The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

I only typically wear camo (p. much only combats) "casually" when I'm expecting to do a lot of moving and/or physical work, so I always wear them with olive (or tan, or black) t-shirts and walking boots. Otherwise I haven't worn camo, casually or otherwise, outside of airsoft-related stuff for years. I would totally rock DCU (or the russian choc chip if/when I get my hands on it) casually though.

[video=youtube;Eg_w_s0HERE]http://www.youtube.com/watch?v=Eg_w_s0HERE[/video] do I need to make more fashion videos for you nerdes :v:

[QUOTE=TaiwanesePrick;45203669][video=youtube;Eg_w_s0HERE]http://www.youtube.com/watch?v=Eg_w_s0HERE[/video] do I need to make more fashion videos for you nerdes :v:[/QUOTE] yes plz papa tai.

It's kinda hard to hear your voice

[QUOTE=Comrade24;45202858]i see people at my school wear multicam and tr-color desert pants w/ bloused boots. they arent even in rotc either hnnnng also i saw someone wear full woodland bdus with jungle boots and a fatigue hat to go with it i dont think he was in rotc either because i never see him wear acus + that was the only time i saw him in that uniform[/QUOTE] [QUOTE=theryan11;45203347]theres this one fuck who always wears m81, a beret and bloused boots. he wears all the rank and shit. never talked to him but his posture reeks of douchebag.[/QUOTE] These are prime examples of wearing camo and being a sperg. When I was in high school the only person who ever wore full BDU was this guy who was in the army reserve and I only ever saw him wear it when he first joined. Now in university the only camo I see regularly is realtree worn by all the wannabe rednecks and the occasional Multicam or CADPAT backpack. I also saw someone wearing what appeared to be a realtree Gorka one time.

What's a good way of shortening old reliable here?: [t]http://i.imgur.com/7rDU7bb.jpg[/t]

[QUOTE=Crash155;45204100]What's a good way of shortening old reliable here?: [t]http://i.imgur.com/7rDU7bb.jpg[/t][/QUOTE] I just took a hacksaw and sawed through both barrels. Just measure and see where the inner barrels end (they stop a good bit before the outer barrel does) and then cut a little forward of there. You can basically just unscrew the shell tube cap, sand down the threads, and then hammer it back into the shell tube after the cut. As for the barrel spacer, it can just be unscrewed and hammered back into place after the cut as well. I just unscrewed my front sight and then zip tied and JB Welded it back on after the cut.

I always see people using evike and airsoft GI custom guns at my field, wouldnt those be retardedly overpriced to import and you might as well build the same one locally? edit: by overpriced i mean UPS rapes you and you can only use UPS

[QUOTE=theryan11;45206483]I always see people using evike and airsoft GI custom guns at my field, wouldnt those be retardedly overpriced to import and you might as well build the same one locally?[/QUOTE]People are inherently lazy. Some would just rather click a button on a site and pay more than go and search through parts and retailers and source everything and put it all together. They're missing out on a learning experience.

Those custom guns are generally extremely mediocre

I hollowed out my silencer and now my gunnis really scary sounding, is there anything else I can do to make it even louder?

[QUOTE=theryan11;45212589]I hollowed out my silencer and now my gunnis really scary sounding, is there anything else I can do to make it even louder?[/QUOTE] There are GL attachements in the making which replicate real gunfire. Can't think of the name atm though.

[QUOTE=MrSaphique;45214249]There are GL attachements in the making which replicate real gunfire. Can't think of the name atm though.[/QUOTE] [url]http://bltech.co.nz/[/url] [media]http://www.youtube.com/watch?v=oHr1AN0RKYY[/media]

Would a king arms m4 gearbox be a big upgrade over classic army sportline gearbox, I can get the entire gearbox for 70 and I feel it would make my gun more durable and be able to withstand lipo a bit better, but looking at the gearboxes they seem to have near identical features other then the KA having silver wire and a reinforced shell and gears. Should I spend money on this?

[QUOTE=theryan11;45212589]I hollowed out my silencer and now my gunnis really scary sounding, is there anything else I can do to make it even louder?[/QUOTE] Get a Noveske amplifier. [editline]25th June 2014[/editline] Or whatever the fuck brand they are.

[QUOTE=Taepodong-2;45215019]Get a Noveske amplifier. [editline]25th June 2014[/editline] Or whatever the fuck brand they are.[/QUOTE] I have one and the difference is only a little, unless i use a gas gun

[QUOTE=theryan11;45214948]Would a king arms m4 gearbox be a big upgrade over classic army sportline gearbox, I can get the entire gearbox for 70 and I feel it would make my gun more durable and be able to withstand lipo a bit better, but looking at the gearboxes they seem to have near identical features other then the KA having silver wire and a reinforced shell and gears. Should I spend money on this?[/QUOTE] Ca dprotline is shit fuck ca sportlinr ka is surprisingly good

Question. In the OP it says Airsplat is shite, but I'm looking at the site and the prices aren't too bad. I'm guessing theres another reason it's absolutely shocking?

horrid customer service awful website design sometimes they ship you the wrong thing entirely some people here have bought from them before (me and tai) but i wouldn't buy from them again

dont forget tai only bought from them because they were the exclusive US distributor of the SRC T91

Cheers lads. Thats one site i'm going to cross off my list then.

[QUOTE=TaiwanesePrick;45219300]dont forget tai only bought from them because they were the exclusive US distributor of the SRC T91[/QUOTE] BTW, how is SRC quality compared to other brands

Wanna switch to midcaps, what magpouch can hold multiple m4 magazines and is good for quick grabbing? obviously I live in the EU so EU links only tyvm

I haven't been in here forever. I do have a question, however! What is a good, cheap smart charger? I thought of the IMax B6, but I figured you guys would have better info than random google search.

[QUOTE=theryan11;45220723]BTW, how is SRC quality compared to other brands[/QUOTE] I bought an SRC delta ring for my M4 that was really nice. Of course that says nothing about their guns or overall quality, I may have just gotten lucky, so take this with a grain of salt.

Anyone have some recommended patch websites? Patchwhores Anonymous represent

[QUOTE=theryan11;45220723]BTW, how is SRC quality compared to other brands[/QUOTE] Better than Dboys, that's for sure. My T91 lasted a good four years before it needed its internals to be swapped out, and on top of that it was probably sitting in the airsplat warehouse for four-five years before I bought it. Sooooooooooo

[QUOTE=Recurracy;45237078]Wanna switch to midcaps, what magpouch can hold multiple m4 magazines and is good for quick grabbing? obviously I live in the EU so EU links only tyvm[/QUOTE] I quite like fastmags, but they're not for everyone. You can pick up some decent clones if you don't want to fork out for proper ITW ones.

[t]http://i.imgur.com/PQ0vmrz.jpg[/t] Is there a way that I can get the patch that Apoctank has on his gun? I really like it and would like to have one for my loadout somewhere.

i feel like i should've got commission for that design c: i think codemonkey has the remainder of the patches, he can hook you up if he's got any left