Post Your Guns V2 - General

Here we go... Cyber Gun M4a1 CQBR (Installed outer barrel expander, tightbore Systema full-size m4 barrel inside) Cyber Gun M203 nade launcher WE M1911 [img]http://img816.imageshack.us/img816/2476/wolologunz.jpg[/img] Accessories: King Arms tactical 1-3x scope (Leupold CQ-T replica) King Arms ACOG-style RedDot (Cross reticle) LED flashlight from nearby store. Lol.

They're just Cybergun bought trades I thought, there should be a [i]real[/i] company who made the gun. Like VFC, KJW, KWA, G&G, ARES etc. Cybergun doesn't really make any of their guns, maybe a handful of cheap ones but normally real companies just buy their trademarks.

Doesn't say anywhere. I don't care anyways, the M4 is two years old and I've never had any problems with it, just the wobbling on the mag and the handguard, but I got used to it.

Mag wobble is a good thing to me as long as the mags feed. When they wobble like that it says to me that the mag-well is large enough to accept all kinds of mags (Not all brands are the same size) and if they happen to be too small I just wrap electrical tape around it once or twice to make it snug (Solution to the mag wobble if you really hate it)

The handguard shouldn't wobble imho especially when it's a M4 with rails

It doesn't really wobble much anymore because of the RIS Nade launcher mount I put between the handguard and upper reciever, you can see it on the photo. It makes it much stiffier, like one piece,

Could always mount your sights a little further up to do the same thing.

Would look a bit odd. I'm happy with it as it is right now. Also. [img]http://img823.imageshack.us/img823/9859/hattersgonahate.jpg[/img] Funny how it actually works.

[IMG]http://i54.tinypic.com/nl6g7n.jpg[/IMG] The pistol is a G&G Xtreme .45 CO2 Gas pistol and the sniper is a UTG M324S. Sorry about the sock and teddy bear, haha.

[QUOTE=xxncxx;28409198][img_thumb]http://i54.tinypic.com/nl6g7n.jpg[/img_thumb] The pistol is a G&G Xtreme .45 CO2 Gas pistol and the sniper is a UTG M324S.[/QUOTE] Who are the sock and teddy bear made by?

[QUOTE=xxncxx;28409198][img_thumb]http://i54.tinypic.com/nl6g7n.jpg[/img_thumb] The pistol is a G&G Xtreme .45 CO2 Gas pistol and the sniper is a UTG M324S.[/QUOTE] [img]http://i.cubeupload.com/i2zGk4.jpg[/img] Thinking of picking up one of these in OD green. Does anyone have experience with them?

[QUOTE=smallfry;28410374][img_thumb]http://i.cubeupload.com/i2zGk4.jpg[/img_thumb] Thinking of picking up one of these in OD green. Does anyone have experience with them?[/QUOTE] I usually pistol whip mine when it's being a bitch. Keeps them in line.

[QUOTE=smallfry;28410374][img_thumb]http://i.cubeupload.com/i2zGk4.jpg[/img_thumb] Thinking of picking up one of these in OD green. Does anyone have experience with them?[/QUOTE] Oh smallfry, you so crazy.

Time to fuck shit up in CQB Behold [img]http://img810.imageshack.us/img810/9710/dsc0074q.jpg[/img]

Is that leather?

That is fucking sex

Let me get this straight. You like tactical shotguns and Vz.58s, but everything else is sinful?

Uglyass tri-rail isn't for me but I love the heatshield.

[QUOTE=xXEnder007Xx;28411569]Time to fuck shit up in CQB Behold [img_thumb]http://img810.imageshack.us/img810/9710/dsc0074q.jpg[/img_thumb][/QUOTE] Make a reload video, i'm incredibly interested.

Have to admit, the heat shield makes a great addition to any tri shot shotgun on the market. Gives it a little extra heft too. Although it won't work or M1014 shotguns unless you cut down part of the pump that sits near the barrel.

[QUOTE=xXEnder007Xx;28413220]Have to admit, the heat shield makes a great addition to any tri shot shotgun on the market. Gives it a little extra heft too. Although it won't work or M1014 shotguns unless you cut down part of the pump that sits near the barrel.[/QUOTE] tell me EXACTLY how to do what you did.

[QUOTE=xXEnder007Xx;28411569]Time to fuck shit up in CQB Behold [img_thumb]http://img810.imageshack.us/img810/9710/dsc0074q.jpg[/img_thumb][/QUOTE] Holy shit that rail looks like it could work as a TRI-AD mount for a C7. Would it be able to fit on an AR barrel?

Ender, buy another tri-shot, upgrade it like that, sell it on ebay. Make lods emone

[QUOTE=DarkSamus;28413264]tell me EXACTLY how to do what you did.[/QUOTE] Step 1: Buy Heatshield [URL]http://www.cheaperthandirt.com/SHT007-1.html[/URL] Step 2: Push head shield down onto the barrel. If it won't snap on take some pliers and widen the sheet metal clamps of the heat guard. (If it's an M3 model, then both of the sights will prevent the heat guard from being seated down fully, such as mine. It still hold firm, won't come off). Step 3: If you are able to push the heat guard all the way down, use the supplied screws to tighten the heat guard to the front of the barrel. That's all you have to do. [QUOTE=Taepodong-2;28413286]Holy shit that rail looks like it could work as a TRI-AD mount for a C7. Would it be able to fit on an AR barrel?[/QUOTE] No, the shell tube diameter is much larger than a AR barrel. But keep looking around for universal barrel mounted rails.

What brand shotgun is that? If the total is under $150, I'll consider it..... and add more shit to my existing loadout :frog:

[QUOTE=Kill001;28413776]What brand shotgun is that? If the total is under $150, I'll consider it..... and add more shit to my existing loadout :frog:[/QUOTE] Buy enough shotgun shells to be able to slip one into every exposed loop of your MOLLE vest.

[QUOTE=CodeMonkey3;28413800]Buy enough shotgun shells to be able to slip one into every exposed loop of your MOLLE vest.[/QUOTE] I like that idea. I have an empty Interceptor I can use.

Unlimited Buckshot Works?

For anyone interested in the total cost of my setup $55 DE M3 Shotgun $24 for 12 UTG shotgun shells [URL]http://www.airsoftpost.com/product_info.php?cPath=23_569&products_id=29205[/URL] $30 Heat Shield [URL]http://www.cheaperthandirt.com/SHT007-1.html[/URL] $25 Tri Rail [URL]http://www.cheaperthandirt.com/SCP837-1.html[/URL] $30 for 2x shotgun cards [URL]http://www.skdtac.com/Esstac_Shotgun_Card_p/ess.106.htm[/URL] $3 Velcro for shotgun Total (without Tac light, tax, and shipping) = $167

[QUOTE=xXEnder007Xx;28413749]Step 1: Buy Heatshield [URL]http://www.cheaperthandirt.com/SHT007-1.html[/URL] Step 2: Push head shield down onto the barrel. If it won't snap on take some pliers and widen the sheet metal clamps of the heat guard. (If it's an M3 model, then both of the sights will prevent the heat guard from being seated down fully, such as mine. It still hold firm, won't come off). Step 3: If you are able to push the heat guard all the way down, use the supplied screws to tighten the heat guard to the front of the barrel. That's all you have to do. No, the shell tube diameter is much larger than a AR barrel. But keep looking around for universal barrel mounted rails.[/QUOTE] Thanks bro, now to calculate prices and decide between doing this first or romanian handgaurds on rpk first. [editline]4th March 2011[/editline] oh wow.