• The Official Questions Thread V. Labor Union Propaganda
    8,881 replies, posted
Just went to my first night game and my dinky flashlight was not enough. Can someone recommend me a good bright flashlight or flashlight website?
ask simpleboo :v: [editline]27th April 2012[/editline] he'll tell you to harness the power of the sun
Trying to find a good and cheap airsoft gun [url]http://www.airsoftgi.com/mobile/product_info.php?cPath=280_351&products_id=6554[/url] [url]http://www.airsoftgi.com/mobile/product_info.php?cPath=280_351&products_id=2573[/url] So are these any good?
Solid guns. I'd go for the Combat Machine if I were you.
Cool thanks Also is gear required? I'll probably only wear an ammo vest, safety glasses and a pair of gloves, but is stuff like camouflage needed?
[QUOTE=Frostypunch;35730841]Cool thanks Also is gear required? I'll probably only wear an ammo vest, safety glasses and a pair of gloves, but is stuff like camouflage needed?[/QUOTE] If you're under 18, most fields will require you to wear a full facemask. And no, camo isn't needed. If you're short on cash and still want some though, pick up some Woodland BDUs from a surplus store. Woodland tends to be cheap.
[QUOTE=Frostypunch;35730449]Trying to find a good and cheap airsoft gun [url]http://www.airsoftgi.com/mobile/product_info.php?cPath=280_351&products_id=6554[/url] [url]http://www.airsoftgi.com/mobile/product_info.php?cPath=280_351&products_id=2573[/url] So are these any good?[/QUOTE] Combat Machines are pretty much as good as it gets when it comes to cheap M4s, I would call that a good choice. The JG is a little bit more meh, JGs are very low-tier except for their G36s which are decent.
Ok cool And what would be a recommended sight? Cqb? Holographic? Red dot?
On our forum classifieds someone is selling an A&K Masada with G&P internals, it comes with an AFG, an Eotech, a three-leaf lipo, and several mags, all for $225. I was trying to get a G&P M4 anyway and this compromises that with a cool gun that's not an M4, go for it guys?
[QUOTE=Jesus Puncher;35725053]Just went to my first night game and my dinky flashlight was not enough. Can someone recommend me a good bright flashlight or flashlight website?[/QUOTE] weapon mounted or in your hand?
[QUOTE=Frostypunch;35732152]Ok cool And what would be a recommended sight? Cqb? Holographic? Red dot?[/QUOTE] Sights aren't a necessity and I would wait until you get more important things before worrying about a sight. The iron sights should be good enough for now.
So I was looking into an M60 airsoft gun recently, its about 360$ and weighs almost 20 lbs. [url]http://www.airsoftgi.com/product_info.php?cPath=284_394&products_id=5251[/url] This would be the one. Anybody have any experience with it or something similar?
I have one. Out of the box it has some serious problems, but if you're willing to fix them it is IMO the best support gun for the money. Basically, the motor sucks and the hop-up is nonexistent. If you replace the hop-up bucking and put a plastic spacer in over the rubber, and swap out the motor with a decent high-speed one, the performance becomes drastically better. I also recommend using the included bypass for the potentiometer it uses to adjust ROF. Otherwise it's great- unbreakable gearbox, extremely reliable and effective box mag, and ergonomics that aren't as bad as you'd think. Definitely better than the A&K M249s, for sure.
[QUOTE=oakman26;35732305]weapon mounted or in your hand?[/QUOTE] Weapon mounted. I want to mount it to my m4 or mp5 so it doesn't have to be a tiny flashlight designed for pistols.
[QUOTE=catbarf;35734626]I have one. Out of the box it has some serious problems, but if you're willing to fix them it is IMO the best support gun for the money. Basically, the motor sucks and the hop-up is nonexistent. If you replace the hop-up bucking and put a plastic spacer in over the rubber, and swap out the motor with a decent high-speed one, the performance becomes drastically better. I also recommend using the included bypass for the potentiometer it uses to adjust ROF. Otherwise it's great- unbreakable gearbox, extremely reliable and effective box mag, and ergonomics that aren't as bad as you'd think. Definitely better than the A&K M249s, for sure.[/QUOTE] I have the longer version and I agree with all of those points get a tightbore barrel for longer range and consistency though [editline]27th April 2012[/editline] it's like $320 without discounts on evike right now btw
-snip-
woodland lol
[QUOTE=W0w00t;35738355]woodland lol[/QUOTE] Cheap and sexy. EDIT: Wait that sounds wrong.
TM or KSC Glock?
TM
KSC is really good. I have the glock internals in my magpul fpg.
The TM Glock is better. The KSC's feed ramp is a separate piece and made out of cheap plastic and isn't as sturdy or reliable as TM's design. Not to mention the TM is exponentially more accurate and has far better range.
my friend's magpul fpg's (kwa internals) feed ramp exploded twice
[QUOTE=the_killer24;35739708]my friend's magpul fpg's (kwa internals) feed ramp exploded twice[/QUOTE] case and point
I have this: [url]http://www.evike.com/product_info.php?cPath=21_44_219&products_id=37369[/url] And I was wondering if it would work with these? And if it's a stupid buy... [url]http://www.airsoftgi.com/product_info.php?products_id=4717[/url] [url]http://www.airsoftgi.com/product_info.php?products_id=2357[/url]
Would not purchase handguard, Suppressor should work.
I have the handguard, and I can sell it to you for like $20 bucks if you want it.
Just got word back; 36 acres of land from a local airsofting group are willing to co-operate to put together an Event. What type of event should I do? Something Fallout/STALKER/Cool rpg with shooting you can think of related, or real scenario milsim game.
Got a problem with my A&K M249 SAW. First it wasn't feeding properly, so I tried pushing the barrel and spring in into the groove of the gearbox and held it tight. The gun is strange, sometimes It won't fire unless I push the barrel in. So, now it's getting feedage problems and the motor started getting really sluggish in dry fire. I don't want to mess it up even more, any help? [img]http://i0.kym-cdn.com/photos/images/newsfeed/000/234/767/8d0.jpg[/img]
are you running the box mag the box mag feeds terribly also if your motor is fucked replace it g&p short m120 is good
Sorry, you need to Log In to post a reply to this thread.