IDENTIFY THIS!* - General - Facepunch Forum

what size are these spacers, and how long of bolts do I need to get these on my car? [IMG]http://imageshack.us/a/img89/2105/photo3fu.jpg[/IMG] [IMG]http://imageshack.us/a/img528/3018/photo1cbj.jpg[/IMG] [IMG]http://imageshack.us/a/img9/9239/photo2nlu.jpg[/IMG]

Please no donk. :v: Can't see the pictures.

fixed da pictas mayne

If I had to guess that is a 10mm Wheel Spacer. Gotta get a good measurement tool to find out... if it is.

[QUOTE=DPKiller;38916567]If I had to guess that is a 10mm Wheel Spacer. Gotta get a good measurement tool to find out... if it is.[/QUOTE] 10mm...AKA ONE CENTIMETER. lrn2metric noob. :v:

[QUOTE=Deadman123;38916680]10mm...AKA ONE CENTIMETER. lrn2metric noob. :v:[/QUOTE] The metric system uses mm on constructions and machined things like this

[QUOTE=Deadman123;38916680]10mm...AKA ONE CENTIMETER. lrn2metric noob. :v:[/QUOTE] Easier to say 10mm than 1cm Like my brake assembly uses 18mm sockets. Not 1.8cm sockets

10mm thick, 4x108mm pattern... Or 4x100mm, but I'm unsure why it'd say 108mm and be 100mm pattern.

It's a Wheel Spacer. I'm not sure but I think that the measurements are 10mm Thickness, 100mm [URL="http://en.wiktionary.org/wiki/bolt_circle"]bolt circle[/URL] or BCD (4 hole pattern) and 108mm of total diameter. The 100mm bolt circle is used on Mazdas, Toyotas and Hondas. Take a [URL="http://en.wikipedia.org/wiki/Caliper#Vernier_caliper"]caliper[/URL] and measure it by yourself!

[QUOTE=Dinitrogen;38919941] The 100mm bolt circle is used on Mazdas, Toyotas and Hondas. [/QUOTE] And VW

also bmws (e30) cause thats what its for [editline]21st December 2012[/editline] thanks my dudes

Are you TexasE30? [url]http://www.r3vlimited.com/board/showthread.php?t=132589[/url]

When I took the guess on how big it was I looked at that and thought "5 bucks that is him."

[QUOTE=Dinitrogen;38919941]100mm [URL="http://en.wiktionary.org/wiki/bolt_circle"]bolt circle[/URL] or BCD (4 hole pattern) and 108mm of total diameter.[/QUOTE] I don't think that's possible. That would mean that there was only 4mm between the centre of the bolt holes and the outer-edge of the spacer.