The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?"

[Foos]

[QUOTE=Orki;43774524]Im scared.[/QUOTE]

embrace your new airgat waifu

[CodeMonkey3]

Anyone know where I can a decent Bowman EVO II/III replica? Or a real one? The Z-Tac one I had is a piece of shit.

[apoctank]

[QUOTE=CodeMonkey3;43777702]Anyone know where I can a decent Bowman EVO II/III replica? Or a real one? The Z-Tac one I had is a piece of shit.[/QUOTE]

0/10 broke literally the first time I tried to put it on
[IMG]http://i62.tinypic.com/120jmvp.jpg[/IMG]
All I need is a new this thing, what's it called/where can I find one?

[editline]3rd February 2014[/editline]

It's the part that goes on top of your head and attaches to each ear piece

[mousecop]

[QUOTE=apoctank;43779598]0/10 broke literally the first time I tried to put it on
[IMG]http://i62.tinypic.com/120jmvp.jpg[/IMG]
All I need is a new this thing, what's it called/where can I find one?

[editline]3rd February 2014[/editline]

It's the part that goes on top of your head and attaches to each ear piece[/QUOTE]
Headband?

[apoctank]

[QUOTE=mousecop;43780937]Headband?[/QUOTE]

I got the soft part that wraps around the above part when I googled "Sordin headband"

[editline]4th February 2014[/editline]

Also, my "Matrix" M6 has a shitty Xenon bulb and I want a new one. Bulb #1 is a LED, so it'd be my first choice but it looks different than the bulb that's currently in my light, whereas Bulb #2 looks exactly like the one that's in my light right now but I don't know how bright it'll be
Light:
[url]http://www.evike.com/products/30895/[/url]
Bulb 1:
[url]http://www.evike.com/products/28732/[/url]
Bulb 2:
[url]http://www.evike.com/products/27056/[/url]

So basically is #1 compatible with my light and if not is #2 decently bright?

[Nigademus]

If either of those two will fit, then this will fit.
[url]http://www.lighthound.com/Solar-Force-XM-L-U2-Drop-In-27--9-Volts_p_4112.html[/url]

[CodeMonkey3]

I plan to get a Stark Arms Glock 19 at some point. Does anyone know how Ehobby handles trades?

I bought my TM XDM from Redwolf and they fucking filled it with like JB weld and I never did get it all out. They also spray painted the tip of the barrel and like two inches of the slide in orange paint which ruined the finish on TM's plastic slide after I had managed to take it all off.

Uncompany was excellent and just put electrical tape over all the offensive stuff and used like Elmer's glue to glue a little orange cap onto the barrel I was able to just snap off cleanly.

[Orki]

[QUOTE=Kath;43774151]Bury her alive[/QUOTE]

She said it was okay if i bought the engagement ring(I may have promised her one a while back)... I have made a huge mistake D: (Nah, it's all good!)

[Shapedrift]

Anyone know a push to talk button with a mic, and no speaker? The setup I want to have is my midland radio on my back, an aux cable linking it to my Howard Leight headset, and a push to talk button wired from the radio to my chest.

[Nigademus]

R-hop

[felix the cat]

unless you have difficulties operating an x-acto knife and a rat tail file, it's fairly straight forward

[Nikpo]

i stabbed myself in the palm with an xacto knife today

fucking went in pretty far too

[editline]5th February 2014[/editline]

good thing those things are like surgical knives, and it doesn't make a very open wound

[deathmog]

dont even get me started on xacto knives

[Zao Medong]

disable the blowback while you're in there too.

[apoctank]

[QUOTE=Zao Medong;43806391]disable the blowback while you're in there too.[/QUOTE]

For a second there I thought you were talking about venoms hand and I was confused

[felix the cat]

buy r-hop

[felix the cat]

[QUOTE=oakman26;43806489]
could someone link me to the easy way to do r-hop, or tldr it for me.[/QUOTE]

1. file off bump from bucking
2. cut r-hop patch to fit window on barrel
3. adjust depth of r-hop patch with rat tail file until desired results are reached

[Mai]

[QUOTE=oakman26;43806511]can you buy a barrel which already has r-hop done to it :v:[/QUOTE]

for like $100 yeah

[editline]5th February 2014[/editline]

oh yeah rhops don't work with GAYTRIX barrels because the window ain't square

[Fish Muffin]

[QUOTE=the_killer24;43806575]for like $100 yeah

[editline]5th February 2014[/editline]

oh yeah rhops don't work with GAYTRIX barrels because the window ain't square[/QUOTE]
[IMG]http://gyazo.com/784bc15e17151f54dcd09d9771adf879.png[/IMG]

[Mai]

[img]http://www.evike.com/images/large/Barrel_Matrix_ALL_mm_lg.jpg[/img]

its like half the size of a normal window

[Fish Muffin]

oh i was thinking it was like the lonex barrels with the rounded cuts

i mean, you could probably pretty easily file out the barrel window to make it larger. brass is pretty soft.

[Mai]

it's (probably not very high quality) steel

there's a very noticeable weight difference between my GAYTRIX and a stock brass

[editline]5th February 2014[/editline]

i tried the barrel window extension thing on mine and it came out shittacular

[Zao Medong]

[QUOTE=oakman26;43806489]so just get a normal cylinder right?[/QUOTE]

Yup. Just replace the stock one with a regular one and ditch the blowback thingy on top when you're putting it back together.

[apoctank]

Madbull or Prommy

[Orki]

What do you guys think about this?
[url]http://www.aliexpress.com/item/Rail-Interface-System-12-Black-Free-Shipping-R1172/1579798772.html[/url]
Really want to order one to see how the quality is, The original Daniel defense one weights 408 gram and the one on alibaba is 500grams so i would guess it's made of some kind of metal and not plastic.

Edit
[url]http://www.rbo.hk/en/ProductView.asp?ID=349&SortID=305[/url]
here are more pictures, but can't really see if you get everything needed for fitting...

[Zao Medong]

[QUOTE=oakman26;43812476]I think ima leave the blowback cylinder on just bexuase i like having the dust cover pop open.

What barrel 2 buy that can be r-hopped and afordable

Sorry for phone spelling[/QUOTE]

Oh, right, the charging handle rests on the blowback tube on those, doesn't it. My bad. Been awhile since I had mine.

[apoctank]

Well, 455 is seen as the sweet spot for a standard full AEG cylinder, and since it'll cost the same as a 363 from the same brand, I'd say go for it if you don't mind the extra length

[Zao Medong]

Ya know when you see people's impression kits with bolt cutters? Is there a specific set of bolt cutters that the military (SOF units specifically) would use, or do they just use any old pair?

[northshore]

make sure you get the right type of shoelaces too or else your impression is wrong

[Zao Medong]

I take record amounts of shit from stitch-nazis about the little things on this impression I'm doing. It hurts man.