The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

[QUOTE=Zero_X54321;44194040]The Condor Tornado holsters are legitimately universal. [url=http://www.evike.com/search/?search_in_description=1&sort=3a&keywords=Condor+Tornado&x=0&y=0]Here you go[/url][/QUOTE] Agreed, I actually like mine quite a bit, especially compared to other universal holsters.

On the topic of holsters, is a kjw p226 too big for a serpa?

[QUOTE=theryan11;44195992]On the topic of holsters, is a kjw p226 too big for a serpa?[/QUOTE] nope

can confirm dunno why you'd want a kjw 226 though [editline]10th March 2014[/editline] if you already have one, i'm sorry for your loss

Anyone know who makes decent soft armor? I want like an OD PECA. The highest fucking replica I can get. At the very least a GOOD set of foam plate made for a soft armor vest like that. [editline]10th March 2014[/editline] I'll probably just order a tan Toy Soldier one and take the replica armor out of them to use in my OD one. I can always get a cheap tan MBSS and have a pretty sweet SOG kit from like the invasion of Iraq too if I really want to use the tan one sometimes. [editline]10th March 2014[/editline] [t]http://cdn.airsoftsociety.com/forums/attachments/f13/1561d1281147974-navy-seal-ciras-loadout-iraq_p01.jpg[/t] NAVY SEALS I have all the shit to make that kit except a tan MBSS and a tan PECA so I should just get a Toy Soldier and have two loadouts for the price of one set of replica armor. [editline]10th March 2014[/editline] I should get a Eagle MAP pack or another really high quality MAP pack since I literally run khaki/CB MAP's on all my tan rigs. The replica ones are kinda shitty.

[QUOTE=the_killer24;44196081]can confirm dunno why you'd want a kjw 226 though [editline]10th March 2014[/editline] if you already have one, i'm sorry for your loss[/QUOTE] Yeah, unfortunately I have that intolerable piece of shit. I got it half price although it still was not worth it. Couldn't get TM at the time unless you had $650 to spend and I didnt feel like getting a WE for $300 since their 1911s are cancer. Edit: Crye G3 repro is 10 cm too long for me, does the kneepad adjust far enough for me to still get the kneepads on my knee?

[QUOTE=CodeMonkey3;44196715]Anyone know who makes decent soft armor? I want like an OD PECA. The highest fucking replica I can get.[/QUOTE] To be fair, the chinashit replica tan PECA/PACA/whatever the fuck you wanna call it I have isn't that bad, though I have no fucking idea what's inside it (and probably need to get a new one anyway, as it's been quite horribly warped out of shape due to being in the corner under most of my gear for months upon months)

[QUOTE=CodeMonkey3;44196715] At the very least a GOOD set of foam plate made for a soft armor vest like that.[/QUOTE] [img]http://merlin.pl/Meteor-Karimata-1-WARST-EVA-zielona,images_zdjecia,17,5900724780071_1.jpg[/img]

[QUOTE=CodeMonkey3;44196715]I should get a Eagle MAP pack[/QUOTE] RIP Code's wallet.

no dude he rolls the nickels He also spends more on shipping for his jap gear than an eagle MAP costs

that upsets me so much [editline]11th March 2014[/editline] code where do i sign up to work at your shitty best buy job i want to roll the nickels too

Anyone know of any decent antifogging crap I can make from household items that don't involve magnets or vinegar? I'm out of both and can't buy anything at the moment. (Long story short my mask fogs worse than school bus windows. Abeit less dirty though.)

Get a sample of Defog-it [url]https://www.defogitworks.com/[/url] hands down the best anything anyone else says is wrong

[QUOTE=TheMrFailz;44206483]Anyone know of any decent antifogging crap I can make from household items that don't involve magnets or vinegar? I'm out of both and can't buy anything at the moment. (Long story short my mask fogs worse than school bus windows. Abeit less dirty though.)[/QUOTE] clean thoroughly with warm water and soap. Drill 5mm or smaller holes near the edges of your lens. Remove any excess foam from around the goggles. Apply small amounts of gel toothpaste and water to the lens, and then wipe clean.

[QUOTE=Herfjotur;44206517]clean thoroughly with warm water and soap. Drill 5mm or smaller holes near the edges of your lens. Remove any excess foam from around the goggles. Apply small amounts of gel toothpaste and water to the lens, and then wipe clean.[/QUOTE] I know what the first two things would do but what would tooth paste do?

makes a thin clear film over your lens

[QUOTE=BBOOBBYY!;44204895][img]http://merlin.pl/Meteor-Karimata-1-WARST-EVA-zielona,images_zdjecia,17,5900724780071_1.jpg[/img][/QUOTE] this shit is what I used for the soft inserts in my IOTV and I think it works great

Are the hicap PMAGs any good?

I hear not

Where can I learn Vietnam kit?

I've found this to be a pretty decent guide to go by. It's not [I]super[/I] in-depth, but It's definitely a good guide to start by if you need the basics. The guy who wrote it has a really great Vietnam impression. [url]http://www.airsoftsociety.com/forums/f13/vietnam-impression-17810/[/url]

How hard would it be to get a gas bolt action rifle into the country from asia? [I]cough*kill*cough[/I]

I plan on getting an M24 soon, and want to paint it similar to the one in bf2 [t]http://img1.wikia.nocookie.net/__cb20111027084439/battlefield/images/e/e3/BF2_M24_Model.png[/t] what colors should I get and how should I paint it to get a similar design?

solid base coat of krylon camo tan, apply light stripes of a matte deep brown, near black color, apply dirt and scratches, strips of raw linen/burlap

[QUOTE=Desert Rat;44215836]I plan on getting an M24 soon, and want to paint it similar to the one in bf2 [t]http://img1.wikia.nocookie.net/__cb20111027084439/battlefield/images/e/e3/BF2_M24_Model.png[/t] what colors should I get and how should I paint it to get a similar design?[/QUOTE] what a coincidence this might be of interest to you?? [QUOTE=venom;44216209]not my gun but i painted it c: [img]http://u.cubeupload.com/NikolaiSergeyev/L96.jpg[/img] just gotta throw a bit of burlap around the barrel and scope[/QUOTE] used krylon ultra-flat camouflage tan, then did the patterns in their brown, and did more patterns over top/next to the brown in their OD if it comes out too dark you just lightly dust it over in tan again

Whoever at Krylon decided to make those camo colors is a god. [editline]12th March 2014[/editline] thanks to them, all the things that I own are slowly becoming camouflage.

[QUOTE=Wulfram;44206825]this shit is what I used for the soft inserts in my IOTV and I think it works great[/QUOTE] This is what I have in my IBA and indeed it works great. Aside from being hot as fuck in the summer.

I have foam from a yoga mat in my iba. It does indeed get extremely hot

I wonder if you could poke a shit ton of decently sized holes in it so it'd breath better

[QUOTE=apoctank;44225978]I wonder if you could poke a shit ton of decently sized holes in it so it'd breath better[/QUOTE] i was thinking this exactly. a half inch wood drill bit would make decently clean hole's i'd imagine, and it wouldnt take away from the effect it has of bulking up the vest. too many would make it squish out of plate shape though