]

[QUOTE=Used Car Salesman;20159408]You haven't actually done anything. Stop acting like you're such hot shit.[/QUOTE]

i don't think there is any models of the phoenix i don't even think that ship was in any star trek game there maybe a model out there somewhere i'll take alook around for a model of it if i do find i'll write back here again also i'm learning to model but if i do find it i'll give apwn a copy of the file and i'll try my new skills at turning it in to a fully working ship model :)

also used car salesman you are a total smeghead! now GTFO :3

[itak365]

We could also make the thing, if possible. It looks like a modified version of the EP2 rocket, and then we'd have another version with the extended Nacelles.

[ApwnInTheDark]

[QUOTE]Also, is there plans to make a map that is just a bridge? Probably one that could be used for multiple ships. That in itself would be pretty useful.[/QUOTE]

I think your referring to a modular bridge, but it would be a model instead of a map. I was thinking of using my enterprise-D bridge for this since its relatively small and has the largest viewscreen.

[editline]01:52PM[/editline]

[img]http://99.33.54.88/RequestingAssistance/BridgeWithLightmaps.jpg[/img]

[ApwnInTheDark]

All 3 drydocks now added to pack (the NX-01 version has been updated)

[img]http://99.33.54.88/3Docks.jpg[/img]

[jabba69R]

cool dude i can't wait to see them :D i'll talk to you the night if you are on

[=LB=evilweevil]

hmm can i say the defiant interior in the screen shot there looks much like the tactical bridge of star trek online ;-)

[jabba69R]

i know where he got the ship from but i never asked where he got the bridge for the defiant from where did you get it apwn LOL ?

[ApwnInTheDark]

[QUOTE]where did you get it apwn LOL ? [/QUOTE]

Deep Space 9: The Fallen for PC, its part of a map

I only played Star Trek: Online for a few days before I canceled my pre-order (because my freinds bailed out and i *kind of* understand why) so I've never seen the tactical bridge, but it makes sense that they modeled it after the Defiant since its purely a warship.

[ApwnInTheDark]

I've been finishing up my Pillar of Autumn for the last couple of days so I will keep working on this pack as soon as its finished.

It will not be a part of my Star Trek pack, (dur) and will be a standalone download immediately available for download as soon as its done.

As much as I hate to admit it, its model/texture quality, as well as it's bridge, is vastly superior to any of my Star Trek ships. It should provide plenty of entertainment while I continue working on my starships.

Here is a thread link for more info:
[url]http://www.facepunch.com/showthread.php?t=866984[/url]

[img]http://99.33.54.88/PillarOfAutumn/POAExterior1.jpg[/img]

[jabba69R]

looks great can't wait to see this in action

[Korro Bravin]

Please, please please please release a beta of these, i MUST have the Defiant, it is my favourite ship from star trek,

[jabba69R]

[QUOTE=Korro Bravin;20353320]Please, please please please release a beta of these, i MUST have the Defiant, it is my favourite ship from star trek,[/QUOTE]

apwn will not share any of his ships untill he as completed the star trek ship pack.

i'm apwn in the darks beta tester so you'll have to wait like the rest untill the pack is ready.
there's still alot of work for him to do so please wait.

here is some of the items he has made for gmod that you can use right now!.

uss voyager ----------- [URL]http://www.garrysmod.org/downloads/?a=view&id=74502[/URL]
uss enterprise_V1 ---- [URL]http://www.garrysmod.org/downloads/?a=view&id=63902[/URL]
enterprise drydock --- [URL]http://www.garrysmod.org/downloads/?a=view&id=73023[/URL]

[ApwnInTheDark]

dont worry Korro. I dont plan to quit, but if I do, Ill make sure to upload the pack in its current form before, and the Defiant is 100% completed.

[Korro Bravin]

Awesome, i could be your beta tester for low end computers, as mine is a complete piece of *CENSORED* =D

[Captn_kirk]

I'm trying to make a couple of variants of the Nebula Class, Hospital Ship, and the one with the Extra nacelles, along with the origional. They're going to have interiors, and you can put them in the pack when their done, its just that they'll lack Collision meshes. (since I'm useless with them)

I have to ask GData if I can use the models first, so it could take a while

I have an Unscaled Dominion Battle Cruiser Model as well, Ive ported it and Done all the textures. It lacks collision meshes, and an Interior, But it could be usefull.

[ApwnInTheDark]

Nice Kirk! With your permission, I'll do the collision models for your bridged ships, assuming everything else is in order.

You still have plenty of time to work on this, but rather than asking each other to inaccurately predict deadlines, and then bitching when they don't happen, I say we continue to regularly post updates and pics, and simply adjust speed to finish around the same time.

