The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

[QUOTE=Kath;42476103]Viper Tech, son[/QUOTE] The main point of this project is me building it from the ground up, and upgrading it and shit later on down the road. The only viper techs I've seen are complete guns that are pretty much good to go OOTB, and expensive as hell too

[QUOTE=Herfjotur;42477875]Slav. Track suit. Pumas. Vodka. Chicom. But as far as a serious kit goes, I'd say something like an idea you have. Some kind of vehicle kit.[/QUOTE] Honestly this is the best loadout idea since actual soldiers hate the AKS-74u, and its very acquirable for gopniks.

Ugh, one of my glock mags is faulty so it has this funny tendency of ejecting a ton of silicone oil every shot (mebbe the feeding nozzle is shitty because it only takes silicone oil and not the gas?? Idk) but anyhoo, it gummed up the loading nozzle apperatus thing with a bunch of silicone oil so my slide only functions 9/10th of the way and the loading nozzle retracts really slow and I have to push the slide back into place before it cocks so I can fire it It's not fatal is it? I intend to take it apart and clean it when I get home

[QUOTE=Wulfram;42475747]Off the the top of my head theres: WE KJW G&P VFC(they make a m27 iar) King Arms GHK(kinda) KWA Inokatsu(lol) [/QUOTE] you listed brands, not systems. systems wise: WA Magna System -used in: g&p WOC (WA Official Custom), obviously WA, KA, JG/AGM. then WE open bolt system Inokatsu system/viper (cross compatible) KJW/TK system KWA/KSC system VFC system GHK system (i barely consider this a real GBB since its that stupid box) [editline]10th October 2013[/editline] and bomber, which is really just fancier g&p WOCs [editline]10th October 2013[/editline] and VFC make more GBBs than just m27 iar

Does anyone know if Hassayampa Surplus is a reputable retailer? [url]http://www.shop.hassayampasurplus.com/main.sc[/url] I think I actually found out about this site on a previous sticky that was here, but I guess it didn't make the edit

Hassayampa is bueno

HASSAYAMPA IS THE BEST, IT'S THE BEST, IT'S NUMBER ONE, YOU LIKE HASSAYAMPA, YOU DRINK SAM ADAMS, YOU ROOT FOR THE BOYS, ONLY THE BEST WILL DO /regularcarreviews

[QUOTE=dwt110;42483382]you listed brands, not systems. systems wise: WA Magna System -used in: g&p WOC (WA Official Custom), obviously WA, KA, JG/AGM. then WE open bolt system Inokatsu system/viper (cross compatible) KJW/TK system KWA/KSC system VFC system GHK system (i barely consider this a real GBB since its that stupid box) [editline]10th October 2013[/editline] and bomber, which is really just fancier g&p WOCs [editline]10th October 2013[/editline] and VFC make more GBBs than just m27 iar[/QUOTE] I'd like to note that the TK system is without a doubt the best

[URL="http://www.stalkersat.com/joomla/index.php?option=com_kunena&Itemid=4&func=view&catid=5&id=7929"]http://www.stalkersat.com/joomla/index.php?option=com_kunena&Itemid=4&func=view&catid=5&id=7929[/URL] Where can I find this vest package nowadays? I remember ebaybanned used to sell it but it's not there anymore

So I took apart my glock 18c as previously mentioned... ... and wtf? This plastic slide has this shitty system so I have to wedge a knife or sharp object to between the metal nozzle housing thing and slide to bend the slide apart so I can somehow knudge that shit out Wtf I ain't putting this shit back together - I'm fucking getting a new slide and getting this over with

But are you going to get THE new slide?

