What guns do you wish were made for Airsoft V3 - bladerunner gun and an-94 pls
886 replies, posted
Post guns you want made for airsoft. Hell, even post gear, extras and accessories you feel that should be made
as the title suggests:
[img]http://www.imfdb.org/images/8/8d/HERO1.jpg[/img]
[img]http://t1.gstatic.com/images?q=tbn:ANd9GcS4aCrRZv8AUa6y1GqzVH1mwgYoQREnZ_Kqzoy8s05ssN-q3B8b[/img]
[IMG]http://i307.photobucket.com/albums/nn304/BookHound/suppressors/pistols/osprey45KimberLarge.jpg[/IMG]
I need this so bad
Ive asked multiple places that do "custom supressors" but none of them can make the Osprey supressor. I cant die happy until I have one. even if its hollow.
That's most likely because you can't make it on a lathe because of its shape, you'd probably need a full CNC mill.
just dont want to run into any bullshit about "oh I dont know I think that's illegal". figure I wouldnt have this problem with a place that already makes airsoft suppressors.
I cant believe that i never noticed until now that the 5.56 pistol in FO:NV is the bladerunner pistol.
[QUOTE=notrabies;39744650]That's most likely because you can't make it on a lathe because of its shape, you'd probably need a full CNC mill.[/QUOTE]
Not true at all. Could all be done using manual mill and lathe. Make the overall shape on a milling machine first. You could try to bore out the inside of it, but you can only go so far before your tools start chattering. After the mill work is complete put it into a lathe using a 4 jaw chuck to hold the part offset and drill a hole through it, then finish it off with a -14x1mm tap. Honestly I could do it, but the only thing that would stump me is drilling a hole through it that long. Would probably need a special drill and extra setup stuff I don't know about.
[QUOTE=Fish Muffin;39745252]I cant believe that i never noticed until now that the 5.56 pistol in FO:NV is the bladerunner pistol.[/QUOTE]
Its funny cause Herf would always show that gun to me whenever he was playing while I was over. Then I was just browsing the FO wiki a few months ago and saw it and realized. My mind was blown.
[t]http://pics.livejournal.com/_consume_/pic/0028xw0t[/t]
Even COD kids will buy it.. because apparently it was in Call of Duty despite it being a domestically produced firearm forbidden from export and never used in a major conflict.
DUDE IMMA BE A RUSSIAN SNIPER PEW PEW WITH MY WA2000
U MEEN WAY TWOO KAYY?
NO U SCRUB ITS WAZOO
russians use TARs right?
Yes, and G18C's with extended magwells and 50 round mags.
don't forget the standard issue armsel strikers
[img]http://www.firearmsworld.net/fn/scar/ss10_338.jpg[/img]
I know the scar SSR is already kind of a thing, but it uses the vanilla SCAR stock which really bugs me. The real SCAR SSR stock is so much sexier
[editline]2nd March 2013[/editline]
Also short low-profile SCAR-H mags
I know a guy selling an SSR if you're intredasted
he doesn't want an SSR because none of them have the right SSR stock; that was the point of his gripe lol
HK-417 with the G3 magwell would be pretty fucking sweet
[IMG]http://www.hkpro.com/hk417.jpg[/IMG]
[QUOTE=Kill001;39786094]HK-417 with the G3 magwell would be pretty fucking sweet
[IMG]http://www.hkpro.com/hk417.jpg[/IMG][/QUOTE]
IIRC, the G3 magwell was only for the prototype
they should have kept it imo, it'd make at least 1% parts compatibility with the G3 so users that were already equipped with g3s wouldn't have to buy retarded clippymags
But I do believe that the current configuration is compatible with SR25/AR10 magazines though
how many German and Western European armies use SR-25s and AR-10s compared to the number that use G3s though :\
[QUOTE=felix the cat;39787665]But I do believe that the current configuration is compatible with SR25/AR10 magazines though[/QUOTE]
Nope. They're proprietary mags, much wider than SR25/M110/AR10 mags.
[QUOTE=xXEnder007Xx;39788788]Nope. They're proprietary mags, much wider than SR25/M110/AR10 mags.[/QUOTE]
The real steel is proprietary too?
I would imagine, as 417 mags are a lot bulkier than STANAG 7.62s
[QUOTE=TaiwanesePrick;39777810]he doesn't want an SSR because none of them have the right SSR stock; that was the point of his gripe lol[/QUOTE]
a shitty stock'd SSR is better than no SSR v:v:v I can always after-modify it
[editline]3rd March 2013[/editline]
[QUOTE=Kath;39776577]I know a guy selling an SSR if you're intredasted[/QUOTE]
Hit me up niggah
Call of duty hate aside, I actually really like the whole aesthetic and compactness of this thing
[IMG]http://prestigedaily.com/wp-content/uploads/2013/01/PDW-57-Black-Ops-2-Weapon-Guide-YouTube-600x349.png[/IMG]
Needs some improvement though, the grip looks hideous and uncomfortable. Replace that with the grip from the magpul PDR, and you've got something good. I wonder if you could hack a p90 to a point where it slightly resembles that.
Also what I've started to grow upon is the Chicom CQB:
[img]http://images4.wikia.nocookie.net/__cb20121213083543/callofduty/images/a/ac/Chicom_CQB_Menu_Icon_BOII.png[/img]
However it's starting to look more like a bastardised famas - reminding me of one from CS:S
[img]http://files.gamebanana.com/img/ss/skins/29311.jpg[/img]
[b](proportion? what's that?)[/b]
Seriously however I'd love a famas that looks just like the one above, would be comfortable, nice to look at , and it wouldn't have a picatinny rail a mile away from the barrel.
A dremel and some superglue can do anything!
Sorry, you need to Log In to post a reply to this thread.