About your models lacking interiors:

You say your useless with collisions, but since bridgeless ships generally useless for flight anyways, you might try practicing making collisions on them by making box nacelles, box hull, cylinder saucers etc. Even if your collisions are piss, they will still be good enough to just sit there looking cool, to grab with a phys gun, or to use as target practice.

As I said, it would be good practice for you, otherwise I don't mind spending the few minutes slapping some boxes and cylinders on them myself. Your bridged models (ie: ships people will be running around in and trying to weld wire chips about) will obviously not be given such lazy phys models so no worries there.

[Used Car Salesm]

[QUOTE=ApwnInTheDark;20394189]
As I said, it would be good practice for you, otherwise I don't mind spending the few minutes slapping some boxes and cylinders on them myself. Your bridged models (ie: ships people will be running around in and trying to weld wire chips about) will obviously not be given such lazy phys models so no worries there.[/QUOTE]

Finally, someone who understands our need for places to weld wire components! :neckbeard:

[Captn_kirk]

Ya I will. Im still in the proscess of getting premission for the origional models. But in the mean time Ive started modeling the saucer.

Do you have any good bridge models that could be worked into a nebula bridge ?

[ApwnInTheDark]

if I'm not mistaken, the nebula bridge is identical to the Galaxy bridge, so you're in luck.

[img]http://99.33.54.88/RequestingAssistance/BridgeWithLightmaps.jpg[/img]

Edit: wow, according to fan sites, Nebula has a different bridge?? Odd since the saucer is identical to that of the Galaxy class, and you can even see the circular window atop the bridge, just like a Galaxy.

[img]http://www.ex-astris-scientia.org/articles/oberth/generations-oberth.jpg[/img]

You decide, but if you'd like my Galaxy class bridge let me know.

[Captn_kirk]

Actually they Bridges Used were all different, but they were redone versions of the Galaxy Battle Bridge.

I'd like to use yours as a template, and with your permission Mod it to fit what the Nebula was

Edit: I found one on Bridge Commander, but I'd still like to have your for scaling.

[ApwnInTheDark]

Bridge Commander is actually where I got my Galaxy bridge lol.

If I sent you mine, you might as well just use it because its already to scale, has physics, and it's texures and shaders are already neatly packaged into Garry's Mod. Your Nebula could simply share some or all of my Enterprise-D's bridge textures. It would make your job super easy and be still be sort of canon. (according to bridge commander, that is)

The only differences, I believe, is that there are 2 screens on the bridge which clearly depict a Galaxy class ship. If I'm not mistaken, the rear LCARS screen has an alternate Nebula texture which you or I can grab from bridge commander, but the orange sidescreens (near the ensign stations) show a Galaxy class ship no matter which ship you choose in Bridge Commander.

If this is true, we can always find a replacement from one of the many Trek sites out there.

Crappy textures are one thing, but depicting entirely different ships is ridiculous imho.

Your ship your call tho. I wont modify anything unless you request me to, even if you choose to leave the Galaxy textures in the Nebula.

[editline]04:45AM[/editline]

!!!!!!!!!!!!!RELEASE!!!!!!!!!!!!!

DOWNLOAD: [url]http://www.garrysmod.org/downloads/?a=view&id=92210[/url]

VIDEO: [url]http://www.youtube.com/watch?v=xRvCbmVmaBQ[/url]

This pack includes the following props:

*Halo 1's 'Pillar of Autumn'
*Halo 1 life pod
*2 official Pillar of Autumn blast doors
*2 official life pod doors

Features:
-2-way Pod Bay doubles as 1-way shutlebay
-Markers for easy installation of hydraulic doors
-'Holographic' RT screen near the front of bridge

[img]http://s3.garrysmod.org/img/dl/92210_1.jpg[/img]

[img]http://s3.garrysmod.org/img/dl/92210_2.jpg[/img]

[img]http://s3.garrysmod.org/img/dl/92210_3.jpg[/img]

DOWNLOAD: [url]http://www.garrysmod.org/downloads/?a=view&id=92210[/url]

[Captn_kirk]

Ya, Ill take urs. They're the same saucer so why cant they have the same Bridge ?

Edit: also can you send me a Model of the Galaxys Saucer, for scaling, and a reference for the interiors

[Korro Bravin]

Too bad the POA crashes me...

[Captn_kirk]

I just got an Idea when I downloaded your POA.

We should make the Veiw screens RT Screens, it would give alot better View, and you can change what direction youre looking

[ApwnInTheDark]

That could work. Or weld on RT screen covers, which could be colorized on and off

[Captn_kirk]

ya

[Korro Bravin]

mmm, just got Omega Drivers, no more gmod crashy crashy
\O/
|
/\
Anyway, Excellent work on her! one suggestion, make the massive bulk of the interior hollowed, so that people can add Space build parts to it=D