[QUOTE=Eraserhead23;37189177]-Posts the same question 3 times in a row on one day
-Then starts complaining how there are new issues every day as if you have the right to a service level or something
-Yo_D tells you this program is to make life easier and you need a certain level of resourcefulness
-Responds in a defensive manner
-Claims people attack him
This is the last post i'm making about this because it has nothing to do anything with TF2Idle. I really hope you understand that by being irritating you won't get help. Good luck.[/QUOTE]
Thanks for the goodluck, maybe people shouldn't attack me for asking help :)
[QUOTE=vmartelle;37190595]Thanks for the goodluck, maybe people shouldn't attack me for asking help :)[/QUOTE]
His post was ridiculing you, not supporting you.
[QUOTE=Mr. Smartass;37190735]His post was ridiculing you, not supporting you.[/QUOTE]
nice nickname you got there
I got everything back up and working with tf2idle, but suddenly, when I started opening up sandboxie, I would instantly get blue screened. I ran chkdsk and it seemed to fix the problems for a day. Now when ever I run tf2idle for a few minutes, I get blue screened. I can't seem to fix it.
Any ideas?
[QUOTE=vmartelle;37195086]I got everything back up and working with tf2idle, but suddenly, when I started opening up sandboxie, I would instantly get blue screened. I ran chkdsk and it seemed to fix the problems for a day. Now when ever I run tf2idle for a few minutes, I get blue screened. I can't seem to fix it.
Any ideas?[/QUOTE]
New hard drive, format the hard drive ?
[QUOTE=ric20007;37195349]New hard drive, format the hard drive ?[/QUOTE]
Inspected the hard drive and all the other drivers in general, most of them are up to date. I did notice my graphics card did need an update (although it was updated recently anyway), so I'm going to play around with that for right now. I'll fool around a bit more with the drivers and such and see what happens.
[QUOTE=vmartelle;37195416]Inspected the hard drive and all the other drivers in general, most of them are up to date. I did notice my graphics card did need an update (although it was updated recently anyway), so I'm going to play around with that for right now. I'll fool around a bit more with the drivers and such and see what happens.[/QUOTE]
I was not talking about the drivers, I was talking about the physical "disk" the hard drive (HDD or SSD).
It may need some defragramentation, it may have some bad sectors or in need of a nice and clean format.
[QUOTE=Boben;37162413]Not sure about 27xxx, better to use random.
[url]http://i.imgur.com/yu7co.png[/url][/QUOTE]
How much memory installed in your system?
[QUOTE=kowz;37165754]any one having the problem, "could not download schema", when trying to add accounts to the drop log view?[/QUOTE]
Same thing here, the item server appears to be fine.
Hey Mouse. Great program you have here. I have been using it without much of an issue for months now. I found an interesting quirk last night, though.
[IMG]http://i.imgur.com/gbLNc.png[/IMG]
It's no big deal, but the Red-Tape Recorder is dropping into my inventory log as a Tool. I am assuming this is an issue with the schema, and it doesn't interfere with any functionality, but I thought I might share this.
[B]EDIT[/B]: I would also like to add that the drop-reset did not seem to occur for me until 5:00pm EST today, which I attribute to the update being released last night.
[QUOTE=bestbwise;37275430]Hey Mouse. Great program you have here. I have been using it without much of an issue for months now. I found an interesting quirk last night, though.
[IMG]http://i.imgur.com/gbLNc.png[/IMG]
It's no big deal, but the Red-Tape Recorder is dropping into my inventory log as a Tool. I am assuming this is an issue with the schema, and it doesn't interfere with any functionality, but I thought I might share this..[/QUOTE]
Ah that would be because the Red-Tape Recorder is not classified as a weapon but as a build tool. I'll figure out a workaround when I update (eventually)
moussekateer, you still working on cycling through accounts as an upcoming feature?
This is what you get when TF2 is F2P.
Anyway, I only have one account so can I use this to idle with it or do you need more?
Sorry if it sounds stupid.
