• A new case
    30 replies, posted
Hey face punch. You may have seen my build log thread somewhere around here. I'm thinking about putting a new case on the list for it. I'm looking toward getting a case with a black inside. It doesn't have to be, I can always paint the interior. To start with I thought of getting the cm sniper case. It's okay but I think the top is a bit ugly. I then took a look at Zalman cases. Not sure which to gt though. If any one could help me' out at all. I like the GT1000, but tell me' what you think of it. Budget can probably stretch to £160 Best case pls Looking for easy cable management. Country UK EDIT I should also add, Mid tower would be nice, I like brushed metal effect, I would like it cool and quiet (if possible by standard), and I prefer bottom mounted psu ability with good cable management.
[url]http://www.ebuyer.com/product/219021[/url] is worth the extra if you can't stretch that far, [url]http://www.ebuyer.com/product/222943[/url] [editline]07:34PM[/editline] or look at some Lian Lis
[QUOTE=reapaninja;23233164][url]http://www.ebuyer.com/product/219021[/url] is worth the extra if you can't stretch that far, [url]http://www.ebuyer.com/product/222943[/url][/QUOTE] OH I should have mentioned that the smaller the better. I prefer mid tower. I don't really like the had cases that much, and Lian li's cable management is poor, basically the same as what I have atm I have a Hiper osiris atm. I could do a case mod. But I dont know the first thing about case mods
Lancool K62 Or coolermaster 690 II but the lancool has a nice window, 4 big fans, completely tool less design, and goo cable management
But they're both so ugly. Anyway I think what i'll do is stick with my current case and try to case mod the doors. Without ruining them. I need some one with experience to help me really, lol. Thanks for the suggestions.
Get [url]http://www.scan.co.uk/Products/Coolermaster-ATCS-840-Classic-Full-Tower-Aluminum-Case-Black-w-o-PSU[/url] or this is cheaper [url]http://www.scan.co.uk/Products/Fractal-Design-Define-R2-Black-Noise-Absorbing-x10-Bay-ATX-Case-inc-Front-I-O[/url]
Ooooh, I like that first one. Thanks. I'll take it into consideration. I was looking at the corsair cases, and I think i'll wait to see what price range thhe 600T is going to be in, because I like to look of that too. Thanks though ^^ EDIT: Shame it's full tower. It's pretty much exactly what I'm looking for.
The ATCS is really nice. I recommend it. Why does it have to be Mid-tower?
because it's fucking pointless having anything larger than that
Not really. Room is nice.
Just got this case [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16811815001[/url] I loves it
[QUOTE=power fuse0;23281359]But they're both so ugly. Anyway I think what i'll do is stick with my current case and try to case mod the doors. Without ruining them. I need some one with experience to help me really, lol. Thanks for the suggestions.[/QUOTE] shove 20 pounds more in and you can get most manly case in the market [url]http://www.scan.co.uk/Products/Lian-Li-PC-A77B-Aluminium-Black-Case-No-Psu[/url]
Get [url=http://www.newegg.com/Product/Product.aspx?Item=N82E16811119225&cm_re=HAF_X-_-11-119-225-_-Product]This[/url] Case.
[QUOTE=cryticfarm;23301221]shove 20 pounds more in and you can get most manly case in the market [url]http://www.scan.co.uk/Products/Lian-Li-PC-A77B-Aluminium-Black-Case-No-Psu[/url][/QUOTE] WOW Anyway HAF, to me, are the most ricer-shit cases in the world. Go lian-li or [url]http://www.scan.co.uk/Products/Coole...-Black-w-o-PSU[/url]
CM ADVANCED II nuff said
I dont see the point on spending more on a case than you would on a processor or motherboard. Or anything for that matter. [editline]05:35PM[/editline] HAF 922 is what you want, unless you dont like how it looks.
