• The Official Questions Thread V. GUYS WHERE DO I BUY MAGPUL RAIL COVERS FOR MY BETA SPOOTZNAAZ??
    1,428 replies, posted
ANSI Z.87 is good for airsoft, yes?
yus you shouldn't wear anything not z87.1 rated or above
two questions [b]GUN WEAPON[/b] AKS-74U. What brand? [b]GEAR CLOTHES[/b] ALICE loadout or molle + harness loadout?
cyma or dboys for the gun
So good airseal can raise fps with just a nozzle and bucking? [editline]28th January 2012[/editline] [QUOTE=milkandcooki;34440008]two questions [b]GUN WEAPON[/b] AKS-74U. What brand? [b]GEAR CLOTHES[/b] ALICE loadout or molle + harness loadout?[/QUOTE] Dboys and my alice worked great today, just needed to tighten it more
[QUOTE=milkandcooki;34440008]two questions [b]GUN WEAPON[/b] AKS-74U. What brand? [b]GEAR CLOTHES[/b] ALICE loadout or molle + harness loadout?[/QUOTE] VFC. Alice is cheaper and you can find it at most surplus stores. Battlebelts are more comfortable
How many dolla do the VFC, CYMA, and DBOYEEZ AKs cost?
VFCs are about $450, clones are about $150-$200.
shit i can't go VFC then i'll go for dboys or cyma [editline]28th January 2012[/editline] [url]http://www.evike.com/product_info.php?cPath=21_672_719&products_id=30307[/url] okay this is gayvike's re-re-re-rebrand of cyma good? y/n
[QUOTE=milkandcooki;34441639]shit i can't go VFC then i'll go for dboys or cyma [editline]28th January 2012[/editline] [url]http://www.evike.com/product_info.php?cPath=21_672_719&products_id=30307[/url] okay this is gayvike's re-re-re-rebrand of cyma good? y/n[/QUOTE] I vote no. I'm pretty sure that's the cyma cm035a. I had mine snap in half, and someone else on here had the same thing happen. I'd try to get the cm045a, but I could only find it in stock on asian sites.
its on hitguns
[QUOTE=Dark Descent;34439299]Jat pls help[/QUOTE] Sorry I was very tired from yesterday's game and forgot a lot of things. Soft snow and snowdrifts up to 4 feet deep is death to your thighs. IF you keep it below 1 joule (about 330 fps) there's a barrel for you. It's called the Tanio Koba Twist (by m night shyamalan). It has a very odd rifling that starts to stop working up around 370 fps is where it starts to fling bbs everywhere, but it's pretty much the most accurate barrel out there. Some people have told me the rifling starts to work again above 500fps but lets ignore that. Although for optimal accuracy it works best at around 320-340 fps Using heavier bbs to slow down the fps doesnt work either. We're talking about joules, not fps. So dont think you've found a workaround. :3
Ok so I have 2 cans of stuff labeled as silicone oil. One says "ICS GEAR SILICONE OIL" and the other says "G&G SILICONE OIL." The G&G stuff is significantly lighter and is clear in color. The ICS stuff is kinda thick and is yellowish in color. I also have these 2 little things that say "CA Cylinder Grease." What would I use these for on a GBB pistol?
also upgrading a barrel or hopup in a clone isnt a problem because you're not opening the gearbox and breaking all the hard work the kid in china put into it. [editline]29th January 2012[/editline] [QUOTE=cardfan212;34447522]Ok so I have 2 cans of stuff labeled as silicone oil. One says "ICS GEAR SILICONE OIL" and the other says "G&G SILICONE OIL." The G&G stuff is significantly lighter and is clear in color. The ICS stuff is kinda thick and is yellowish in color. I also have these 2 little things that say "CA Cylinder Grease." What would I use these for on a GBB pistol?[/QUOTE] CHOCOLATE MILK. Sounds like you should use the G&G silicone oil. silicone spray should be clear. [editline]29th January 2012[/editline] also dont use that CA cylinder grease on anything. throw it away. Go to a hardware store and get food grade silicone.
[QUOTE=Jat Goodwin;34447466]Sorry I was very tired from yesterday's game and forgot a lot of things. Soft snow and snowdrifts up to 4 feet deep is death to your thighs. IF you keep it below 1 joule (about 330 fps) there's a barrel for you. It's called the Tanio Koba Twist (by m night shyamalan). It has a very odd rifling that starts to stop working up around 370 fps is where it starts to fling bbs everywhere, but it's pretty much the most accurate barrel out there. Some people have told me the rifling starts to work again above 500fps but lets ignore that. Although for optimal accuracy it works best at around 320-340 fps Using heavier bbs to slow down the fps doesnt work either. We're talking about joules, not fps. So dont think you've found a workaround. :3[/QUOTE] I keep wanting to buy a twist barrel, but I don't know what I'd put it in. You get supreme accuracy, but at such a low fps you'll be at a major disadvantage on the field, regardless of how excellent your hop is. If only they worked up to 370-380, It would go right in the SVD.
