Drugs Discussion Questions Thread V "how many weed needles is too many?"
5,761 replies, posted
[QUOTE=June;46640921]so i'm planning on ordering some mxe from the darknet tomorrow, anything i should be aware of? I picked up a milligram scale today and i've done quite a bit of reading up on it.
[editline]5th December 2014[/editline]
my only experience with dissociatives is DXM which i enjoy immensely, but the whole chugging cough syrup really puts me off the stuff so i'm hoping MXE will be a nice alternative[/QUOTE]
order domestically
use pgp
find trusted vendor
[QUOTE=cody8295;46641028]order domestically
use pgp
find trusted vendor[/QUOTE]
the vendor i found i pretty popular and within my country (although i think MXE may be legal in Canada)
but what is pgp?
[QUOTE=June;46641049]the vendor i found i pretty popular and within my country (although i think MXE may be legal in Canada)
but what is pgp?[/QUOTE]
pretty good privacy, a great encryption tool. i made a thread tutorial not long ago
[QUOTE=nutcake;46637806]Does anybody else have trouble smoking joints or very small pipes because of the heat of the smoke? I can feel it burning the back of my throat and it makes for a very unpleasant experience so I usually just smoke bong but is there anything I can do to make it easier?[/QUOTE]
Are you sure it's the heat? Could it be you're inhaling in a way that sends the smoke straight to your lungs, rather than leaving it in your mouth then inhaling it? Idk if it makes a huge difference but I do it when my throat's not well and it seems like it works
gonna be keeping detailed logs of my trichocereus bridgesii seeds, germination time, light supplied and duration, water, height, etc. I'll be starting with 5 seeds
HK-1 through HK-5
I will also be propagating my trichocereus pachanoi around the same time. I will cut about the top inch or 2 off both plants and replant them. This will induce a few more arms to bud on each plant. Also the cuttings should grow into big specimens. All shall be recorded thoroughly.
goddamn fruity pebbles weed tastes awesome
So turns out that one of my coworkers sells weed so I bought a bit from him today.
What's the best way to consume weed that doesn't involve smoking it? Can't really afford to have that smell in my room.
[QUOTE=June;46640921]so i'm planning on ordering some mxe from the darknet tomorrow, anything i should be aware of? I picked up a milligram scale today and i've done quite a bit of reading up on it.
[editline]5th December 2014[/editline]
my only experience with dissociatives is DXM which i enjoy immensely, but the whole chugging cough syrup really puts me off the stuff so i'm hoping MXE will be a nice alternative[/QUOTE]
If you come from DMX to MXE it might feel like a step up, but if you can get your hands on some somewhat pure Ketamine(Which is harder than you'd think these days) It would IMO blow MXE out of the water.
[QUOTE=StrawberryClock;46644250]So turns out that one of my coworkers sells weed so I bought a bit from him today.
What's the best way to consume weed that doesn't involve smoking it? Can't really afford to have that smell in my room.[/QUOTE]
decarboxylate it then eat raw or with food
[QUOTE=cody8295;46645353]decarboxylate it then eat raw or with food[/QUOTE]
Thanks.
yo this is going to sound like some vile ass shit but I need some questions answered
So i took my bowl, soaked it in isopropyl alcohol for a few hours. Poured out the iso into a pyrex dish, and let it evap. Took a blow dryer and evapped the water that was left and I was left with this resinous substance. So I took some of it, dropped it in my bowl, and light it up. It feels SO weird, I think there's a lot of DMT resin in there since this is the first time I've cleaned this bowl and I've smoked all my DMT out of it. There's also a weed feeling as well, and to add to all of that it makes my throat feel weird. The smoke isn't harsh or anything but the throat hit is crazy.
So basically my questions are:
1. Am I killing myself/putting myself in any danger by doing this?
2. Would DMT resin survive the extraction + heating with the blow dryer?
I use isopropyl alcohol to clean my pieces/grinder and make reclaim hash all the time. I don't know if DMT resin would survive, but as along as all of the isopropyl has evaporated, the reclaim is perfectly fine to smoke.
iso is known to leave a taste
whether or not you may have extracted some dmt is possible if you were smoking [I]freebase [/I]dmt latley
as long as you're using pretty pure iso to get the best clean and then letting it evaporate properly, it'll be good. that throat hit you're getting is probably the last essences of the iso burning your throat going down.
[QUOTE=cody8295;46666927]iso is known to leave a taste[/QUOTE]
Not if you are doing it right. If you're tasting ISO in your reclaim, you fucked up
I've heard even after all the iso is gone it can leave an aftertaste or something. Not entirely sure
I think the problem is that people aren't letting it dry long enough. You don't want it sticky/wet.
I rinse my pieces/grinder into a pyrex dish. Then I put the dish into a pan of water, slap that bitch on the stove and bring it to a boil. You gotta keep an eye on it and make sure your kitchen is well aerated. I usually wear a surgical mask (covers nose/mouth) to avoid inhaling the vapors, and do not smoke around it. The reclaim should not be so dry that that you have to fight to scrape it from the dish, but you do not want it wet and sticky.
[editline]8th December 2014[/editline]
You can do the other, longer method. Rinse it onto a flat plate/dish and set it in front of a fan (I prefer using a space heater) and wait until it's all evaporated. Using that method, however, I've found the reclaim to have some bit of iso taste. In that case, throw that bitch back in front of the fan/heater and give it a little while longer. Don't be impatient if you are going to use that method
[editline]8th December 2014[/editline]
Done right, it should scape up pretty easily, and have the consistency of warm resin (which it pretty much is, unless you filter it)
If you want cleaner reclaim, filter it through a coffee filter and then dry it
[QUOTE=Anubis678;46669679]I think the problem is that people aren't letting it dry long enough. You don't want it sticky/wet.