You can use this but it's not really needed for that. You need to buy the program Sandboxie so i'm not sure why you would do that for just 1 extra idle account. This program is more for handling lots of accounts. But, that being said you can still use it...
Question: Do I need the full version of Sandboxie to idle on multiple accounts?
It won't let me run in multiple sandboxes on the free version.
[QUOTE=Splash Attack;37281141]Question: Do I need the full version of Sandboxie to idle on multiple accounts?
It won't let me run in multiple sandboxes on the free version.[/QUOTE]
yes
It worked and now it doesn't T_T
[IMG]http://i.imgur.com/aV1si.jpg[/IMG]
[QUOTE=farkz;37285005]It worked and now it doesn't T_T
[IMG]http://i.imgur.com/aV1si.jpg[/IMG][/QUOTE]
add:[QUOTE] -port number[/QUOTE] to your launch options ex: -port 23
[QUOTE=blinkerz;37279545]moussekateer, you still working on cycling through accounts as an upcoming feature?[/QUOTE]
I've got the details all worked out, the problem is the implementation. I'd need to refactor a LOT of code and sadly I don't have as much free time these days. If I had written TF2Idle from the start with all these features in mind the code would have looked completely different, and this frustrates me.
Would be awesome if other people would help you developing this.
It's an awesome program.
Is anyone having an issue now when trying to join any server?
I get stuck at "Retrieving Server Info" and it never gets past that when using Sandboxie. It only just started happening after the MvM update. :/
[QUOTE=Ideal-Hosting;37288877]Would be awesome if other people would help you developing this.
It's an awesome program.[/QUOTE]
Indeed it would. I fear though that other people will find it hard to read my spaghetti code.
Is it me, or the last update doesn't let tf2 start with console like interface?
Idled for an hour on 4 accounts and found a hat :D
If anyone ever needs help setting stuff up, feel free to add me. You'll need a mic though.
nevermind, figured it out
Do I need a emulator to run this and idle? Or can I just run this from my Windows 7 and log in 2 steam accounts?
[QUOTE=Thefalcon;37305559]Do I need a emulator to run this and idle? Or can I just run this from my Windows 7 and log in 2 steam accounts?[/QUOTE]
You need a PSP with custom firmware.
Nah jk, you just need a full version of sandboxie, this, and multiple steams.
How do you guys solve the problem when all your accounts want to validate TF2 cache each time you launch after an update? I manually defrag em all and that fixes it, but that's a pain seeing how there's a damn update every week now...
Perhaps TF2idle could have a thing that sent a command to defrag any steam open via tf2idle?
[QUOTE=Yo_D;37308420]You need a PSP with custom firmware.
Nah jk, you just need a full version of sandboxie, this, and multiple steams.
How do you guys solve the problem when all your accounts want to validate TF2 cache each time you launch after an update? I manually defrag em all and that fixes it, but that's a pain seeing how there's a damn update every week now...
Perhaps TF2idle could have a thing that sent a command to defrag any steam open via tf2idle?[/QUOTE]
update gfcs that is
[QUOTE=radek;37310575]update gfcs that is[/QUOTE]
I use the same GFC's that I use on my main account and it works fine on that one...
In the off chance that Iviv reads this and wants to add it to his guide, you can create system links painlessly by creating a .bat file containing the following, then copying it to each idle Steam directory and running it:
[CODE]cd /d %~dp0
mklink /D steamapps "C:\Program Files (x86)\Steam\Steamapps"
mklink /D Public "C:\Program Files (x86)\Steam\Public"
mklink /D Graphics "C:\Program Files (x86)\Steam\Graphics"
mklink /D bin "C:\Program Files (x86)\Steam\bin"
mklink /D resource "C:\Program Files (x86)\Steam\resource"[/CODE]
Make sure to delete or directly not copy any of those folders before running it.
This way, you don't have to manually go to every Steam copy and type out the full mklink command, as it proved a chore for me.
Sorry, you need to Log In to post a reply to this thread.
