• The Airsofting+Gas mask Thread
    254 replies, posted
It doesn't have ballistic lenses
Okay thanks!
they sell ballistic outserts for the m17 and copies though
Well after Royal Mail giving me the run around I've finally gotten my gas mask. Expect pics tomorro.
I've made airsofting with a non-customized gp5 mask a possibility! :dance: Behold..! [IMG]http://i853.photobucket.com/albums/ab91/jomt1234/IMAG0282.jpg[/IMG]
Wow, that's not too bad actually. Good luck not fogging up though.
[QUOTE=notrabies;33771086]Wow, that's not too bad actually. Good luck not fogging up though.[/QUOTE] Yeah, that's the only problem :v:
Double the goggles! Double the fogging! Half the visibility! GENIUS
[QUOTE=catbarf;33771335]Double the goggles! Double the fogging! Half the visibility! GENIUS[/QUOTE] Except the goggles are anti-fog treated, and how would they fog? You don't wear them directly on your face.
[QUOTE=BBOOBBYY!;32213870]Second one.[/QUOTE] My friend almost lost his eye when his cheapo Israeli mask's lens was shot, it shattered but not completely thankfully, plus they're hot and foggy as balls.
[QUOTE=jomt1234;33771405]Except the goggles are anti-fog treated, and how would they fog? You don't wear them directly on your face.[/QUOTE] You don't wear rifle scopes on your face either, yet they'll fog if the seals are broken and air gets inside. It's a matter of heat and ambient moisture.
Made this steel mesh lens for my gas mask, also took the crap out of the filter. [IMG]https://lh5.googleusercontent.com/-HYHI6mjhxe8/Tu99XcnI90I/AAAAAAAAAHo/7SXNekNVeN0/s800/IMAG0020.JPG[/IMG]
[QUOTE=Dweller;33797844]Made this steel mesh lens for my gas mask, also took the crap out of the filter.[/QUOTE] What gasmask is that?
[QUOTE=GREN EYGS N HAM;33797955]What gasmask is that?[/QUOTE] Its non military, Kemira Sari Full Face Mask
[QUOTE=Dweller;33797844]Made this steel mesh lens for my gas mask, also took the crap out of the filter. [IMG]https://lh5.googleusercontent.com/-HYHI6mjhxe8/Tu99XcnI90I/AAAAAAAAAHo/7SXNekNVeN0/s800/IMAG0020.JPG[/IMG][/QUOTE] Why does this man not have like 30 medals
well some guy cut ess spare goggle lenses and attached it to his gp-7 [img]http://img546.imageshack.us/img546/9495/essprofilenvgclearlens.jpg[/img] [img]http://img696.imageshack.us/img696/3092/61899066.jpg[/img] right is the original lens, left are the polycarb ones [img]http://img694.imageshack.us/img694/9991/67931190.jpg[/img] [img]http://img820.imageshack.us/img820/3995/39318987.jpg[/img] quite possibel
thats genisu
I've been looking for polycarb that would be suitable in goggles, didn't think to use spare lenses as a basis.
Got the civillian version because of the curved lenses, do you have a link on that/more info?
get small rubber gloves cut the end of the sleeves so you get rubber rings get polycarb spare lenses cut it to the shape of your gas mask lens stretch rubber rings over the lenses and fit them over your gas mask ????? PROFIT!!!
[QUOTE=Kill001;33800401]well some guy cut ess spare goggle lenses and attached it to his gp-7 [img]http://img546.imageshack.us/img546/9495/essprofilenvgclearlens.jpg[/img] [img]http://img696.imageshack.us/img696/3092/61899066.jpg[/img] right is the original lens, left are the polycarb ones [img]http://img694.imageshack.us/img694/9991/67931190.jpg[/img] [img]http://img820.imageshack.us/img820/3995/39318987.jpg[/img] quite possibel[/QUOTE] hmm black lenses would look better
are M40 outserts strong enough to use for airsoft, or do i need to modify them in any way? they look pretty solid plastic to me, but i'm not sure.
[QUOTE=FloaterTWO;33829471]are M40 outserts strong enough to use for airsoft, or do i need to modify them in any way? they look pretty solid plastic to me, but i'm not sure.[/QUOTE] test shotted mine point blank ended up buying a new set of lenses 5 minutes later
so i take it that's a no how would i get ballistic ones, or would i have to make some?
[QUOTE=FloaterTWO;33837019]so i take it that's a no how would i get ballistic ones, or would i have to make some?[/QUOTE] How to make: [QUOTE=Kill001;33802655]get small rubber gloves cut the end of the sleeves so you get rubber rings get polycarb spare lenses cut it to the shape of your gas mask lens stretch rubber rings over the lenses and fit them over your gas mask ????? PROFIT!!![/QUOTE] Here's outserts for sale: [url]http://www.armygasmasks.com/Laser-Ballistic-Outserts-for-M40-Series-Gas-Masks-p/aaagas-240.htm[/url] Overpriced as fuck tho
'this page cannot be found' I've got some spare sun/wind/dust goggle lenses around but nothing to cut them with. I don't really want to attack them with a hacksaw because i'm a klutz and they'd probably be really shit
Floater, get some of this stuff [url]http://www.safetyglassesusa.com/fac8x.html[/url] You'll have plenty left over if you fuck up once or twice
I would, but shipping to the UK is like, 30 dollars. I should be fine with my S/W/D goggle spare lenses providing i have a decent method of cutting the plastic (laser cutter or CAD machine or some shit), but i have none of those.
[QUOTE=FloaterTWO;33840668]'this page cannot be found' I've got some spare sun/wind/dust goggle lenses around but nothing to cut them with. I don't really want to attack them with a hacksaw because i'm a klutz and they'd probably be really shit[/QUOTE] What I see: [img]http://img23.imageshack.us/img23/7704/fasfdsf.png[/img]
nunu bot
Sorry, you need to Log In to post a reply to this thread.