The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

Integrated>Arc'Teryx>nothing

What do you guys use to write the blue numbers on your guns and optics?

Paint markers. Don't over do it. White, Blue, and Red are acceptable. [editline]31st July 2014[/editline] [url]http://www.ebay.com/itm/Universal-Whatproof-Permanent-Paint-Marker-Pen-Car-Tyre-Metal-Rubber-Pleastic-US-/291122329271?pt=LH_DefaultDomain_0&var=590273943623&hash=item43c83e36b7[/url]

Oi what about orange!

If you've seen it on an issued gun, then sure.

[QUOTE=Tophat;45551457]With Condor knee pads is it better to have the little clips/buckles on the outside or the inside of your legs?[/QUOTE] I use those kind of knee pads and I have the class on the inside. I also cross the straps. Never had any issues with then at all

[QUOTE=arthuro12;45557328]Oi what about orange![/QUOTE] I like to use neon pink nail polish

[QUOTE=Tophat;45556732]What would you rather have? Neoprene knee pads?[/QUOTE] What Herf said. Go for pants with built in kneepads or get Arc'Teyx. Most of the other designs have a way of coming off really easy unless you have big legs. After I switched to integrated kneepads I never went back.

Plus I feel like integrated kneepads don't heat up or restrict your freedom of motion as much as external pads

So i bought a complete upper. Can i mod it to fit my current receiver? Edit: current lower is classic army, guy didnt say what brand the upper was but i dont really care i just got it for the outer barrel and charging handle and RIS

Depends what brand the upper is and what brand the gun you're trying to fit it to is.

Pics help

[QUOTE=theryan11;45559526]So i bought a complete upper. Can i mod it to fit my current receiver? Edit: current lower is classic army, guy didnt say what brand the upper was but i dont really care i just got it for the outer barrel and charging handle and RIS[/QUOTE] You can usually make it work with some time using a file and a dremel. I fit a WAY off-spec polymer G&G upper to a metal CA lower by filing the rear of the upper and dremeling the inside of the front pin slots on both halves.

On second thoughts, I've seen the G&G CM16 Raider and I've kind of fallen in love with it. Anything I should know?

Anyone know if someone has made a custom high power 40mm grenade shell? I picked up two of the Madbull king grenades and plan on abusing it with high PSI on CO2. Apparently you can get it to hit over 150ft, but would like to see something even more powerful!

[QUOTE=Heldure;45546128]You'll need to find someone to install the rhop because you'll want it shaved to the barrel and adjusted for whatever weight bb you'll be shooting. I say .28s because you can buy them for relatively cheap in bottles of 5k instead of buying .30s in bags of 2700 or so for more than the 5k bottle.[/QUOTE] All right well after doing my research ive been able to find the padbull percision barrel and i think i should be able to find this r-hop thing (my friend told me it acts as a second hop up putting more spin on the bb to get better accuracy) so thank you very much

[QUOTE=3bwii;45563202]All right well after doing my research ive been able to find the padbull percision barrel and i think i should be able to find this r-hop thing (my friend told me it acts as a second hop up putting more spin on the bb to get better accuracy) so thank you very much[/QUOTE] it replaces your hopup. you only need a bucking that has the bump shaved off. it provides airseal so you dont blow your rhop patch out. the madbull $30 tbb is pretty good for what you're wanting to do. I would ask locally to see if anyone can do an install. if they charge more than $30 to install it then they're full of crap.

[t]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10560290_10152601854733497_5152019178149089628_o.jpg[/t] is the finish on all lct aks as good as this

Woops no read it wrong im dumb snip snip snip

[QUOTE=Heldure;45563232]it replaces your hopup. you only need a bucking that has the bump shaved off. it provides airseal so you dont blow your rhop patch out. the madbull $30 tbb is pretty good for what you're wanting to do. I would ask locally to see if anyone can do an install. if they charge more than $30 to install it then they're full of crap.[/QUOTE] Allright well my dad told me that I can't get the inner barrel because I "don't need it" he also says I would just break the gun so I'm curious is it really that hard to install ( also he says that the echo 1 xcr-c comes with a tight bore is that true?)

I highly doubt echo none guns come with tightbores. 6.03 is hardly tight. I used a 6.01 with biovals just fine. I cant help you with your dad thing though.

[QUOTE=3bwii;45566638]Allright well my dad told me that I can't get the inner barrel because I "don't need it" he also says I would just break the gun so I'm curious is it really that hard to install ( also he says that the echo 1 xcr-c comes with a tight bore is that true?)[/QUOTE] googling that gun looks like it should pull apart similarly to an M4. It's super simple to swap out inner barrels.

[QUOTE=Heldure;45566723]I highly doubt echo none guns come with tightbores. 6.03 is hardly tight. I used a 6.01 with biovals just fine. I cant help you with your dad thing though.[/QUOTE] Well he'll believe it if he reads it in this thread and i explain that you guys are veterans... [editline]1st August 2014[/editline] [QUOTE=Heldure;45566723]I highly doubt echo none guns come with tightbores. 6.03 is hardly tight. I used a 6.01 with biovals just fine. I cant help you with your dad thing though.[/QUOTE] He also believe that echo 1 manufactures most of their guns :v:

Heldure: bbwarz veteran well he doesnt really know about airsoft guns it seem. either way if you could find someone to install an rhop even into a stock 6.03 you would be better off with your range than you would now. just remember that you will want to shoot heavier bbs.

Echo None manufactures just about none of their guns. Their guns come with shitty 6.08+ brass barrels which will shoot out after some time, which is why a stainless or aluminum tight bore is most recommended. Barrels are easy to swap, and anyone can do it. If you can't swap an inner barrel on your own.... I don't know how you're reading this. The only things you can POSSIBLY break are your hop up unit ($10 OEM ones), or your air nozzle ($8 for performance double o-ring nozzles). The easiest way to mess up installing a barrel is ripping your bucking (free-$10).

I installed my hop up and barell without anyones help, other then youtube. Im only 14. The thing you gotta make sure of is not to rip your bucking, and if the bucking comes out with the barrel, put it in back the right way, or else your hop wont work right. Also, let me know how you like your XCR. My less fortunate friend wants a non m4 that still takes stanag mags but he cant afford a VFC. I dont want him to make a bad purchase.

I need some new 0.2s, what's the best brand of BBs out there?

I would argue that biovals are pretty nice. getting into "best bb" is like "best manufacturer" the answer changes depending on what you're using. I know DGs dont like anything not Bioval althought those CNCd BBBastard bbs would be cool I dont think you're looking at buying bags of 4 or whatever they sell them in. also at .20 I would just get a bag of whatever. EF or whatever everyone else is using that isnt too expensive.

[QUOTE=theryan11;45566965]I installed my hop up and barell without anyones help, other then youtube. Im only 14. The thing you gotta make sure of is not to rip your bucking, and if the bucking comes out with the barrel, put it in back the right way, or else your hop wont work right. well so far im enjoying it very much so over my clearsoft cybergun thompson yeah its definetley great begginer gun Also, let me know how you like your XCR. My less fortunate friend wants a non m4 that still takes stanag mags but he cant afford a VFC. I dont want him to make a bad purchase.[/QUOTE] well so far im enjoying it very much so over my clearsoft cybergun thompson yeah its definetley great begginer gun EDIT: sorry i put my answer as the second paragraph in the quote

Biovals aren't what they used to be. They're not nearly as good.