The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

No

How do I set these up back in the upper receiver? [t]https://dl.dropboxusercontent.com/u/71368030/Airsoft/hop%20up%20cover.JPG[/t] hepl

i need some walkie talkies for communication, but I'm pretty poor... do you guys know of any relatively cheap ones that dont totally suck ass?

[QUOTE=Desert Rat;43444840]i need some walkie talkies for communication, but I'm pretty poor... do you guys know of any relatively cheap ones that dont totally suck ass?[/QUOTE] asgi sells a pair of midland walkie talkies for 40 bucks

I use a Motorola MR350R. You can get a pair for about $50.

Faking trades on my g36. How do? Is there like a stencil somewhere I can print? [editline]6th January 2014[/editline] This doesn't look too hard. [t]http://i.pgu.me/lCw2zfTp_original.jpg[/t]

What is the general opinion on modern WE pistols?

[QUOTE=LurkietheLurker;43448674]What is the general opinion on modern WE pistols?[/QUOTE] High Lemon rate, but when you get one that works, it seems to work forever. Just going off of what I read.

[QUOTE=LurkietheLurker;43448674]What is the general opinion on modern WE pistols?[/QUOTE] I am in love with them. I've had three of their glocks so far with no failures and I'm planning to buy a fourth in the near future. It also helps that their external quality is top notch. Most of their guns may lack trades, but the externals are nice. Both of my WE GBBRs have been some of the most solid guns I've ever held, and I receieved a WE KAC rail in a trade that surpassed G&P in quality.

[QUOTE=LurkietheLurker;43448674]What is the general opinion on modern WE pistols?[/QUOTE] I've had two of them, a Hi Capa 5.1 and a Hi Capa 7" Dragon I got in a trade. Both of them perform excellently, good recoil, seem durable enough. The biggest downfall, and my only real problem with them is their magazines. Every WE Hi Capa mag I've owned has leaked at some point, and if you drop them on the floor, the plastic feeding lips are prone to breaking.

that's the exact opposite of my we glock mags i haven't had any way of safely releasing the gas in them since my glock's hammer broke but they've held their remaining charge for 6 months straight so far

[QUOTE=the_killer24;43454768]that's the exact opposite than my we glock mags i haven't had any way of safely releasing the gas in them since my glock's hammer broke but they've held their remaining charge for 6 months straight so far[/QUOTE] I'm super excited for the polymer WE Glock mags. Cost the same as an AEG mag and weigh nothing.

[QUOTE=Herfjotur;43454843]I'm super excited for the polymer WE Glock mags. Cost the same as an AEG mag and weigh nothing.[/QUOTE] I know, at $16 a piece, I'm gonna have to buy 4 more and just have 4 metal mags and 4 polymer mags. I already love how light the G17 is with the plastic slide and the mags are just gonna make it better.

Didn't know that thanks for the news. Might buy my first sidearm when/if they're coming out soon. I don't know much about the WE glocks, especially with all the different models and numbers (uh G17 is the first one right?). Recommendation for starter to GBB pistols?

[QUOTE=TerrorShield;43455638]Didn't know that thanks for the news. Might buy my first sidearm when/if they're coming out soon. I don't know much about the WE glocks, especially with all the different models and numbers (uh G17 is the first one right?). Recommendation for starter to GBB pistols?[/QUOTE] If you like glocks or other poly-frames, WE. If you like hicapas, KJW. If you wanna splurge, KWA, or TM's can be had for really reasonable prices from echigoya. [editline]7th January 2014[/editline] only thing that sucks is if you want a WE glock, you'll probably have to buy over seas. Glock seems to be cracking down again. [editline]7th January 2014[/editline] [url]http://www.wgcshop.com/wgc2008/main/content_page.php?search=category&rs=WE%20Gas%20Pistols&catid=7&cat=309[/url]

Canada has the funny situation where KWA, WE and KJW all cost almost or exactly the same around 200. however I don't like Glocks, no where has KJW hicapas, and kwa is a bit weird in availability. Right now I am a little uncertain as to where to turn, I have some interest in 4.3 hicapas, a p226 or USPs. The only 4.3s I have found are WE for 175, p226s are either 165 for the KJW with questionable reviews or the always out of stock/200 WE p226, and KWA USPs are anywhere between 200 and 275. EDIT: What is the opinion on the WE 4.3s?

How do I take off the flash hider on my CQB GR-16?

In all honesty would a WE 4.3 be bad? are they in-particular known for anything? if so, I would appreciate suggestions from any Canadians.

I think the WE 4.3 models are good, and they're much easier to find a compatible holster for than a 5.1. My friend's performed pretty much exactly like my 5.1, good kick, good groupings.

don't buy the KJW 226

[QUOTE=LurkietheLurker;43470920]In all honesty would a WE 4.3 be bad? are they in-particular known for anything? if so, I would appreciate suggestions from any Canadians.[/QUOTE] [url]http://airsoftdepot.ca/catalog/product_info.php?cPath=112_122&products_id=2250[/url] [editline]9th January 2014[/editline] Best price i could find

yep, exactly what I was looking at.

what's the opinion on shining inner barrels, and would sparkle brass and copper polisher work on a king arm ultra grade M4?

[QUOTE=Crash155;43441847]How do I set these up back in the upper receiver? [t]https://dl.dropboxusercontent.com/u/71368030/Airsoft/hop%20up%20cover.JPG[/t] hepl[/QUOTE]

Just attach the thing on the right to your charging handle, throw that whole assembly in there, then put the dummy bolt in. Kinda have to maneuver it weird but it's not hard

Got a G3, all my mags are High-cap. Winding these mother fuckers is a bitch because my G3 eats ammo like a fat guy at a free buffet. A friend of mine told my I should just use the little winding keys. Any ideas on how I could go about winding these things easily? I usually have to wind and fire at the sametime or else the gun won't take more than ~5 bbs before it stops. I'd use the key but I'm afraid I'll loose it. edit: I meant to say, I can't get any mid-caps at the moment.

Are you winding them until they get really hard to wind and the sound goes from click click click to sounding like something is breaking inside of them? Because you're supposed to do that.

[QUOTE=GREN EYGS N HAM;43485007]Are you winding them until they get really hard to wind and the sound goes from click click click to sounding like something is breaking inside of them? Because you're supposed to do that.[/QUOTE] Eh, I usually wind them until they sound different on wind. Like, they don't have the same clicking sound like they usually do. If I wind it more it usually doesn't do anything else. Edit: Using the winding key, I did what you said to do and and did the click. It took like five minutes though.

Usually lerk but figured I'd make an account to ask you all something, what would you guys suggest for a pistol within the price range of $150~180?

[QUOTE=TheMrFailz;43485051]Eh, I usually wind them until they sound different on wind. Like, they don't have the same clicking sound like they usually do. If I wind it more it usually doesn't do anything else. Edit: Using the winding key, I did what you said to do and and did the click. It took like five minutes though.[/QUOTE] Yeah you're supoosed to wind it until it goes from a light click to te point where the spring is fully wound and simply won't gain more tension. Then the sound will go from a click to a klok sound and the wheel should have gotten quite stiff.