[QUOTE=InsanePyro;23301168]Just got this case [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16811815001[/url] I loves it[/QUOTE] I have that also, very nice
[QUOTE=tommyc225;23304825]I dont see the point on spending more on a case than you would on a processor or motherboard. Or anything for that matter. [editline]05:35PM[/editline] HAF 922 is what you want, unless you dont like how it looks.[/QUOTE] Spent £170 on my motherboard. £160 on the processor and £100 on the ram I wouldn't mind spending up too £180 on a case, but it's just getting the funds together <_<. Also, whoever asked for why should it be mid tower? I'd like to fit it onto my desk. EDIT: I also think the haf is really ugly. It's not sleek, the plastic on it looks horrible and the edges are so, idk nasty. I don't think it's a bad case, I just think it's ugly.
Wait for the 600T to come out? [url]http://www.corsair.com/products/600t/default.aspx[/url]
tbh i think the 600t doesn't look really good i'm not a big fat of the curvy smoothed corner stuff but if it suit's OPs tastes...
[url]http://www.newegg.com/Product/Product.aspx?Item=N82E16811133089&cm_re=level_10-_-11-133-089-_-Product[/url] ????
[QUOTE=Wave160;23305959]Wait for the 600T to come out? [url]http://www.corsair.com/products/600t/default.aspx[/url][/QUOTE] I am [QUOTE=cryticfarm;23306089]tbh i think the 600t doesn't look really good i'm not a big fat of the curvy smoothed corner stuff but if it suit's OPs tastes...[/QUOTE] It looks alright to me. [QUOTE=Mattk50;23306259][url]http://www.newegg.com/Product/Product.aspx?Item=N82E16811133089&cm_re=level_10-_-11-133-089-_-Product[/url] Fugly. Thanks for all the suggestions though guys. ^^ ????[/QUOTE]
[QUOTE=rampageturke;23305337]I have that also, very nice[/QUOTE] I love how many fans you can put in it and its not even a full tower
[QUOTE=derlicious;23297981]Get [url]http://www.scan.co.uk/Products/Coolermaster-ATCS-840-Classic-Full-Tower-Aluminum-Case-Black-w-o-PSU[/url] or this is cheaper [url]http://www.scan.co.uk/Products/Fractal-Design-Define-R2-Black-Noise-Absorbing-x10-Bay-ATX-Case-inc-Front-I-O[/url][/QUOTE] I think the 1st one is too basic, the 2nd one looks good though.
600t looks too curvy go with an atcs
[QUOTE=derlicious;23315139]600t looks too curvy go with an atcs[/QUOTE] What I think i'll do is wait and see the price on the 600t. The curves are rather nice, but I'll probably send it off to have the brushed metal effect put into it [QUOTE=zackh;23309011]I think the 1st one is too basic, the 2nd one looks good though.[/QUOTE] How is it too basic? ___ Also, how easy do you reckon it would be to find a company that would do brushed metal anodising? Or however it's done
xigmatech utgard
[QUOTE=HenryB;23325795]xigmatech utgard[/QUOTE] Yeah that looks nice, but I prefer the corsair one.
[QUOTE=zackh;23309011]I think the 1st one is too basic, the 2nd one looks good though.[/QUOTE] Just because you probably like bloo neons and stuff. I love [url]http://www.scan.co.uk/Products/Coolermaster-ATCS-840-Classic-Full-Tower-Aluminum-Case-Black-w-o-PSU[/url] Nice and elegant, i love how the sides curve. It's amazing build quality aswell
[QUOTE=derlicious;23329372]Just because you probably like bloo neons and stuff. I love [url]http://www.scan.co.uk/Products/Coolermaster-ATCS-840-Classic-Full-Tower-Aluminum-Case-Black-w-o-PSU[/url] Nice and elegant, i love how the sides curve. It's amazing build quality aswell[/QUOTE] Yeah I'm considering that. I'm thinking either that or the corsair 600t, i'll wait till the end of the summer and see the price and a few reviews on the corsair before deciding probably. Unless something better than both comes up and smacks me in the face. Like a Zalman GT1000 for less than £100 lol Not likely
Sorry, you need to Log In to post a reply to this thread.