I rinse my pieces/grinder into a pyrex dish. Then I put the dish into a pan of water, slap that bitch on the stove and bring it to a boil. You gotta keep an eye on it and make sure your kitchen is well aerated. I usually wear a surgical mask (covers nose/mouth) to avoid inhaling the vapors, and do not smoke around it. The reclaim should not be so dry that that you have to fight to scrape it from the dish, but you do not want it wet and sticky.
[editline]8th December 2014[/editline]
You can do the other, longer method. Rinse it onto a flat plate/dish and set it in front of a fan (I prefer using a space heater) and wait until it's all evaporated. Using that method, however, I've found the reclaim to have some bit of iso taste. In that case, throw that bitch back in front of the fan/heater and give it a little while longer. Don't be impatient if you are going to use that method[/QUOTE]
Iso extraction definitely leaves behind an aftertaste. We had some qwiso and put it in the vacuum oven for a few days and the taste was still there.
Also, goes without saying, but 91% ISO is the best, but I use 70% without any problems. With 91%, your reclaim is going to be cleaner and slightly more potent, or so I've heard. I've only used 91% a few times, and I didn't notice too much of a difference in quality, but using 91% makes the process go a whole lot quicker (obviously). Using my first method with 91%, you want to pay more attention to the process and definitely make sure there is excellent airflow in your kitchen. I open all the windows and have a fan blowing over the dish while it boils down, directing airflow towards an outward-pointing fan sitting in the closest window.
[editline]8th December 2014[/editline]
[QUOTE=its shortie;46669725]Iso extraction definitely leaves behind an aftertaste. We had some qwiso and put it in the vacuum oven for a few days and the taste was still there.[/QUOTE]
You're right, all of my extensive personal experience is wrong. Because, you know, it's not like I do this all the fucking time.
How bad is it to drop a pill every weekend?
x?
You're gonna lose the magic going that way. I would advise against it. I take at least 2 weeks, but prefer to do it only once a month or so. But my molly connect ran dry so it's been a while.
[QUOTE=Zethiwag;46669793]How bad is it to drop a pill every weekend?[/QUOTE]
not good, but probably not all that bad either, depends on you, what other drugs you do etc...
The longer you wait between dosing, the longer you give your brain time to replenish depleted neurotransmitters, the better the effects you'll experience. I used to go hard on shit as much as possible, but now I prefer to wait between dosing to get the most out of it. Why miss out on the full experience just to get a buzz more often?
[QUOTE=Anubis678;46669812]x?
You're gonna lose the magic going that way. I would advice against it. I take at least 2 weeks, but prefer to do it only once a month or so. But my molly connect ran dry so it's been a while.[/QUOTE]
Yeah, ecstasy. Most weekends I end up taking one, but building a tolerance is a good enough reason to stop for a while.
[QUOTE=Anubis678;46669847]The longer you wait between dosing, the longer you give your brain time to replenish depleted neurotransmitters, the better the effects you'll experience. I used to go hard on shit as much as possible, but now I prefer to wait between dosing to get the most out of it. Why miss out on the full experience just to get a buzz more often?[/QUOTE]
Totally agree with you, the first times I had done it this semester were way better than they are now.
Are you getting molly or rolls? Do you know what your stuff is cut with? It's not particularly relevant, I'm just curious.
Molly tolerance sucks. I've love to be able to roll once a week. But molly without that magic is just not worth it.
[QUOTE=Anubis678;46669895]Are you getting molly or rolls? Do you know what your stuff is cut with? It's not particularly relevant, I'm just curious.
Molly tolerance sucks. I've love to be able to roll once a week. But molly without that magic is just not worth it.[/QUOTE]
UK here, what's the equivalent of molly and rolls? If we get them in pills it's £10 and we call it pills, if we buy the brown crystal rocks it's called MD and costs £30 for a gram.
New question: is buying a gram of MD much better value for money, considering you can split into several bombs?
MD = MDMA = Molly
Rolls = MDMA (hopefully) + other drug (pretty much always) + binders/etc
Sorry if that's not what you're asking.
If rolls are 10 and a g of molly is 30, your rolls are either bomb as fuck or your molly is cut to shit/just shit
I usually dose 200-300mg when I roll (deep web shit, too). 300mg was fucking insane.
Depending on the purity of the molly, it's pretty much ALWAYS the better option. Especially if you don't know what the rolls are cut with. I've had shit cut with coke which was decent, and then I've gotten shit cut with heroin which wasn't. And then I've gotten bunk bombs. With molly, you can usually tell how good/true it is. Though I have gotten rock MDA in the place of MDMA. It was still great, but not the same, not nearly as warm/empathic.
BTW, mainlining MDA/MDMA is faaaaaantaaaaastic
[editline]8th December 2014[/editline]
I'm in the US, though. My advice may not always be applicable. I don't know what quality of drugs you're used to, or what the normal prices are.
Around here, a g of molly is usually $80-100, depending on how good it is and how much is floating around the city (I live in a small-ish city). I haven't seen rolls in years, but they usually went for $10-15. I'll never buy rolls again though.
Good shout. I guessed it was like that. What's mainlining?
[QUOTE=Zethiwag;46670418]Good shout. I guessed it was like that. What's mainlining?[/QUOTE]
To use an IV to administer your drug, protip: don't do it. :v:
I personally always go for crystal over pills with mdma.
Sorry, you need to Log In to post a reply to this thread.