Ive finally got my hands on the Samus zerosuit model from Other M.
its almost ready for release, but it needs three things doing to it before that can happen.
. the hair needs sorting out, just abit if possible (i might have someone already doing this but if you want to help out aswell feel free)
and the most important bit
. the model needs a mouth. at the moment there is just a hole, i dont know if its doable but we need someone to give Samus some teeth and the whole inner mouth.
.THEN MAKE IT FACE POSABLE!!! (and im talking proper faceposing if you can, as many things as possible...eyebrow raising etc not just eyes closed, smile blah blah blah...you get my drift)
if you're intrested in helping out and getting this released sooner PM me and ill send you the model to work with :)
[QUOTE=kynie182;29145565]Ive finally got my hands on the Samus zerosuit model from Other M.
its almost ready for release, but it needs three things doing to it before that can happen.
. the hair needs sorting out, just abit if possible (i might have someone already doing this but if you want to help out aswell feel free)
and the most important bit
. the model needs a mouth. at the moment there is just a hole, i dont know if its doable but we need someone to give Samus some teeth and the whole inner mouth.
.THEN MAKE IT FACE POSABLE!!! (and im talking proper faceposing if you can, as many things as possible...eyebrow raising etc not just eyes closed, smile blah blah blah...you get my drift)
if you're intrested in helping out and getting this released sooner PM me and ill send you the model to work with :)[/QUOTE]
How about a nice image of the model?
[IMG]http://i1207.photobucket.com/albums/bb472/alyxcaptor/gm_bunker_sc0001.jpg[/IMG]
might need abit of work on the bones aswell...abit strange when trying to pose.
also perhaps getting the hair to posable might be another thing, at the moment its jiggleboned
anyone intrested in taking this challenge up? if not i'll just release as a "crappy non-beta version" it and try and hope someone takes intrest and finishes it off then :/
this is all new to me, so stop me if this isnt the right course of action!
well maybe it will help if you gave a link to the model?
PM me and ill send you the dropbox address :)
I'm not going to do it :P just saying maybe posting the link will drive somebody to do it. Anyway I'm not really good with ragdolls yet. I still need to work on finger posing and face flexes.
I do believe Korro Bravin already did this, his version apparently had eye, face and finger posing, as well as jiggle bones.
you guys should make the federation troopers from other m
you should have told me to ragdoll the hair XD I thought jiggle boning it would be fine
also so you guys know, I did give this eye posing, it has finger posing, and one body group
Okay here's the deal:
I was helping the OP earlier because I'm trying to learn rigging and whatnot, so he PMed the files for this ragdoll. I also have the one posted in that old thread because It was the only fully intact model that didn't have fucked up UV maps. So to make a long story short, they both have their fair share of problems. The one in the old thread has really awkward joints, A person who wanted to pose it would have to be very precise with every single joint on the entire ragdoll. This one's joint are a little bit less awkward, but there's something very, very wrong with the leg joints. I can't really describe it; just imagine if your ankles were shacked to eachother and there was a rigid bar between the two shackles.
I would suggest holding off on faceposing and whatnot and make fixing the bones top priority.
[QUOTE=Aredbomb;29164610]Okay here's the deal:
I was helping the OP earlier because I'm trying to learn rigging and whatnot, so he PMed the files for this ragdoll. I also have the one posted in that old thread because It was the only fully intact model that didn't have fucked up UV maps. So to make a long story short, they both have their fair share of problems. The one in the old thread has really awkward joints, A person who wanted to pose it would have to be very precise with every single joint on the entire ragdoll. This one's joint are a little bit less awkward, but there's something very, very wrong with the leg joints. I can't really describe it; just imagine if your ankles were shacked to eachother and there was a rigid bar between the two shackles.
I would suggest holding off on faceposing and whatnot and make fixing the bones top priority.[/QUOTE]
I already fixed that
[QUOTE=Aredbomb;29164610]Okay here's the deal:
I was helping the OP earlier because I'm trying to learn rigging and whatnot, so he PMed the files for this ragdoll. I also have the one posted in that old thread because It was the only fully intact model that didn't have fucked up UV maps. So to make a long story short, they both have their fair share of problems. The one in the old thread has really awkward joints, A person who wanted to pose it would have to be very precise with every single joint on the entire ragdoll. This one's joint are a little bit less awkward, but there's something very, very wrong with the leg joints. I can't really describe it; just imagine if your ankles were shacked to eachother and there was a rigid bar between the two shackles.
I would suggest holding off on faceposing and whatnot and make fixing the bones top priority.[/QUOTE]
theres only a slight problem with the joints, i can pose it fine...just needs abit more paitence :p
also thank you for having a look at both an helping with this dude, this will be released into the world at somepoint if people keep chipping and helping out :)
[editline]14th April 2011[/editline]
[QUOTE=plasmid;29163795]you should have told me to ragdoll the hair XD I thought jiggle boning it would be fine
also so you guys know, I did give this eye posing, it has finger posing, and one body group[/QUOTE]
sorry, my fault...i forgot :)
[editline]14th April 2011[/editline]
[QUOTE=Mr.95;29160648]I do believe Korro Bravin already did this, his version apparently had eye, face and finger posing, as well as jiggle bones.[/QUOTE]
sadly it didnt work....which is why i tried to assemble a "team of awesome people" to make a new one that can FINALL be released :p
all i now need is a wheelchair, bald head and private jet hidden under a swimming pool
[QUOTE=Mr.95;29160648]I do believe Korro Bravin already did this, his version apparently had eye, face and finger posing, as well as jiggle bones.[/QUOTE]
It didn't have face or eye posing. Only one hand had finger posing and the arms and legs couldn't bend or move very much.
I'm glad to see someone finally getting to work on this.
it only needs face posing, eveything else was fixed
[QUOTE=plasmid;29174577]it only needs face posing, eveything else was fixed[/QUOTE]
he's right you know, someone needs to face pose this and we can release it...if anyone can/wants to do it just PM me :)
Still need Anthony Higgs hand fixed.
here is the DL link for the current model if anyone wants to work on it and get it ready for everyone to enjoy.
a big thanks to Plasmid who got it to this stage, if you do finish the model, jump the gun and decide not to let myself or anyone else know, please just give him credit he deserves!
[url]http://dl.dropbox.com/u/11830984/garrys%20mod/samus.zip[/url]
personally im just after faceposing and the hair having a quick "touch up" ....if you want to ragdoll the ponytail i wouldnt complain either but thats not really that much of a problem to me.
beautiful
[QUOTE=Mr.95;29160648]I do believe Korro Bravin already did this, his version apparently had eye, face and finger posing, as well as jiggle bones.[/QUOTE]
OHOHOH YOU MAKE ME LAUGH!
Nah, it only had broken finger posing sadly... and the same hair bug, try creating new smoothing groups for the hair to fix it.
[QUOTE=Korro Bravin;29196401]OHOHOH YOU MAKE ME LAUGH!
Nah, it only had broken finger posing sadly... and the same hair bug, try creating new smoothing groups for the hair to fix it.[/QUOTE]
well i know you said you wernt working on your modle anymore, but you are always welcome to work on this one...we need some talented people to finish off this project :p
well ive tried many people for help finishing this model off...sadly all are busy. i really dont wish to "release" plasmid's awesome work without it being finished fully but its looking like i have no choice unless someone comes through for me this weekend :/
Sorry, you need to Log In to post a reply to this thread.
