• The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?"
    8,092 replies, posted
[QUOTE=Dominic0904;45357890]I asked earlier about a good starting pistol and get the nice recommendation of the TM 4.3 Hi-Capa. I just wanted to ask this to double check, wouldn't the 5.1 version be a better choice? The small bit of reading I did into them (aka google TM 4.3 vs 5.1) and a lot of people are saying get the 5.1 because of a number of reasons you lot most likely already know. So I just wanted to ask your opinions on the matter. Also it's slightly cheaper than the 4.3 but only by a small amount. Thanks in advance.[/QUOTE]The 4.3 is more compact than the 5.1, if you have smaller hands it might be easier to manipulate.
It won't. The frame is the same size on both pistols, so hand size shouldn't be a determining factor for one vs the other.
So when I was browsing echigoya guns website, it had all the normal categories, AEGs, GBBs, snipers, shotguns, etc. But there was also a category labeled "California and nearby states", where everything was $20-$50 more expensive. If I'm shipping to the US do I need to use this section, or can I buy one of the cheaper regular ones? Regular, $459: [url]http://echigoya-guns.com/guns/index.php?route=product/product&path=36_35&product_id=446[/url] CA, $504: [url]http://echigoya-guns.com/guns/index.php?route=product/product&path=71_70&product_id=152[/url]
[QUOTE=Malikyte;45360788]It won't. The frame is the same size on both pistols, so hand size shouldn't be a determining factor for one vs the other.[/QUOTE] So would you say that I might as well go for the 5.1? Since the slightly increased barrel size would increase accuracy by however much and there's a very small price difference between the two?
[QUOTE=Dominic0904;45361061]So would you say that I might as well go for the 5.1? Since the slightly increased barrel size would increase accuracy by however much and there's a very small price difference between the two?[/QUOTE] I'd say that unless you specifically want the shorter barrel, the difference is negligible. Just get whichever one you think looks best out of the box.
I've got a potential opportunity to get a tm mp7 aep for 100 dollars with some mags. Good idea or should I wait and pick up a kwa gbb mp7?
I loved my old Marui MP7, and 100 bucks is a good price for it. If you want it, go for it.
[QUOTE=Malikyte;45361589]I loved my old Marui MP7, and 100 bucks is a good price for it. If you want it, go for it.[/QUOTE] Thanks for your opinion
oh man. a tm MP7? for $100? you better get that right now. if you dont like it you can resell it on a p* forum for like $200+ depending on how many mags and battery plus condition.
Are CYMA M14's and AK's any good? That Hong Kong site's packing loads of CYMA shit for cheapo and I still haven't bought an M4 Blowback wood/metal 47 has caught my eye.
[QUOTE=Holt!;45361763]Are CYMA M14's and AK's any good?[/QUOTE] CYMAs are generally regarded as the best AKs for the price. And my CYMA SOCOM16 (which is just a shorter M14) was good. Externals were ok but it performed excellent stock. Don't get a blowback AK (if you can't disable it easily) though. Most electric blowback systems in general are really lame and gimmicky.
[QUOTE=Heldure;45361740]oh man. a tm MP7? for $100? you better get that right now. if you dont like it you can resell it on a p* forum for like $200+ depending on how many mags and battery plus condition.[/QUOTE] Do they use those ridiculous micro batteries?
[QUOTE=Zero_X54321;45361809]Do they use those ridiculous micro batteries?[/QUOTE] The 7.2v ones? Yes but you can buy an adaptor for like $15 (someone correct me if i'm wrong) that lets it use any airsoft battery
[QUOTE=apoctank;45362106]The 7.2v ones? Yes but you can buy an adaptor for like $15 (someone correct me if i'm wrong) that lets it use any airsoft battery[/QUOTE] Would it be a bad Idea to do so and use a 7.4 lipo or something in the gun somehow (I realize now that there's not a lot of real-estate for batteries inside the gun)
Plenty of people do that
Feels like I'm spamming this thread with my anti-notrabies MP5k build. I found this: [url]http://www.hk-parts.com/airsoft/eshop/index.php/king-arms-cqb-type-silencer-for-mp5k-pdw.html[/url] So if I'm correct, this means I don't need a special inverted 14mm+ to 14mm- adapter and it'll just screw right in? Anyone bought from hk-parts.com? Reputable? I can get it for $30 shipped which is the lowest I've found so far.
