Hi,
some time ago i built a one button gatedialer with wiremod-gates, which i now want to share. (advdup-file)
[url]http://darktemp.dizconnected.de/img/scr01.jpg[/url]
It dials a address stored in a constant value (ascii numbers of the address + '13').
[In the advdup-file it is set to "BUTON1"]
To the right there is a screen displaying how many address-letters are submitted to the gate and how many chevrons are locked.
Also it has a small indicator on the left which tells you if its an incoming(red) or outgoing(green) connection
The connection to the gate is done by a two-way-radio connection, so its quite simple to install it to a gate.
Place a two-way-radio at the gate and connect all ports alphabetically:
A->Close
B->Dial Address
C->Dial Mode
D->Disable Autoclose
Active->A
Chevron->B
Inbound->C
Open->D
And then pair the radios.
[url]http://darktemp.dizconnected.de/img/scr02.jpg[/url]
Hmm, okay, but it wasn't flexible enough to me (regarding the address in the constant value).
I needed something like a memory card to store the address..
so i built a small addon with a memory card to store data on it and a cardreader to read via wire from the card.
The config menu of the memory card:
[url]http://darktemp.dizconnected.de/img/scr03.jpg[/url]
You can set a String, which will be converted to ascii numbers and/or you can set numbers directly.
I provide both, because the Stargate wire input takes the ascii values of the address followed by a '13' to start dialling.
[url]http://darktemp.dizconnected.de/img/scr04.jpg[/url]
To access the data on the card, the card has to be in range of the cardreader and you have to set the 'Address' wire input.
example:
Data on Card: 65,66,67
Value set on 'Address' input:2
'Value' wire output will be 66 (address counting is not starting at 0)
By using the memoryCard i altered the gatedialer to dail the address on the card in range of the cardreader:
[url]http://darktemp.dizconnected.de/img/scr05.jpg[/url]
here are the download-links.
advdup-files of the gatedialer v1(without cardreader) and v2(with cardreader):
[url]http://darktemp.dizconnected.de/gmoddl.php?id=2[/url]
and my memoryCard addon:
[url]http://darktemp.dizconnected.de/gmoddl.php?id=1[/url]
PS. forgive my poor english >.<
Uh, this isn't Lua.
[editline]03:09PM[/editline]
Well, the card is, but I don't understand what it does.
oh, i intended to release my memory card addon, but i explained too much what i used it for.
Basically the cardreader behaves like a wire ram module with the differece that the card holds data and can be carried around or swapped with another card.
I think my head just assploded.
Sorry, you need to Log In to post a reply to this thread.
