• The Official Questions Thread V. Labor Union Propaganda
    8,881 replies, posted
[QUOTE=10050;35851605]Okay I've got 2 Choices. KJW M-1911 with a Holy cow extra mag: [url]http://www.evike.com/product_info.php?products_id=28652[/url] KWC/Elite Force 1911: [url]http://www.evike.com/product_info.php?products_id=37722[/url][/QUOTE] kjw
[QUOTE=10050;35851605]Okay I've got 2 Choices. KJW M-1911 with a Holy cow extra mag: [url]http://www.evike.com/product_info.php?products_id=28652[/url] KWC/Elite Force 1911: [url]http://www.evike.com/product_info.php?products_id=37722[/url][/QUOTE] Neither. Both are terrible.
Official rule to remember: If its a metal single stack 1911, its bad. Either get a HiCapa or get a TM, single stack mags just can't hold enough gas.
Unless you're getting a TM or WA single stack. Those are wonderful.
[QUOTE=TacticalHijack;35852485]Unless you're getting a TM or WA single stack. Those are wonderful.[/QUOTE] That's why I said metal, neither of those come default in metal.
However, even once upgraded with Guarder, SD, and other aftermarket externals they still shoot wonderfully. My TM with a metal slide can get something like 1.5-2 mags off per fill of gas. I think you mean [I]clone[/I] single stack 1911s.
[QUOTE=catbarf;35843375]Your friend is incorrect. The actual voltage is dependent upon load conditions. For example, if you took a 9V Duracell and wired it into your airsoft gun, it wouldn't budge. With the current draw the airsoft gun requires, the voltage would drop to something miniscule and useless. Because of this, you can't really get a good reading of a battery voltage besides an overall ballpark figure. If it works properly, and there's no swelling or expansion of the pack, it's safe.[/QUOTE] Ah, I see. Thanks for the info. One more thing, I'm using this charger to charge my lipo batteries: [url]http://www.airsplat.com/Items/AC-BC-IMAX-E3.htm[/url] I think this charger might be messing up my batteries; Not too sure. Anyone else have any experience with this model?
Do you guys prefer .23 or .25 for outdoor airsoft on a okay day? I was wondering because I just aquired 60 bucks and want to get some more BB's, and was wondering which I should get for my AKS-74U
.25 or .28
.25 god tier
.28s or .3s
I use .3
Which reminds me, my furthest shooting gun is my M4. Which is funny because it's only shooting ~260ish with .28s and the hop up chamber and bucking are completely stock, not-to-mention about 4 or 5 years old, and of the old-style Echo 1/JG 2-piece variety. Somehow this thing shoots over 200 feet.
What size o-rings should be used on KJW 1911 mags? I'm fixing two for a friend.
for which part of the mag?
I *think* it's the fill valve, but he's just told me this over Facebook, so I'm going off of nothing here.
I was thinking about using .3s next time I go out.
My brother held the Elite Force 1911, and supposedly him and some store guys said it was surprisingly not bad.
Why would you use above .28s? Your bbs are just stupidly slow and easy to dodge.
[QUOTE=Psycoace2;35855926]I *think* it's the fill valve, but he's just told me this over Facebook, so I'm going off of nothing here.[/QUOTE] If it's the fill valve you'll need these [url]http://www.amazon.com/002-Silicone-O-Ring-Durometer-Width/dp/B000FMYEO6/ref=pd_ybh_22[/url] [editline]6th May 2012[/editline] [QUOTE=FPKawaii;35856172]Why would you use above .28s? Your bbs are just stupidly slow and easy to dodge.[/QUOTE] With my 10/22 if I use anything less than .32s the bbs go sky high after like 50 feet.
[QUOTE=Psycoace2;35855827]What size o-rings should be used on KJW 1911 mags? I'm fixing two for a friend.[/QUOTE] Protip, I think he's just encountering the 1911 single stack + metal slide issue. I have the same thing, I thought it was the mags, but its just the gun to my knowledge.
Ok so I got these p mags, and every time I shoot my g&p m4 it seems like every one comes loose and i have to push the mag into the well a little, and it clicks. Are the mags just shit? Becsuse the mag that came with my gun feeds perfectly, and they used to feed just fine.
what brand are the pmags because if they're beta project they're supposed to be incredibly bad
[QUOTE=the_killer24;35861666]what brand are the pmags because if they're beta project they're supposed to be incredibly bad[/QUOTE] my beta projects were perfect until i fucked with the mag release and it still feeds fine but wobbles before fucking with mag release they were rock solid
[QUOTE=zezsniper;35861155]Ok so I got these p mags, and every time I shoot my g&p m4 it seems like every one comes loose and i have to push the mag into the well a little, and it clicks. Are the mags just shit? Becsuse the mag that came with my gun feeds perfectly, and they used to feed just fine.[/QUOTE] With my G&P I had to "Break in the mag catch" I basically had to slam a few mags in about 60 times and then my MAG and Pmags worked.
Anyone have any experience with the Cm031 or should I just save for Cm048 Wait, fuck that, G&G L85A2 here i come
[QUOTE=notrabies;35859218]Protip, I think he's just encountering the 1911 single stack + metal slide issue. I have the same thing, I thought it was the mags, but its just the gun to my knowledge.[/QUOTE] Well his issue is all of the gas is expelling as soon as he puts it in the mag, has nothing to do with the gun afaik.
Is there anywhere I can get a smooth receiver cover for my ak74m? I know some brands like vfc have it stock.
[QUOTE=Psycoace2;35864191]Well his issue is all of the gas is expelling as soon as he puts it in the mag, has nothing to do with the gun afaik.[/QUOTE] He has a problem with his valve knocker.
My UTG Accushot Shadow Ops sniper rifle's magazine has a bad problem. When I shoot, the rods in the magazine come out some and it gets really difficult to get them out of the magwell, far enough that I almost had to field strip. Does anyone know why?
Sorry, you need to Log In to post a reply to this thread.