• PC turns on but does nothing (no beeps)
    4 replies, posted
Whenever i start up my newley built PC everything starts up but there are no Beeps and nothing boots or appears on screen, any help? >Motherboard is new, replaced old one >Tested with 2 graphics cards, same thing happens >All fans in PC are running fine >Everything works once plugged in but PC refuses to boot >No resets or Beeps when turned on >Noises / flashes of Harddrive working >Using all these parts: [URL="https://www.dropbox.com/s/94e3m3m5gy5ad0g/Reece PC.xlsx"]https://www.dropbox.com/s/94e3m3m5gy...eece PC.xlsx[/URL] >When the RAM is removed there is 4 beeps, so Beeps are working >BeepBoop
Try new CMOS battery, or Different RAM sticks [if generates beeps once removed] Although if you can't even get to BIOS I'm stumped, sorry. Edit> although quick browse showed someone with 'Similar' problems and it was Faulty/"Dead" PSU and had taken MOBO with it, So if it is your PSU you may have just taken a new MOBO out aswell as the old one.
i'll look into returning/buying a new PSU Anyone else got suggestions?
Make sure the CPU power cable is plugged in located near the CPU itself. You've installed Motherboard legs, right?
[QUOTE=Ruzza;39898601]Make sure the CPU power cable is plugged in located near the CPU itself. You've installed Motherboard legs, right?[/QUOTE] Yes i have installed Motherboard legs My Power cable came with an 8 pin connecter with latches that could be taken apart to make 2 4 pin connectors, the plug on the motherboard is 4 pin [editline]13th March 2013[/editline] It seems to be a power problem, i'll borrow a new PSU of a friend, see if that works
Sorry, you need to Log In to post a reply to this thread.