What material do I need to get to make a Window for my case?

[Sgt Pringles]

Basic question, what type of material do I need to buy to install it into my case to make a nice window for the side of the case? the case already has the hole cut, as there was a mesh on the side before. also once I have the material for the window what to I use to stick it to teh case?

[Garrot]

A window

[FFStudios]

Plastic/Plate glass, and probably some industrial glue I'd think.

I've never really glued glass so glue may not be the best for glass, but for a plastic window stuff like Gorilla Glue is best.

[nos217]

Fibre glass I think.

[Von Kluth]

A piece of transperent plastic/glass + glue strong enough to hold the weight?

If you go with plastic (which you should), just use the strongest glue you can get your hands on.
The weight of plastic is low so almost any glue should do it...

[gerbils_alt_2]

Plexiglas would be good probably.

[Emtu]

Plexiglass and some good quality double sided tape works well. You might also want to get some u-channel to give it a little more style.

[Sgt Pringles]

[QUOTE=M2k3;18549139]Plexiglass and some good quality double sided tape works well. You might also want to get some u-channel to give it a little more style.[/QUOTE]

Thanks for the help guys, will make sure I grab some plexiglass and that tape, I wont require u-channel as this is what the hole looks like (minus the mesh)
[img]http://www.fast-tek.co.uk/graphics/detail_images/1733b.jpg[/img]

[sbradford26]

[QUOTE=Sgt Pringles;18551864]Thanks for the help guys, will make sure I grab some plexiglass and that tape, I wont require u-channel as this is what the hole looks like (minus the mesh)
[img]http://www.fast-tek.co.uk/graphics/detail_images/1733b.jpg[/img][/QUOTE]

Just get some bolts and drill hole sin the plexi glass and bolt it to the frame where the mess is.

[admiral_Cola]

[QUOTE=sbradford26;18552213]Just get some bolts and drill hole sin the plexi glass and bolt it to the frame where the mess is.[/QUOTE]

Drill some holes for ventilation as well!

[Sgt Pringles]

That wcould work with the drilling, I think I would choose that over the tape, depends on what resources I have access to at the time.

[QUOTE=admiral_Cola;18552319]Drill some holes for ventilation as well![/QUOTE]

Its ok, im gonna have a nice big 12CM sucking all the air out of the back of the case and if I can fit a 8cm fan in the front taking it in
:clint: