• Master Blaster (Slow Mo Paintball SHOTGUN)
    34 replies, posted
[video=youtube;HsTlpMPWHlA]http://www.youtube.com/watch?v=HsTlpMPWHlA[/video] Woah, that's a shitload of paintballs.
Is that Niko?
Thats awesome.
the part where he started playing the gun like a guitar cemented the fact that this video is awesome
Very creative, awesome!
I didn't know paintballs bounced off so often
They do when the pressure is so low.
MASTER BLASTER RUN BARTERTOWN
That was neat-o!
I noticed that when the 'blaster' was doing a fisticuffs pose, he was bare-fisted. Then, when he got shot because his gun was hijacked, he had gloves on. Inconsistencies, hurrah!
Cool, but all the paintballs bouncing off left me unsatisfied.
Its just a ball valve airgun, nothing to powerful. Now if they had used a piston valved one then oh boy, they'd all be on the ground.
It looks a bit weak Slow motion bits looks awesome though
[QUOTE=ZestyLemons;31147708]I didn't know paintballs bounced off so often[/QUOTE] They also bounce on baggy clothes, thats why paintballers have baggy clothes. Also the pressure is low because nobody wants to get hit with that many bullets in one shot with a high pressure, with normal paintball pressure you break the skin in certain areas of the body.
Didn't seem that powerful. Hardly any of the balls broke.
If all the balls broke the slo-mo scenes would have been SICKNASTY.
The reason why none of the paintballs broke was because they weren't traveling at a high enough speed. Or they were just using shitty paintballs. I play all the time and they almost never bounce.
Also calling your hits in Airsoft isn't that big a problem. Usually they hurt like a bitch and you call out just to get them to stop shooting you. The only time people don't call hits at my field are when there are little kids who came for the day, in which case they probably can't shoot for shit anyway.
[QUOTE=CodeMonkey3;31153608]Also calling your hits in Airsoft isn't that big a problem. Usually they hurt like a bitch and you call out just to get them to stop shooting you. The only time people don't call hits at my field are when there are little kids who came for the day, in which case they probably can't shoot for shit anyway.[/QUOTE] Airsoft hurts so much, but its so fun.
[QUOTE=Jetblack357;31153784]Airsoft hurts so much, but its so fun.[/QUOTE] IMO after playing alot of paintball and going over to airsoft i didnt even care about getting hit it just didnt hurt.
[QUOTE=TheNuB;31146480]Is that Niko?[/QUOTE]Yep. [editline]16th July 2011[/editline] I don't get why your post was rated dumb though
[QUOTE=Jetblack357;31153784]Airsoft hurts so much, but its so fun.[/QUOTE] lol airsoft is nothing compared to paintball. [video=youtube;JYDsrRY4dZ8]http://www.youtube.com/watch?v=JYDsrRY4dZ8&feature=related[/video] each paintball weighs around 3 grams and they travel around 300fps.
[QUOTE=SteelReal;31162224]lol airsoft is nothing compared to paintball.[/QUOTE] Neither are bad. Unless you're sitting behind a rock and not doing anything, you usually have too much adrenaline pumping through you to even really feel it. It's like a punch that goes away in a second or two.
[QUOTE=SteelReal;31162224]lol airsoft is nothing compared to paintball. [video=youtube;JYDsrRY4dZ8]http://www.youtube.com/watch?v=JYDsrRY4dZ8&feature=related[/video] each paintball weighs around 3 grams and they travel around 300fps.[/QUOTE] If you get shot in the neck it can be quite dangerous though
It's pretty weak though.
[QUOTE=Trumple;31171104]If you get shot in the neck it can be quite dangerous though[/QUOTE] I accidentally did that to a friend once. He was pissed as fuck. :v:
[QUOTE=Jimmaye;31151492]Its just a ball valve airgun, nothing to powerful. Now if they had used a piston valved one then oh boy, they'd all be on the ground.[/QUOTE] What? Ok a properly constructed piston valve is more efficient than a ball valve, but a quickly opened ball valve is pretty damned effeicent. I bet if you constructed a cannon with the same chamber space and barrel length, running at the same PSI but with a piston valve and did the same thing you couldn't tell the difference. There are SO many factors that make more of a difference. I'd also bet they're deliberately firing at a lower pressure so it doesn't hurt so fucking much. I've built both ball valve and piston valve cannons, although admitedly out of copper and not PVC. I have a smaller bored ball valve cannon that would vaporise a paintball before it left the barrel.
That looks extremely satisfying to use. Even if most of them just bounce off.
[QUOTE=SteelReal;31153474]The reason why none of the paintballs broke was because they weren't traveling at a high enough speed. Or they were just using shitty paintballs. [b]I play all the time and they almost never bounce.[b][/QUOTE] Ok, sure. You're either shooting super hot or you're rich and always buy great paint, because I go out and play every other weekend, have been for two years, and bounces are extremely common.
Lol who takes off their mask to say they shot the guy. Anyone that's ever been airsofting/paintballing knows you never take of your mask, ever.
Sorry, you need to Log In to post a reply to this thread.