I just finished building my computer. I have everything correctly connected -- all the lights are on, front USB ports are functional, etc. But when I attempt to start the computer with crossfire (2 X 5850s), I get no display. I have tried from each DVI port, but no display. I have tried even removing both of the crossfire strips from the cards and trying each DVI port separately. Nothing works. Any ideas on what's wrong?
EDIT:
Yes, I do have the PCI-E cords connected to the cards from the PSU.
what wattage is your psu? and make?
750w Corsair
use the integrated graphics and install the drivers
my motherboard doesn't have integrated graphics
Do the fans on the cards spin up?
[QUOTE=Keithoms;20459837]Do the fans on the cards spin up?[/QUOTE]
Yes they do
do you have an old card to see if the motherboard PCI lanes are faulty
[QUOTE=rampageturke;20459968]do you have an old card to see if the motherboard PCI lanes are faulty[/QUOTE]
no i dont
[editline]06:55PM[/editline]
I'm now getting 6O or 60 (can't tell) and B2 and B6 on the debug LCD on the motherboard.
[editline]07:10PM[/editline]
Now the monitor turns on, but the comp turns off in about 10-15 sec
[editline]07:20PM[/editline]
Also when the cd drive is plugged into the sata it crashes, but when its not, it gets farther along the boot.
Sorry, you need to Log In to post a reply to this thread.