• Just ordered my build, Need assembly instructions.
    28 replies, posted
As title says. The rest of my build is on the way, what I need now is a good tutorial on how to put the thing together. I need one that's easy to understand, as this is my first time building a PC
[url=http://lmgtfy.com/?q=How+to+assemble+a+desktop+PC]Here you go[/url] :snoop:
Google is your friend
You know you could've done your homework BEFORE ordering the parts, right? Anyway, like leontodd said, Google is your friend.
Are you sure your parts are compatible with each other? Research first next time.
[QUOTE=ph0ne;21359881]You know you could've done your homework BEFORE ordering the parts, right? Anyway, like leontodd said, Google is your friend.[/QUOTE] Or he could learn how to build it while he waits. Go troll elsewhere. Also, OP, youtube has a lot of videos showing you how to put together a pc. Since it's video feed and not text, it should be easier to follow and visualize for your own build.
General tips I always give: Take your time. Don't do this in a rush "omg I have to have this done by 5!" mode. Assemble only what you need to install your OS and get to the desktop. This means if you have more than one of something(two memory sticks, two optical drives, etc) only install the one you need. This makes it easier to troubleshoot any problems if they crop up. Once your OS is installed and the computer seems stable, you can start adding in the other components, one by one, testing the computer each time. This seems tedious, and it is in a way, but IF you have problems this method will save you a lot of time trying to figure out which component is the source. Don't force anything. At most you'll need to jiggle a part back and forth to get it to fit. Once you find yourself starting to put real pressure on a component, back off. Examine the part and the slot and try again, without force. Chances are you are doing something wrong if you have to struggle with it. Most things these days can only fit one way, so it's not that hard. Resist the temptation to crank up the settings for performance right away. Your main goal should be to have a stable computer. This means no overclocking, don't use aggressive settings for your memory, and so on. All that can wait till you are comfortable with how your new computer functions in 'normal' use.
This should help with assembling, but make sure to read your manuals: [media]http://www.youtube.com/watch?v=rdsUuWlhOvo[/media]
Thanks guys, And yes my parts are compatible, I had a friend double check them all (He has "Experience")
[QUOTE=GamerKiwi;21361014]This should help with assembling, but make sure to read your manuals: [media]http://www.youtube.com/watch?v=rdsUuWlhOvo[/media][/QUOTE] Dont forget to put the sticker on or it wont work!
[QUOTE=Evilan;21360517]Or he could learn how to build it while he waits. Go troll elsewhere. Also, OP, youtube has a lot of videos showing you how to put together a pc. Since it's video feed and not text, it should be easier to follow and visualize for your own build.[/QUOTE] Uhh, if you don't know how to build a PC, how would you know what parts are compatible with eachother
It's pretty easy. 1: Go to hardware and software section. 2: Ask them to build you the best pc for your money. 3: Wait 2 days for the thread to die down. 4: pick the final agreed upon build. 5: Profit.
Pro tip: Use standoffs.
[QUOTE=Kylel999;21373231]Uhh, if you don't know how to build a PC, how would you know what parts are compatible with eachother[/QUOTE] Easily?
[QUOTE=Blarg190;21373630]Pro tip: Use standoffs.[/QUOTE] Can not stress this enough. For me it was easy to know I needed them, my case came with a pack and everything was lifted to make sure you USED them. But some people don't.. and ZAP goes the MoBo and all your stuff.
[QUOTE=Kylel999;21373231]Uhh, if you don't know how to build a PC, how would you know what parts are compatible with eachother[/QUOTE] Uhh, if you don't know how to read a thread, how would you know what the fuck is going on? [QUOTE=PopLot;21363950]Thanks guys, And yes my parts are compatible, I had a friend double check them all (He has "Experience")[/QUOTE]
[QUOTE=Razzie;21407132]Can not stress this enough. For me it was easy to know I needed them, my case came with a pack and everything was lifted to make sure you USED them. But some people don't.. and ZAP goes the MoBo and all your stuff.[/QUOTE] Wow, you're a moron.
[QUOTE=ph0ne;21407445]Wow, you're a moron.[/QUOTE] Wow, you're a troll! nuff said
[QUOTE=ph0ne;21407445]Wow, you're a moron.[/QUOTE] Why?
Don't feed the troll... He have raged on this sub-forum for quite a time, and I don't think he's about to stop.
