• 'new' PC build - no POSTs, a black screen and no beeps
    6 replies, posted
CPU: i7 920 Cooler: Hyper TX3 Evo Motherboard: Asus Rampage II Gene Case: Fractal Core 1300 RAM: Kingston 2x4gb DDR3-1333 at 1.50v GPU: Asus GTX 770 PSU: Corsair VS650 HDD: generic 500gb harddrive etc: some old dvd pata drive I've built it and when starting up it doesn't post at all nor beep and the fans do start up though. I tried to: - Switch the ram sticks to different ram slots - Run it with only one ram - Use a different graphics card - Use a different power supply - Run it without the dvd drive - Use asus's memfix (all it did was flash a red light) - Rewire the front panel but nothing worked, i'm assuming some part is dead but i have no idea which one.
Any bent pins on the CPU socket? That was an issue I just had.
Did you use motherboard standoffs?
[QUOTE=taipan;49475805]Did you use motherboard standoffs?[/QUOTE] yes [QUOTE=Terin7;49472487]Any bent pins on the CPU socket? That was an issue I just had.[/QUOTE] [QUOTE=Handsome Matt;49472141]does it beep with no RAM or can you get to bios with no RAM?[/QUOTE] I decided to remove the cpu and refit it (no bent pins) and i removed the memory sticks at the same time. It beeped the error message for no memory and then i decided to re-add the sticks and it posted. Thanks for your help. [img]http://i.imgur.com/hUD0rK3.png[/img]
[QUOTE=Flarey;49479216]yes I decided to remove the cpu and refit it (no bent pins) and i removed the memory sticks at the same time. It beeped the error message for no memory and then i decided to re-add the sticks and it posted. Thanks for your help. [img]http://i.imgur.com/hUD0rK3.png[/img][/QUOTE] Any particular reason why your CPU is hotter than everything else?
Sorry, you need to Log In to post a reply to this thread.