The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

What's the best way for my to go about increasing the range on my 249? We've already put a G&G green bucking in it and are experimenting with different pen tubes to use for the nub. What diameter barrel should I use?

6.03 Madbull or 6.05 Prommy, or 6.03 Prommy if you want to drop the cash.

Used MC JPC for $225 or New CB for $285? I'm thinking MC, even though I'll have to buy pouches and already have an MC carrier. Its much cheaper, more versatile from an impression stand point, and leaves me plenty of money to buy plates. The downside is it won't be as hella cool, and I won't be able to rock PreMSA coyote pouches on it.

anyone know where I can get a wood vsr-10 stock that doesnt cost more than twice what mine cost? I want to have a wood stock for STALKER/post-apoc style kits

[QUOTE=Wulfram;45761054]anyone know where I can get a wood vsr-10 stock that doesnt cost more than twice what mine cost? I want to have a wood stock for STALKER/post-apoc style kits[/QUOTE] [url]http://www.airsoftglobal.com/shop/index.php?main_page=product_info&products_id=15925[/url] The only one I could find, everything else was fake wood (assuming you want to refinish it obviously).

thats still a bit more than I wanted to spend. I guess I'll just keep an eye out for a used one

approximately how long will an 800mAh 20-30C LiPo last? The 1300 mAh one that I got is too large to fit in the battery box I bought. fortunately it will still fit with the plans I have for my other gun.

[QUOTE=Zero_X54321;45761475]approximately how long will an 800mAh 20-30C LiPo last? The 1300 mAh one that I got is too large to fit in the battery box I bought. fortunately it will still fit with the plans I have for my other gun.[/QUOTE] It is really hard to give approximates on lipo duration imo. I use something like a 450mah in my SR-3, and while it still hasn't gotten heavily used its still good for a few hundred rounds. Just remember, as soon as you detect your rof/trigger response slowing its time to immediately change batteries or you risk permanently depleting the lipo.

-snip-

about to buy this, would prefer to do so tonight. can it be found anywhere else for cheaper? [IMG]http://puu.sh/b51pI/27901725db.jpg[/IMG]

[QUOTE=Heldure;45780415]about to buy this, would prefer to do so tonight. can it be found anywhere else for cheaper? [IMG]http://puu.sh/b51pI/27901725db.jpg[/IMG][/QUOTE] That's about as low as it goes short of used sales. Just checking, you have done the extensive research into these, right?

yeah, prepared to buy all sorts of aftermarket parts and cnc'd parts as well. I just need the internals. "aftermarket" = custom made until WE or someone else comes out with a semi automatic shotgun this is really nice.

So opinions on this? [url]http://shop.ehobbyasia.com/other-gun/gas-blow-black-rifle/g-p/g-p-woc-m4-cqb-skull-frog-gbb-rifle.html#.U_pCGfldVIY[/url] or should I just get a WE? [url]http://www.evike.com/products/37271/[/url]

Don't get a "skull frog" receiver. As for WOCs, I heard they're pretty good, but I'm sure someone with experience can chime in.

[QUOTE=Zerokateo;45787781]So opinions on this? [url]http://shop.ehobbyasia.com/other-gun/gas-blow-black-rifle/g-p/g-p-woc-m4-cqb-skull-frog-gbb-rifle.html#.U_pCGfldVIY[/url] or should I just get a WE? [url]http://www.evike.com/products/37271/[/url][/QUOTE] I would definitely just get the WE

Does anyone know where I can find a Browning Hi-Power or a Makarov GBB?

[QUOTE=StolenArc;45789618]Does anyone know where I can find a Browning Hi-Power or a Makarov GBB?[/QUOTE] WE makes a hi power. iirc, the only makarov released is a NBB co2 pistol though I think I saw a retail modification to make it blowback.

Thanks, does anyone know where I can find a wood conversion kit for a cyma cm028? EDIT: Nvm, is it possible to stain the fake wood on it to look older and worn down?

[QUOTE=StolenArc;45790144]Thanks, does anyone know where I can find a wood conversion kit for a cyma cm028? EDIT: Nvm, is it possible to stain the fake wood on it to look older and worn down?[/QUOTE] [url]http://www.red-alliance.net/articles/customization/furniture.html[/url]

can I get an od gorka from anywhere for cheaper than this? [url]http://www.soviet-propaganda.com/index.php?main_page=product_info&products_id=208[/url] even just the top.

[QUOTE=Wulfram;45790386]can I get an od gorka from anywhere for cheaper than this? [url]http://www.soviet-propaganda.com/index.php?main_page=product_info&products_id=208[/url] even just the top.[/QUOTE] profarmy.ru got my Bars Gorka-3 for $70 + shipping iirc, just be prepared for the horrors of ruspost.

[QUOTE=GREN EYGS N HAM;45790326][url]http://www.red-alliance.net/articles/customization/furniture.html[/url][/QUOTE] Thanks, can't wait till I get my CM028 ;3

Hey Guys, I was hoping to get a SMG this fall for the CQB place I go to, what would some recommendations for Canada be?

[QUOTE=LurkietheLurker;45805205]Hey Guys, I was hoping to get a SMG this fall for the CQB place I go to, what would some recommendations for Canada be?[/QUOTE] You could pick up an MP5K and throw a Hi-torque in it and other things that help trigger response. MP7's are popular right now, MP9 if you want to be different.

I guess to expand on my question, who would be a good manufacturer to look for and what are the thoughts on full size MP5s.

G&G MP5 gud gun

Is the JG MP5A4 any good?

[QUOTE=StolenArc;45810158]Is the JG MP5A4 any good?[/QUOTE] If you want good, go G&G. If you want cheap, go JG/CYMA. They're decent, but most likely won't hold out very long.

My JG MP5A4 broke a while ago. Gearbox trigger stopper fell off when (I think) I may have placed it a little too roughly into the back of a school bus. Until then, however, it kicked serious ass. [editline]27th August 2014[/editline] Moral of the story is go for it, but be gentle.

Did... Did you take it to school?