whats that website that has the 3D model directions
[b]Don't forget the standoffs.[/b] [QUOTE=OCELOT323;21412570]whats that website that has the 3D model directions[/QUOTE] [url]http://www.pcityourself.com/building/processor.php[/url]
I've built computers for years and I can answer that question. EVERYONE on this forum seems to be trolling you today, so I will give you the real deal. Here's some saftey procautions for you to study before building: First, NEVER use standoffs. Standoffs are highly conductive and are meant to be used on the DVI/VGA plugs. Second, make sure your workstation is in as wet of an environment as possible. Your bathroom counter would make the perfect workstation. Third, ALWAYS work on a carpet surface. When you work on a carpet surface, the static you accumulate travels into the carpet and because of the complexity of the carpet, it gets "lost" because it has nowhere to go and deteriorates. So you should always shuffle your feet along the carpet surface as much as you can to deter as much electricity as possible from your workstation. A bathroom mat would do the job. You can make it stay in place by supergluing it to the floor. If you work on a solid surface on the other hand, the static will go in a straight line along the floor, up the wall, along the ceiling, down the other wall, etc. etc. etc. Until it reaches your workstation again. Not good. Finally, always work on a windy day. Wind carries static away from places, where if it's not windy it will sit there and collect. If you want an actual building guide, just let me know! Best wishes, ~Doug
[QUOTE=Lord Douglas;21418226]I've built computers for years and I can answer that question. EVERYONE on this forum seems to be trolling you today, so I will give you the real deal. Here's some saftey procautions for you to study before building: First, NEVER use standoffs. Standoffs are highly conductive and are meant to be used on the DVI/VGA plugs. [B]Second, make sure your workstation is in as wet of an environment as possible. Your bathroom counter would make the perfect workstation.[/B] Third, ALWAYS work on a carpet surface. When you work on a carpet surface, the static you accumulate travels into the carpet and because of the complexity of the carpet, it gets "lost" because it has nowhere to go and deteriorates. So you should always shuffle your feet along the carpet surface as much as you can to deter as much electricity as possible from your workstation. A bathroom mat would do the job. You can make it stay in place by supergluing it to the floor. If you work on a solid surface on the other hand, the static will go in a straight line along the floor, up the wall, along the ceiling, down the other wall, etc. etc. etc. Until it reaches your workstation again. Not good. Finally, always work on a windy day. Wind carries static away from places, where if it's not windy it will sit there and collect. If you want an actual building guide, just let me know! Best wishes, ~Doug[/QUOTE] This might have worked if you left that bit out, too obviously wrong
[QUOTE=Elecbullet;21418522]This might have worked if you left that bit out, too obviously wrong[/QUOTE] Droplets of water collect static.
[QUOTE=Lord Douglas;21418226]I've built computers for years and I can answer that question. EVERYONE on this forum seems to be trolling you today, so I will give you the real deal. Here's some saftey procautions for you to study before building: First, NEVER use standoffs. Standoffs are highly conductive and are meant to be used on the DVI/VGA plugs. Second, make sure your workstation is in as wet of an environment as possible. Your bathroom counter would make the perfect workstation. Third, ALWAYS work on a carpet surface. When you work on a carpet surface, the static you accumulate travels into the carpet and because of the complexity of the carpet, it gets "lost" because it has nowhere to go and deteriorates. So you should always shuffle your feet along the carpet surface as much as you can to deter as much electricity as possible from your workstation. A bathroom mat would do the job. You can make it stay in place by supergluing it to the floor. If you work on a solid surface on the other hand, the static will go in a straight line along the floor, up the wall, along the ceiling, down the other wall, etc. etc. etc. Until it reaches your workstation again. Not good. Finally, always work on a windy day. Wind carries static away from places, where if it's not windy it will sit there and collect. If you want an actual building guide, just let me know! Best wishes, ~Doug[/QUOTE] really now, that's just really being a douchebag, you could make the op blow thousands of dollars
[QUOTE=Lord Douglas;21418226]I've built computers for years and I can answer that question. EVERYONE on this forum seems to be trolling you today, so I will give you the real deal. Here's some saftey procautions for you to study before building: First, NEVER use standoffs. Standoffs are highly conductive and are meant to be used on the DVI/VGA plugs. Second, make sure your workstation is in as wet of an environment as possible. Your bathroom counter would make the perfect workstation. Third, ALWAYS work on a carpet surface. When you work on a carpet surface, the static you accumulate travels into the carpet and because of the complexity of the carpet, it gets "lost" because it has nowhere to go and deteriorates. So you should always shuffle your feet along the carpet surface as much as you can to deter as much electricity as possible from your workstation. A bathroom mat would do the job. You can make it stay in place by supergluing it to the floor. If you work on a solid surface on the other hand, the static will go in a straight line along the floor, up the wall, along the ceiling, down the other wall, etc. etc. etc. Until it reaches your workstation again. Not good. Finally, always work on a windy day. Wind carries static away from places, where if it's not windy it will sit there and collect. If you want an actual building guide, just let me know! Best wishes, ~Doug[/QUOTE] Funny. But douchebaggery for a new builder. Do the exact opposite of what this man says and you'll be fine building your pc.
[QUOTE=Lord Douglas;21418226]Make sure your workstation is in as wet of an environment as possible. Your bathroom counter would make the perfect workstation. If you want an actual building guide, just let me know! Best wishes, ~Doug[/QUOTE] [img]http://img210.imageshack.us/img210/4528/junglem.jpg[/img] Did I do it right?!? It doesn't seem to work.. Maybe i've done something wrong?
[QUOTE=Elecbullet;21418522]This might have worked if you left that bit out, too obviously wrong[/QUOTE] He is sort of correct, the dryer the air is the more chance of static build-up
Sorry, you need to Log In to post a reply to this thread.