• The Official Questions Thread V. GUYS WHERE DO I BUY MAGPUL RAIL COVERS FOR MY BETA SPOOTZNAAZ??
    1,428 replies, posted
My friend Dylan is looking for a full metal Luger, I checked online with him a couple of minutes ago, star rainbow company had one, but it looks like its discontinued. He appreciates you guys helping a lurker.
[QUOTE=flamehead5;34098740]My friend Dylan is looking for a full metal Luger, I checked online with him a couple of minutes ago, star rainbow company had one, but it looks like its discontinued. He appreciates you guys helping a lurker.[/QUOTE] You should mail the sites and see if they ship internationally, else you could maybe send me the money so I buy it and send it (gotto talk to dad about that) Both full metal [URL="http://www.strikerairsoft.se/airsoftvapen/pistol/kwa/we-luger-p08-gbb.html"]WE Luger P08[/URL], Out of stock, 1495 kr (US$206) [URL="http://www.garderoben.se/asg-luger-p08-p-1209-c-154.aspx"]ASG Luger P08[/URL], In stock, 1695 kr (US$234)
Currently, all airsoft lugers are just unbearably awful, don't get one. The best you can hope for is a P38, and if you get one it will not be full metal, and you'll have to run it on HFC134a instead of green gas/propane.
Plus you're in canadaland so you'll need a canadian deal so it won't be seized at the border
[QUOTE=felix the cat;34091444][url]http://www.airsoftgi.com/product_info.php?cPath=27_44_193&products_id=405[/url] I think they're taking over the US market from KSC completely.[/QUOTE] proprietary bbs, only work with kwa
I want to make a home-made airsoft mortar. I was going to use compressed air or something, anyone tried mortars?
timebomb
which one is better? [url]http://www.airsoftgi.com/product_info.php?products_id=6727[/url] [url]http://www.airsoftgi.com/product_info.php?products_id=5742[/url]
Same thing.
Go cyma because 2 bux cheaper
Best rear-wire set for a V2?
[QUOTE=Aznsniper911;34097256]Ender how did you remove your flash hider on your WE G39c?[/QUOTE] Remove outer barrel, propane torch to soften the loctite, barrel clamped down in a vise, then used a large screw driver between the flash hider to torque it off. Even then that may not do it. My friend had one and his was so fucked by the time it got to me to try this method. Even I couldn't get it off.
He says a Mauser is ok too, but he left before I asked whether he was talking about the rifle or the early ninteenth century pistol. Knowing him, its probably the pistol. Regarding the Luger, I think he is just using it for reenactment stuff, he just wants a loud noise (I think...)
HFC and Tercel make mausers and m712s respectively
[QUOTE=xXEnder007Xx;34101470]Remove outer barrel, propane torch to soften the loctite, barrel clamped down in a vise, then used a large screw driver between the flash hider to torque it off. Even then that may not do it. My friend had one and his was so fucked by the time it got to me to try this method. Even I couldn't get it off.[/QUOTE] Thanks, I can see why facepuke just painted it black instead of taking it off.
[QUOTE=Dark Descent;34101666]HFC and Tercel make mausers and m712s respectively[/QUOTE] I can't find any Canadian links so far, but it looks good.
tacticalhijack wants to sell me a HFC M9 for 70 bucks. one mag + gun + kjw grips because the hfc ones have a spiderweb on them and spiderwebs suck
[QUOTE=milkandcooki;34104186]tacticalhijack wants to sell me a HFC M9 for 70 bucks. one mag + gun + kjw grips because the hfc ones have a spiderweb on them and spiderwebs suck[/QUOTE] And they're also hella plasticky and feel like shit. Also, the KJW one's are rubberized. Edit: Also, I told you I lurk like a motherf*****
[QUOTE=milkandcooki;34104186]tacticalhijack wants to sell me a HFC M9 for 70 bucks. one mag + gun + kjw grips because the hfc ones have a spiderweb on them and spiderwebs suck[/QUOTE] go for it but for the love of god do not fuck with the trigger spring in the right side of the grip. If anything happens to that then your whole gun will be fucked, just like what happened to mine. I constantly had to break it down in the middle of a game to put the spring back in place.
How do I make my orange MAG mags look like bakelite? And should I buy another box of plum mags or more orange.
Sand paper+ wood stain to make them more bakelite-esque. Personally I'd get plum for varieties sake.
[QUOTE=Dark Descent;34104848]How do I make my orange MAG mags look like bakelite? And should I buy another box of plum mags or more orange.[/QUOTE] My plum MAG mags look amazing. Get them.
[QUOTE=Year_of_Lurking;34104899]Sand paper+ wood stain to make them more bakelite-esque. Personally I'd get plum for varieties sake.[/QUOTE] use a red varnish after sanding the fuck out of it, i heard MinWax Red Oak works pretty well for it
Would that look good on the wood too? I shitted mine up p. good and I wanna make it look good again.
i probably wouldn't use one as dark as red oak, but you can find a lighter varnish and it'd make your wood look sexy again
I have G&P AK mags. Don't feed that well unless my mag is like completely full. Normal for midcaps?
[QUOTE=milkandcooki;34106406]I have G&P AK mags. Don't feed that well unless my mag is like completely full. Normal for midcaps?[/QUOTE] I once bought a brand new 120round P-Mag and i did not put any oil in it before using it, so it seized up on me mid game and only fed 25 bb's before it could no longer feed into the gun.
[QUOTE=milkandcooki;34106406]I have G&P AK mags. Don't feed that well unless my mag is like completely full. Normal for midcaps?[/QUOTE] They have a slight "break in" period. It's normal for midcaps. Also, put a [B]tiny[/B] bit of lube in the mag
I don't have any lube :C
[QUOTE=milkandcooki;34107018]I don't have any lube :C[/QUOTE] Well in that case, load them up completely and leave them overnight. Then in the morning unload them. That should break in the spring p. decently.
Sorry, you need to Log In to post a reply to this thread.