• The Official Questions Thread V. Labor Union Propaganda
    8,881 replies, posted
It should at least fix the screeching noise of the motor and bevel gear not connecting. I'm not sure if anything else is wrong.
there's a DE single shot shotgun that was bought off Ebay, and with .30's, it shoots so fucking far, it's incredible, I got a headshot with it at like 200 feet (unintentional headshot though, was aiming for the chest, aimed a little too high I guess)
Got my S&W 40F today, but the inner barrel is a bit wobbly, how do I fix this? :v:
[QUOTE=Dark Descent;34608854]Like the gears turn then stop at a certain point and don't release the piston. The tappet plate was like being bent by the gear that pulls it back. SO i understand the bad shimming but how do I adjust the motor height, I have no clue how to do that on my gun.[/QUOTE] check the aoe. [editline]8th February 2012[/editline] [QUOTE=JimmyA;34611282]Got my S&W 40F today, but the inner barrel is a bit wobbly, how do I fix this? :v:[/QUOTE] shim it.
[QUOTE=Jat Goodwin;34611487]check the aoe. [editline]8th February 2012[/editline] [B]shim it.[/B][/QUOTE] how exactly do i shim a CO2 pistol?!
no you shim the barrel to make it tighter. Shimming isnt something exclusive to airsoft gears >:C
i'd assume put spacers around the barrel so it doesnt wobble [editline]8th February 2012[/editline] imlate
[QUOTE=JimmyA;34611795]how exactly do i shim a CO2 pistol?![/QUOTE] Tape around the barrel, even I could figure it out :v:
How is KJW? This model in particular: [url]http://www.evike.com/product_info.php?cPath=21_45_245&products_id=35275[/url] I'm looking for a good silver gun. I really want a single stack 1911, but they're too unreliable from what I've been told.
[url]http://www.evike.com/product_info.php?cPath=21_45_242&products_id=32630[/url] I've narrowed it down to this european pistol as my next gun. Agree for good choice. Disagree for me to keep looking.
[QUOTE=10050;34613329]How is KJW? This model in particular: [url]http://www.evike.com/product_info.php?cPath=21_45_245&products_id=35275[/url] I'm looking for a good silver gun. I really want a single stack 1911, but they're too unreliable from what I've been told.[/QUOTE] KJW M9s are great
So long as its not single stack or a glock, KJW's are made of magic and dreams.
You want tm or wa for single stacks. Or you could be an idiot like me and get a WE as a project gun :v: [editline]8th February 2012[/editline] [QUOTE=TheDon;34613363][url]http://www.evike.com/product_info.php?cPath=21_45_242&products_id=32630[/url] I've narrowed it down to this european pistol as my next gun. Agree for good choice. Disagree for me to keep looking.[/QUOTE] It feels cheap and plasticy. I really don't like it. Try for ksc
[QUOTE=notrabies;34613412]So long as its not single stack [B]or a glock[/B], KJW's are made of magic and dreams.[/QUOTE] Hm? I love my friend's KJW G27. Then again, it's the only GBB I've handled.
[QUOTE=Dark Descent;34613437] [editline]8th February 2012[/editline] It feels cheap and plasticy. I really don't like it. Try for ksc[/QUOTE] The ksc is actually plastic though lol. Although the kwa is aluminum mixed with mystery metal it is a pretty good buy. Mine is on par with every other pistol I've seen, performance wise. Only thing I kinda hate is that most of the weight is in the mag. and of course shitty kwa trades.
[QUOTE=Year_of_Lurking;34613655]The ksc is actually plastic though lol. Although the kwa is aluminum mixed with mystery metal it is a pretty good buy. Mine is on par with every other pistol I've seen, performance wise. Only thing I kinda hate is that most of the weight is in the mag. and of course shitty kwa trades.[/QUOTE] The KSC is actually only plastic on the Japan market version. You can get the Taiwan version [url]http://www.uncompany.com/pageproductdetails.asp?prodid=27114[/url] I'm overall unimpressed by KWAs. They feel cheap and plasticy which is ironic because my WA felt more real in it's stock plastic form.