[QUOTE=Jat Goodwin;34447525]also upgrading a barrel or hopup in a clone isnt a problem because you're not opening the gearbox and breaking all the hard work the kid in china put into it. [editline]29th January 2012[/editline] CHOCOLATE MILK. Sounds like you should use the G&G silicone oil. silicone spray should be clear. [editline]29th January 2012[/editline] also dont use that CA cylinder grease on anything. throw it away. Go to a hardware store and get food grade silicone.[/QUOTE] What's wrong with the CA cylinder grease? I used in in my AEGs, they work pretty good.
[IMG]http://i.imgur.com/95w9p.jpg[/IMG] Gearbox approved?
[QUOTE=Dark Descent;34448281][IMG]http://i.imgur.com/95w9p.jpg[/IMG] Gearbox approved?[/QUOTE] looks like beer can you should drink it
White lithium is nice but it can dry out. Its not bad but there are better things. I wont say not to use those but i wont give them my stamp of approval. [editline]29th January 2012[/editline] oh god why does it say im a mac fag! Im using dolphin browser on ice cream sandwich!
The new CQB place is pretty cramped, pistols/shotties/machine pistols only unless you don't "run-n-gun" with an AEG. I'm thinking a TM MP7 might be in order, should I try for one? I've seen people trying to ditch theirs for as low as $50 because of how little they can be used outside of the (not elitist and thus uncool) CQB places.
[QUOTE=Jenkem;34452645]The new CQB place is pretty cramped, pistols/shotties/machine pistols only unless you don't "run-n-gun" with an AEG. I'm thinking a TM MP7 might be in order, should I try for one? I've seen people trying to ditch theirs for as low as $50 because of how little they can be used outside of the (not elitist and thus uncool) CQB places.[/QUOTE] get it used if you see one cheap. Just keep in mind it's gonna be a bit hard to get replacement and upgrade parts outside of japanese retailers.
[QUOTE=iFail;34452714]get it used if you see one cheap. Just keep in mind it's gonna be a bit hard to get replacement and upgrade parts outside of japanese retailers.[/QUOTE] Actually, nope. I found a site that carries every single part for it. I'll find it again in a bit. Oh it is also time for the inevitable "You're Playing CQB Get A Gas Shotgun" plug. [editline]29th January 2012[/editline] [url]http://www.airsoftgunrepair.com/mp7airsoftgunreplacementparts.html[/url] [editline]29th January 2012[/editline] And its in Wisconsin, so you should get quick shipping.
[QUOTE=notrabies;34452822]Actually, nope. I found a site that carries every single part for it. I'll find it again in a bit. Oh it is also time for the inevitable "You're Playing CQB Get A Gas Shotgun" plug. [editline]29th January 2012[/editline] [url]http://www.airsoftgunrepair.com/mp7airsoftgunreplacementparts.html[/url] [editline]29th January 2012[/editline] And its in Wisconsin, so you should get quick shipping.[/QUOTE] Holy FUCK they stock scorp standard mags for 10 bucks a pop? Seems pretty legit, anybody used em?
[QUOTE=TheHypnotoad;34455801]Holy FUCK they stock scorp standard mags for 10 bucks a pop? Seems pretty legit, anybody used em?[/QUOTE] They're not very well known, but they're a small company in the US so you can sue them or beat them up if they give you trouble. Small shops normally have the best service anyways.
Hey guys, what was the website with $30 desert locusts?
they took them off their site :(
Why does my cylinder have one port in it? [editline]29th January 2012[/editline] Also, [url]http://www.Airsoftatlanta.com/PDI_VSR_AEG_Hopup_W_Bucking_p/64003.htm[/url] Y/N
[QUOTE=Dark Descent;34456642]Why does my cylinder have one port in it?[/quote] Because your barrel is not long enough to need compression from a full cylinder. [quote] Also, [url]http://www.Airsoftatlanta.com/PDI_VSR_AEG_Hopup_W_Bucking_p/64003.htm[/url] Y/N[/QUOTE] Naw. Just go for systema or guarder
because your cylinder only needs one port. I looked on that terrible website and personally, based on what they have in stock, i would get a madbull shark bucking. The black is hard, the red is softer. [editline]29th January 2012[/editline] Also even though brometheus is usually a solid name, they make terrible buckings.
[url]http://www.Airsoftatlanta.com/Guarder_Improved_Hopup_Airsoft_Bucking_Black_p/34458.htm[/url] ??? I gott get it from airsoft atlanta or amazon prime so I have it by the end of the week
Sorry, you need to Log In to post a reply to this thread.