The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

yes

[QUOTE=the_killer24;43262905]"it won't shoot" is the most general description you could have possibly given us so nobody has any real idea what the problem is[/QUOTE] Sorry, so I just installed a new spring into the gun and shined the barrel with some sparkle. right after I put it back together I tuned the motor but it wouldn't pull the piston back, So then I took it apart again and made sure everything was in place and put it all back together and it worked all the internals seemed ok but then when i fired it one bb came out and no others.

Would this holster a Hi Capa 4.3? [url]http://www.taiwangun.com/en/1911-paddle-belt-holster-w-drop-leg-platform-a-c-m-2[/url]

Probably not.

I guess this isn't all that airsoft related but i'll be using it for airsoft if i buy it so here goes. I'm looking at helmets for a certain loadout and the one i'm thinking of aparrently has '1858 - NVA - 1989 GR. 53/54' written on the label. Would i be correct in assuming 'NVA' means it's east german?

Where can I get a good scope protector/kill flash for this matrix tube scope? [url]http://www.evike.com/products/33056/[/url]

home depot get a piece of lexan and cut it to fit inside the rim of the optic

[QUOTE=FloaterTWO;43306109]I guess this isn't all that airsoft related but i'll be using it for airsoft if i buy it so here goes. I'm looking at helmets for a certain loadout and the one i'm thinking of aparrently has '1858 - NVA - 1989 GR. 53/54' written on the label. Would i be correct in assuming 'NVA' means it's east german?[/QUOTE] Si, the GR. also denotes its sizes. All German shit you'll see will have "GR." or "GR. NR." on it

Excellent, I had a suspicion so i went out on a limb and bought it. I'm glad it paid off. And here i was thinking an NVA tanker's helmet would be a pain in the ass + expensive to find :v: I now realize it might be a little too small since i keep forgetting helmets have sizes too but oh well.

how can I mount my matrix bayo onto molle?

Zipties

I want to buy myself a gift. Was thinking about a UMP. Give me other suggestions

DG kit for your FAL =)

was only going to spend about $300, but maybe... [editline]26th December 2013[/editline] if I had like 300 more dollars, I'd totally do it.

The KJ-Works P226 had a problem with leaky mags, right?

Anyone know where to get a cheap plastic m16a1 upper? I am going to cut the carrying handle off and make it a c8 removable carry handle.

[QUOTE=BBOOBBYY!;43321995]The KJ-Works P226 had a problem with leaky mags, right?[/QUOTE] No firsthand experience, but I've heard that it does on a few occasions.

[QUOTE=BBOOBBYY!;43321995]The KJ-Works P226 had a problem with leaky mags, right?[/QUOTE] The KJW P226 is quite possibly the worst thing ever.

[QUOTE=Apache249;43325121]The KJW P226 is quite possibly the worst thing ever.[/QUOTE] old we m9

As terrible as the KJW P229 is, the half hour I had mine working were the most amazing minutes of my life. Thing had incredible kick and felt ungodly solid, I was in love until the takedown lever snapped in half and rendered it inoperable.

Yep, can 100% agree with what bb said Absolutely fucking awesome, I ran the shit out of mine for like 4 hours until the mags all sprung leaks simultaneously

Speaking of 226'es, is the WE P226 better?

yeh it still suffers from WE-itis on some parts (that damn takedown lever) but the mags are screwed instead of pinned which is amazing

Someone recommended that I buy WE M9 mags rather than KJW M9 mags because of construction. What do you guys think?

King arms Mosin nagant. Does anyone think it's any good? I'm considering tossing every plan I have at the moment out the window and get this instead. I found it for sale for not that expensive compared to the other mosins out there.

[QUOTE=Joetehpsycho;43330288]Someone recommended that I buy WE M9 mags rather than KJW M9 mags because of construction. What do you guys think?[/QUOTE] i can't tell the difference between mine (got a $3 WE from the evike thingy) besides the markings on the baseplate and the pins (kjw are hollow, we are solid) we fill valves are REALLY brittle though (this applies to all of them, not just the m9 mags) [editline]27th December 2013[/editline] oh yeah i had slightly better lip-nozzle seal with the KJW mag on my KJW though that's just brand compatibility

this might be a bit of a dumb question but I'm a bit new to this and don't quite know my stuff yet are there any retailers in Canada / at all that sell custom badges? IE you give them an image or something and they make / order one?

I just got an RC tank with an air gun that shoots 6mm pellets (they fucking hurt too). Since I'm in Australia does that mean I possess an illegal weapon?

[QUOTE=Dramiek;43330955]this might be a bit of a dumb question but I'm a bit new to this and don't quite know my stuff yet are there any retailers in Canada / at all that sell custom badges? IE you give them an image or something and they make / order one?[/QUOTE] Get on Google and you'll find 101 companies that'll make badges to order from an image. [QUOTE=ScottyWired;43331002]I just got an RC tank with an air gun that shoots 6mm pellets (they fucking hurt too). Since I'm in Australia does that mean I possess an illegal weapon?[/QUOTE] Rob a bank with it.

Hey lads. I've got a simple problem here. About two days ago I picked up some king arms m4 mid cap mags so I could use them in a game. (I have A colt m4 cqb. The high cap that comes with it works fine btw) Unfortunately, not one of them feeds. At all. If I put pressure on the front and bottom they feed in hiccups, but other than that no good. First idea was to wrap them in tape to tighten the fit, but it does no good. I know this is a stupid question but I'm new and I don't want to spend money on stuff I don't need. Tl;dr my mags don't work.