Fuck I didn't know about the Taiwanese version. You're really making me regret the kwa, but it's too late now anyway.
Hey Jomt, didn't you say before that you could get M90 Camo?
yeah I have a metal KSC G18c. its fucking great
[QUOTE=Stupideye;34614072]yeah I have a metal KSC G18c. its fucking great[/QUOTE] Sell it to me so I can laugh at my friend who broke his.
[QUOTE=venom;34599920]I.. Don't understand this thread's title. What is it a reference to?[/QUOTE] To some people, labor unions draw up thoughts of socialist/communist tendencies. Propaganda being commonly associated with dictatorships, fascist states, and iron curtain nations, combined with thoughts about those commie laborers = labor union propaganda. It's a completely nonsensical title I drew out of my rear end after reading about labor unions on the day I posted the thread. [QUOTE=Mbbird;34600230]I think it's reference to new people coming in and 9 out of 10 of us telling them to buy AKs lol.[/QUOTE] This works too. Not what I had in mind, but it's a perfect fit. If I could give you rep on this forum I would. --- Now, for my own question. Shall I drop this into my M4?: [url]http://www.airsoftgi.com/product_info.php?cPath=30_308&products_id=8011[/url] I currently have a fairly standard M4 w/ two tone receiver, tan stock, tan rail covers, ect. URX rail and EOtech 553(?) replica. The default black 14.5" barrel is not sufficiently cool for my tastes.
not sure why you just dont paint your current barrel :v:
That barrel is also a tad longer.
the accuracy gains from 38mm of extra barrel are hardly noticeable (づ。◕‿‿◕。)づ
I didn't know 1.5" more to my outer barrel would change anything? It's more for looks...I have a 14.5" carbine, a tiny AK, and a behemoth M16A4 rifle. Something a tad larger than an M4 (recce rifle?) but not full sized is what I'm thinking of going for. The question should be better phrased "come up with a reason why I shouldn't spend $65 for a barrel to make my gun look cool."
Because you're spending $65 on a barrel just to make your gun look cool?
because that $65 could be spent on a AWS stealth drop-in fire control FET. :3 and nobody but you will know that you spent $65 on an outer barrel. Its not even noticeable like a nice RIS or "barrel extension" (suppressor). [editline]9th February 2012[/editline] also oem parts like that tend not to fit so well with the gun and require a bit of fitting to make work.
Notrabies, I have decided to go with the 1100 route. Where's the best place to get it and the parts from?
Alrighty, M1100's are pretty good off the bat. What you'll need to do immediately is acquire o-rings for each and every one of your shells to help protect your extractor as long as possible. I don't have the measurements on me, but you want an o-ring that will fit snugly on the base of the shell, right ahead of the lip. I know my o-ring's outer diameter is just barely small enough to fit inside the top of the shell. If you've got the right size, they'll be a pain in the ass to install, but will be nice and snug. While they do wear as they're fired, (you'll notice chunks getting bit out of the rings by the extractor) they're very inexpensive to replace, like $3 for 10. Now if you don't have one already, I recommend you make an account over at arnie's airsoft, so that way you can get in on the custom parts being made there. Just send Schaap a message or follow the M1014 thread in technical discussion->project suggestions. He's finalizing his design on his shell lifters, meaning they'll be available for sale soon, and we're working on redesigning the extractor. You won't need them right off the bat, but you will need them sooner or later. Okay, for the M1100 my personal recommendation is the M1100 Defender II, available at DenTrinity. The compact size is super awesome, and the pistol grip gas cartridge is more convenient, as well as being available to buy if you want more than one. Shell capacity is limited, but you should be reloading a shell every time you fire regardless. If you want the full size, be my guest, but they're a bit more inconvenient. I'll be happy to advise you on either.
On the subject of M1100s, aparrently all that's wrong with the one my brother has is the shell lifter is wrecked, and it fires fine. As opposed to his M870 that has problems with the 'slidey gas seal thing' which he described as a tube fitting inside a larger tube with seals and stuff is completely worn out, but it lifts shells like a champ. Any suggestions on how to fix either of these problems?
Sorry, you need to Log In to post a reply to this thread.