The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

WELL MP7A1 (80 euros). Yes or hell no? If else any good MP7 AEG's on the market?

I love the descriptions on ehobby's site "No more Plastic Bullet shaking which essential for intrusion during airsoft combat situation"

We've had this discussion before, but I've never needed to pay attention to it now: What holster does a TM Hi-Capa 5.1 work best in? I've heard of people modifying 1911 SERPAs but I'd like your guys' opinion first. I'd possible like to mount it on the chest area of an RRV. [editline]13th July 2014[/editline] also i need a 5.1 rear sight, preferably from a US retailer

I believe Wulf took advantage of his boxy trigger guard and used a knockoff crye gunclip

I was able to use the gunclip because the Kp-08 has a rounded triggerguard, dunno if it would work with the normal squared off one on most hicapas

Oh for fu... The sites now got CYMA RPK's and SVD's in stock. SO MANY CHOICES They any good too?

cyma rpk is p great

pot metal in all the wrong places doe my stock tang screw hole stripped itself after removing the stock twice, once to refinish and another to rewire and i don't think the disintegrating charging handle or the amazing vanishing rear sight even need to be mentioned at this point

Get Malikytes LCT RPK.

he's in britland tho

Since when?

Shit. [editline]14th July 2014[/editline] [QUOTE=Malikyte;45390052]Since when?[/QUOTE] He was talking about Holt.

[QUOTE=Malikyte;45390052]Since when?[/QUOTE] i mean holt

Oh, derp. [editline]14th July 2014[/editline] I mean, I'm willing to ship to Britannia as long as he's allowed to have it.

CM047 series. Yes or avoid? Helping a friend. [editline]14th July 2014[/editline] Please don't just rate disagree, give me some insight.

[QUOTE=GREN EYGS N HAM;45390692]CM047 series. Yes or avoid? Helping a friend. [editline]14th July 2014[/editline] Please don't just rate disagree, give me some insight.[/QUOTE] tm style avoid [editline]14th July 2014[/editline] seriously it is probably the best cyma tm-syle clone but he is better off with a 048 or a dboys full steel, or even a lct

[QUOTE=GREN EYGS N HAM;45390692]CM047 series. Yes or avoid? Helping a friend. [editline]14th July 2014[/editline] Please don't just rate disagree, give me some insight.[/QUOTE] It's a CYMA. Enough said really. It's not bad if that's all he can afford, but he can do better if he just saves up a little extra.

He's on a limited budget though but I'll do my best and nag on him to save his money for something better.

If he can save up for one, you really can't go wrong with an LCT. Their NV models are steering away from the old TM body style so you can fit a lot of real-steel parts on them, if he's into that kind of thing. Even if he isn't they're still rock-solid and perform well out of the box, and only RealSword has nicer externals than LCT (unfortunately RealSword only makes a couple of different models though)

dboys fs aren't as bad as everybody says just get a better gb shell/drop in gb is what i would say [editline]14th July 2014[/editline] i'm the dboys lorax [editline]14th July 2014[/editline] "Malikyte!" he said like a canadian geeze I am the onion, and i speak for boyi's

[url]http://www.ebairsoft.com/iron-airsoft-m320a1-40mm-grenade-launcher-p-7209.html[/url] Is customs gonna troll me?

I doubt it. I've seen a few Iron M320s Stateside before, and most retailers from overseas put tape or putty over the trademarks to get them through customs anyway. EDIT: Nevermind, just read the description on the link, the pictures lie. This one doesn't have trademarks anyway. You should be fine. [editline]14th July 2014[/editline] [QUOTE=upsideonion;45391374]dboys fs aren't as bad as everybody says just get a better gb shell/drop in gb is what i would say [editline]14th July 2014[/editline] i'm the dboys lorax [editline]14th July 2014[/editline] "Malikyte!" he said like a canadian geeze I am the onion, and i speak for boyi's[/QUOTE] Also, I don't really have anything against DBoys specifically. I've owned a couple, and would take a full-steel model DBoys over most CYMAs.

[QUOTE=Malikyte;45393336] Also, I don't really have anything against DBoys specifically. I've owned a couple, and would take a full-steel model DBoys over most CYMAs.[/QUOTE] I think most people consider Dboys steel AK's to be better than their CYMA counterparts.

dboys full metal < cyma < dboys full steel < E&L (????) < LCT/VFC/RS

[QUOTE=Malikyte;45393336]I doubt it. I've seen a few Iron M320s Stateside before, and most retailers from overseas put tape or putty over the trademarks to get them through customs anyway. EDIT: Nevermind, just read the description on the link, the pictures lie. This one doesn't have trademarks anyway. You should be fine. [editline]14th July 2014[/editline] Also, I don't really have anything against DBoys specifically. I've owned a couple, and would take a full-steel model DBoys over most CYMAs.[/QUOTE] Thanks, My team wants me to be grenadier and I need a grenade launcher and my m203 is beat to fuck.

I was browsing for pistol parts and I noticed a Glock 18c nozzle return spring guide. My Glock 19 has a nozzle return spring, but there's no guide. It just free floats within the blowback unit. Did I fuck up and lose it along the way somewhere, or is it not supposed to have one?

The G&P Stoner 63 is good, right? Thinking about buying one to get into being a machine gunner.

If I ever decide to go the support gunner route, the G&P Stoner 63 would be at the top of my list. I received many recommendations when I was toying around with the idea before

How Reputable is ehobbyasia when it comes to ordering mags? I don't have any money just yet to get those magazines that were recommended to me last page, and I usually prefer to get closer to local stuff, but I might have to order from EHA.

[QUOTE=Zero_X54321;45394531]How Reputable is ehobbyasia when it comes to ordering mags? I don't have any money just yet to get those magazines that were recommended to me last page, and I usually prefer to get closer to local stuff, but I might have to order from EHA.[/QUOTE] Never really heard of any issues, and I've never had any issues, myself.