The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

obligatory chicom recommendation

[QUOTE=ShadowSocks8;42512134]What does IFAP think about the Bravo RDW?[/QUOTE] I have my friends sitting around somewhere. I'd say it's just your average china AEG, if you like the PDW and can't afford VFC/WE/GHK then go for it, but if you want something on the higher end of performance for a clone, looks elsewhere

[QUOTE=trotskygrad;42515353]looking for a cheap, high quality chest rig/assault vest, probably milsurp. any ideas/price range?[/QUOTE] For AK platform, Chicom. For M16 Platform, ELBV/LBV-88 with ALICE Belt. Both are common and cheap.

picked up a chicom. was considering building a traditional belt + suspender + AK mag pouches rig, but I figure I can pick such a setup up when I go to russia.

[QUOTE=trotskygrad;42517449]picked up a chicom. was considering building a traditional belt + suspender + AK mag pouches rig, but I figure I can pick such a setup up when I go to russia.[/QUOTE] It is possible to use an ALICE Belt and Suspenders to accept AK-mag pouches, however expect parts incompatibility and modification.

[QUOTE=Rageblood;42517573]It is possible to use an ALICE Belt and Suspenders to accept AK-mag pouches, however excpect parts incompatibility and modification.[/QUOTE] dunno man I want that classic soviet oppressor look yo. plus I probably can get them cheap as hell if I plan ahead.

So I've had this AEP for over 2 years: [url]http://shop.ehobbyasia.com/cyma-p226-aep-1.html[/url] But I needs a new hop up for it... and a few other parts. Do you guys know where I could find them?

hey is they any way to modify this to fit in an ak74? if not I can always just weld the actual handle on. [url]http://www.evike.com/product_info.php?products_id=44131[/url]

holy shit evike's site remodel actually makes it look better than it did previously (HINT HINT CERTAIN OTHER AIRSOFT SITE) it looks like it would be (mostly) a drop-in fit, but i'd expect wobble

It's like a polished turd right now though, they have a lot of cleaning to do and a lot of old defunct and useless shit with bad product pictures, and still need to get rid of that god awful product gridding system.

at least it's not like ASGI where they keep adding on pointless shit for no reason they just updated their buttons now they have [I]three[/I] different buy/add to cart button styles for no reason [img]http://puu.sh/4QroT.png[/img] [img]http://puu.sh/4QrnC.png[/img] [img]http://puu.sh/4Qroq.png[/img]

also, this, [url]http://www.evike.com/product_info.php?cPath=21_672_719&products_id=30129[/url] this is a cm031 I believe... good or bad?

You want this [url]http://www.airsoftgi.com/product_info.php?products_id=4006[/url]

you don't want that either [url]http://www.airsoftgi.com/product_info.php?products_id=4735[/url]

047 is VFC I thought, no?

no it's marui

I actually want a marui barrel system so I can buy this [url]http://www.evike.com/product_info.php?products_id=24568[/url] and make a Tabuk

Oops, I blew it.

"Someone"(KILLER) should make a guide to clone AK compatibility

I need to get my AK to shoot at CQB friendly speeds until sunday (currently at 1.25 joule or so) and I really don't want to change the spring.. Half-cycle to compress the spring until then, crank up the hop and use really heavy BB's so it wont overhop? Or will I just have to change the spring anyway?

you'll have to change the spring.

Fuck.

*SNIP, SOLVED IT*

Does anybody here know the quality of the WE P226 compared to the KWA P226? I know that WE's new line of pistols are much better than their 1911s and M9s and that some KWA models aren't very good such as their 1911s.

I've heard the KWA P226 is one of their worse pistols, and apache really likes the WE, so I'd go for that

the disassembly lever is really crummy though, mine snapped so you'll want to have a non-we replacement on hand [editline]15th October 2013[/editline] i know a guy who's been trying to get rid of a kwa 226 package for about two years now with absolutely no takers so that should say something about the (lack of) quality [editline]15th October 2013[/editline] [QUOTE=noneshallpass;42527745]I actually want a marui barrel system so I can buy this [url]http://www.evike.com/product_info.php?products_id=24568[/url] and make a Tabuk[/QUOTE] why don't you just get a cyma rpk, m70 handguards, svd flash hider, and modify some cheap ak stock to have the hole in it [editline]15th October 2013[/editline] you'd need to either change out the bolt carrier and rewire to top or somehow find a way to put the battery in the stock though...

Any specifics on what exactly is wrong with the KWA? My friend wants to learn more about what to buy and what not to buy.

[QUOTE=TehG3A3;42536261]Any specifics on what exactly is wrong with the KWA? My friend wants to learn more about what to buy and what not to buy.[/QUOTE] It'd be great for people to post stuff other than "It's shitty" Why? What about it makes it shitty? I want to know too, so I can expand my knowledge on this subject.

I own a KWA USP and owned a KWA MAC-11. Neither have had any issues and have both functioned flawlessly, very reliable guns. I know KWA has some bad models. My friend was interested in a P226, USP, or M9. I told him WE for P226, KWA for USP, and KJW for M9.

I've got a KWA MP9 NS2, shit's great except the charging handle snapped and I've yet to get a replacement Also have KJW's P226, which was overall meh the finish on the pistol was really overly shiny, wore really quickly, and the magazines ALWAYS leaked the decocker broke and now it just doesn't really work at all Then there's my RWA custom TM Glock 18c and it's perfect in every way