Huehuheueueh when I get my next paycheck (SOON™) AND I quit my bitching and put that shit back together Turns out I didn't stick enough silicone lube in the nozzle :suicide: [editline]11th October 2013[/editline] At least now I'm prepared 'cause I know my slide now - inside and out Green gas is also tearing apart the slide (the slide catch is digging into the plastic slide itself and it's chipping) ~SO STOKED~

[QUOTE=Kill001;42486381]Huehuheueueh when I get my next paycheck (SOON™) AND I quit my bitching and put that shit back together Turns out I didn't stick enough silicone lube in the nozzle :suicide: [editline]11th October 2013[/editline] At least now I'm prepared 'cause I know my slide now - inside and out Green gas is also tearing apart the slide (the slide catch is digging into the plastic slide itself and it's chipping) ~SO STOKED~[/QUOTE] from what I gather, plastic slides are usually the first thing that anyone recommends you replace on a gun, because they're prone to breakage, being one of the more active parts of a gun.

I'm looking for a holster that will fit my USP.45 with a taclight attached. any recommendations? I wouldn't mind a thigh holster or anything. Tan is a requirement.

Where is cheapest place to get X-300 or similar light for my Glockenspiel 18

Gonna stop buy ACE to pick parts for a mosfet, but I have no idea what to look for for the actual mosfet itself. I know I need resistors, and I have pretty much everything else, but the main part is what I'm unsure of. I'm following this guide btw: [url]http://unconventional-airsoft.com/2009/08/26/how-to-make-a-basic-mosfet-switch/[/url]

[QUOTE=Zero_X54321;42489255]I'm looking for a holster that will fit my USP.45 with a taclight attached. any recommendations? I wouldn't mind a thigh holster or anything. Tan is a requirement.[/QUOTE] Your best bet would be a custom Kydex holster if you want the tac light

Hey, anyone with WE GBBR modification experience, possibly Ender since he had this gun.. Do you still have to modify the bolt to get an NPAS in the WE l85a2? Or is it even easier and I can just drop the whole new RA tech npas assembly into it?

[QUOTE=apoctank;42489687]Gonna stop buy ACE to pick parts for a mosfet, but I have no idea what to look for for the actual mosfet itself. I know I need resistors, and I have pretty much everything else, but the main part is what I'm unsure of. I'm following this guide btw: [url]http://unconventional-airsoft.com/2009/08/26/how-to-make-a-basic-mosfet-switch/[/url][/QUOTE] International Rectifier IRLB3034PBF n-channel mosfet this specific model if you can't find it order it off digikey, you want this exact one

[QUOTE=draugur;42493716]Hey, anyone with WE GBBR modification experience, possibly Ender since he had this gun.. Do you still have to modify the bolt to get an NPAS in the WE l85a2? Or is it even easier and I can just drop the whole new RA tech npas assembly into it?[/QUOTE] Pretty sure the RA-Tech OB NPAS is compatible with all of them

[QUOTE=venom;42494522]Pretty sure the RA-Tech OB NPAS is compatible with all of them[/QUOTE] Thank god because last I knew, you had to modify shit and it was pretty sketchy.

There's a bunch of how-to videos on YT, maybe check them out

[QUOTE=the_killer24;42494348]International Rectifier IRLB3034PBF n-channel mosfet this specific model if you can't find it order it off digikey, you want this exact one[/QUOTE] IRLB3034PBF or IRLB3034PBF ND?

it looks like they're the same thing but with the -nd being digikey's in house label just order the not-nd though

What does IFAP think about the Bravo RDW?

Anyone got experience making Kydex drop leg holsters? I know how to make the holster itself, but I have no clue how to mount it to, say, a MOLLE panel.

Chicago screws or Molle-loks.

[QUOTE=ramirez!;42513331]Anyone got experience making Kydex drop leg holsters? I know how to make the holster itself, but I have no clue how to mount it to, say, a MOLLE panel.[/QUOTE] My friends make theirs compatible with Blackhawk! mounts, so you simply screw the holster into the mount you like and you're set.

[QUOTE=notrabies;42513576]My friends make theirs compatible with Blackhawk! mounts, so you simply screw the holster into the mount you like and you're set.[/QUOTE] How do they go about that? Is there like a certain way to set the lower side to make room for the screws? Looking at it now I was thinking of riveting it to a separate panel and weaving it to a leg panel.

looking for a cheap, high quality chest rig/assault vest, probably milsurp. any ideas/price range?