Thats pretty neat, and it seems like it should work
[QUOTE=Herfjotur;45363047]Thats pretty neat, and it seems like it should work[/QUOTE] Yeah it forgoes the adapter so that's one less point of breakage. Plus it has HK trades so that's cool too. So I could theoretically fit a 110+225=335mm inner barrel. Do they make TBBs in that length (or slightly shorter)?
[QUOTE=TerrorShield;45363103]Yeah it forgoes the adapter so that's one less point of breakage. Plus it has HK trades so that's cool too. So I could theoretically fit a 110+225=335mm inner barrel. Do they make TBBs in that length (or slightly shorter)?[/QUOTE] I may get that as well, becuase I've been wanting to do a build similar to what you were wanting to do with my MP5k PDW, except modding a MP5 sliding stock instead of a ump stock
[QUOTE=TerrorShield;45363103]Yeah it forgoes the adapter so that's one less point of breakage. Plus it has HK trades so that's cool too. So I could theoretically fit a 110+225=335mm inner barrel. Do they make TBBs in that length (or slightly shorter)?[/QUOTE] 300mm is a very common length, and the extra 35 of the suppressor won't be problematic
[url]http://www.ampedairsoft.com/product_p/pr-4582109580103.htm[/url] 285mm is the closest I could get. Same site as the Shredder Concave Spacer, but man $60 is a lot. Does it have to be a Prommy?
I've always been a fan of Madbull Black Pythons
Ok found the 300mm on Evike for $51 which still seems like a lot. [url]http://www.evike.com/products/24384/[/url] [editline]11th July 2014[/editline] muh automerge
[QUOTE=TerrorShield;45363218]Ok found the 300mm on Evike for $51 which still seems like a lot. [url]http://www.evike.com/products/24384/[/url] [editline]11th July 2014[/editline] muh automerge[/QUOTE] Pretty sure prommy barrels are $100 local where I live
Yeah I'm just going to get a Madbull Black Python then. $30 is more reasonable and the quality seems to be the same. Prommy Purple Bucking g2g? [img]http://i.imgur.com/ujI918J.png[/img] [editline]11th July 2014[/editline] this is the first time i've ever done anything internal related so sorry for all the questions
just be prepared for the hopup and inner barrel to be outrageously annoying to get to you have to completely take it apart to get to take out the barrel.
[QUOTE=TerrorShield;45363620]Yeah I'm just going to get a Madbull Black Python then. $30 is more reasonable and the quality seems to be the same. Prommy Purple Bucking g2g? [img]http://i.imgur.com/ujI918J.png[/img] [editline]11th July 2014[/editline] this is the first time i've ever done anything internal related so sorry for all the questions[/QUOTE] I have the prommy bucking, it hasnt really improved my range too much but it is very consistent. I am using a lonex hop up with prommy bucking and nub but stock shit CA barrel. I get around 200ft with my CA piece of shit.
TD short or KAC grip for Mk18?
[QUOTE=Wulfram;45363631]just be prepared for the hopup and inner barrel to be outrageously annoying to get to you have to completely take it apart to get to take out the barrel.[/QUOTE] Aw. Should I look into getting it installed by a tech? I have never even taken apart an AEG and I sure don't want to screw everything up. [editline]11th July 2014[/editline] [QUOTE=Herfjotur;45363699]TD short or KAC grip for Mk18?[/QUOTE] I'd go with the KAC. Little longer but in my opinion it balances out the rifle more.
[QUOTE=Wulfram;45363121]I may get that as well, becuase I've been wanting to do a build similar to what you were wanting to do with my MP5k PDW, except modding a MP5 sliding stock instead of a ump stock[/QUOTE] And suddenly everyone is making anti-notrabies MP5s :v:
Sorry, you need to Log In to post a reply to this thread.