The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

Would a Chicom be considered as webbing equipment?

No, as they have no webbing.

Nvm, just found some old Chinese webbing equipment, probably going to get that and a surplus Yugoslav rucksack

Yo guys so my gun is STILL busted and i was wondering what type of motor i should buy for my xcr-c

Can't go wrong with Lonex A2

SHS high torque is a comparable option for (I believe) 2/3 the price

Lonex or Nonex

the JG blue in my G&G AR has been going strong for 2 years now

JG blue is also good. Had one in the SR.

OK thanks guys I'll get the SHS high torque one more thing can someone show me where i can get trigger contacts/triggers + wiring for an xcr-c (I'd prefer you link me to the product) K thanks. [editline]26th September 2014[/editline] Yo guys my dad is looking for a vest/plate carrier using ak mags for under 100 dollars he wants it complete with mag pouches and not bare bones. Some thing that looks like [URL="http://www.torontoairsoft.com/Lancer-Tactical-CA-304K-Tactical-Plate-Carrier--TAN_p_2881.html"]this[/URL] (But I advised against buying this knowing fp wouldnt let me hear the ned of it for buying Lancer Tactical.) So any suggestions would be great. Thanks.

Does anybody know of any decent goggles I can get that appear similar to the sand goggles that Big Boss wears in MGSV? Pic below for reference: [img]https://nekkedsnake.files.wordpress.com/2014/06/wpid-mgsv-the-phantom-pain-art-venom.jpg?w=593[/img] Preferably I'm looking for something within a decent price range, close to £30 would be nice.

The split lense makes me want to guess something along the lines of aviator or motorcycle goggles, but these are more than likely just made up, and more importantly you need to be 100% sure whatever you're getting is properly bb proof.

[QUOTE=notrabies;46093584]but these are more than likely just made up.[/QUOTE] like goddamn everything in gz/tpp [editline]27th September 2014[/editline] kojima why

Anyone know the max CO2 PSI you can put into the TAG shell launcher before it turns into a pipe bomb?

[QUOTE=DigitalRicky;46093935]Anyone know the max CO2 PSI you can put into the TAG shell launcher before it turns into a pipe bomb?[/QUOTE] I would start by figuring out the standard PSI achievable from green gas and go from there.

Ah well they responded to my message and its 500PSI apparently. Higher than I expected. Considering Propane is like 100PSI I think that's a huge jump!

[QUOTE=notrabies;46093584]The split lense makes me want to guess something along the lines of aviator or motorcycle goggles, but these are more than likely just made up, and more importantly you need to be 100% sure whatever you're getting is properly bb proof.[/QUOTE] Hmm. Any other suggestions, then? Really trying to find something with a price range close to £30.

[QUOTE=DigitalRicky;46095858]Ah well they responded to my message and its 500PSI apparently. Higher than I expected. Considering Propane is like 100PSI I think that's a huge jump![/QUOTE] It will be a difference but not as much as you think. With propane, you're filling with liquid at the vapor pressure. With CO2, unless it's at the vapor pressure of 800-some PSI you'll be filling with gaseous CO2. Even though the liquid propane is at a lower pressure, when the grenade is fired and the pressure starts to drop, it boils off to maintain that 100-some PSI until it has all converted to gas. CO2 will have a much higher initial pressure, but the pressure drops immediately. This happens way too fast to observe in practice, but it means that propane delivers a lot more power than the pressure alone would suggest and you need to get above 300-400 PSI on CO2 to start noticing an improvement.

What are peoples opinions on angled ironsights

[img]https://i.chzbgr.com/maxW500/292139776/h3A25ADAB/[/img] this is my opinion

Same, can't see the appeal of them but my mate wants some because hes gangsta [editline]29th September 2014[/editline] thats a complete lie I wanted to see what other peoples opinions were on them cause I want a set of ironsights as well as my red dot

Get flip ups. Canted irons don't work well in airsoft because of how hop up works. Tilt your gun 45 degrees and suddenly every shot hooks up and left instead of going straight.

[QUOTE=Herfjotur;46107136]Canted irons don't work well in airsoft because of how hop up works.[/QUOTE] 100% this. Also canted iron sights on real guns are pretty fucking stupid since the Docter sight is better in pretty much every way and won't snag on gear/require you to fire your weapon from a tilt.

I have seen the error of my ways. [editline]29th September 2014[/editline] You have saved me from myself

I don't think the houp thing is really that big of an issue. If you're using your canted sights in the first place the target is gonna be very close, probably close enough to where the hopup won't have time to affect the BB enough to throw it off course. Not that I'm saying I like canted sights, just my $0.02 on the hopup thing

Could someone recommend me some internal upgrades for my Combat Machine? I'd like to be more accurate and have a higher FPS. what do i need? [editline]29th September 2014[/editline] I have a 6.03 tightbore coming in the mail so thats good to go, but what can i change in my gearbox?

[QUOTE=7 Layer Dip;46110825]Could someone recommend me some internal upgrades for my Combat Machine? I'd like to be more accurate and have a higher FPS. what do i need? [editline]29th September 2014[/editline] I have a 6.03 tightbore coming in the mail so thats good to go, but what can i change in my gearbox?[/QUOTE] Be careful with putting any spring higher then an m120 in, in my experiances G&G gearboxes (V2 at least) is that they are brittle and can crack.

Throw in a M110 spring, a stainless steel 6.03, a new hop-up and bucking and you'll be set. That's assuming you don't want to change the gearbox too much. If you do, a new piston and cylinder will help compression. Might want to reshim the gears while you're at it. I did that to my 4 year old G&G MP5 and it's shooting better than most people's brand new expensive stock guns so I think I done good. Also use 0.28g bbs

Don't replace your bucking. G&G Green is considered one of the best.

[QUOTE=GordonZombie;46095937]Hmm. Any other suggestions, then? Really trying to find something with a price range close to £30.[/QUOTE] Just reposting this in case anyone has a decent suggestion.