The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

[QUOTE=apoctank;46687873]Assuming it's one of those Condor battle belts, you need a smaller normal belt to put inside of it so you can actually secure it onto you. Most of the belt setups in the loadout thread are things like premade chest rigs, or ALICE/M1956 rigs which aren't MOLLE compatible. You wear a backpack with a battle belt, but you can't really attach one to it without some modification[/QUOTE] It came with the inner belt so I can wear it, but I do want suspenders with that back panel so I can attach MORE things

Conder makes a set of suspenders that has some rear MOLLE on it

Does anyone here know if any company makes milled AK receivers that fit VFC style AK's? Im looking for an AKS body for my AR-SF project.

My classic army is less efficient then a hummer. What can I do to make my gun more power efficient, it takes 3-4 NiMH batteries (9.6 crane stock)to last me an 8 hour game day, if I stick to semi only I can use 2 NiMHs in one day. My top tech G&G 416 only uses 1 battery a day and I can spray as I please. Should I switch to lipo? Would getting a lonex motor help? The stock classic army doesn't even magnetize to anything. Help pls

Is there a way to tell what version of the KJW 226 you have? a friend of mine has one and has two mags for it, and neither of them feed due to VERY Slight misalignment with the feed lip, so he's guessing that he has the wrong version of the gun.

What would be a good starter gun? Christmas is around the corner so I figured I'd ask for one since I've been meaning to get into Airsoft with some friends for a while now.

[QUOTE=Exigent;46690932]What would be a good starter gun? Christmas is around the corner so I figured I'd ask for one since I've been meaning to get into Airsoft with some friends for a while now.[/QUOTE] G&G Combat Machine for AR's, CYMA 040,045,048 or DBoys models for AK's, Galaxy for MP5K, JG for MP5's, and if you want something else, you'll have to ask. The Combat Machine is the go-to beginner gun. Light weight, indestructable, and with decent performance. The AK's are heavier and will have a nicer external feel, especially with wood, but they're a bit more breakable than the polymer Combat Machines unless you get a steel model. Pot metal can be very brittle. The Galaxy MP5K is a legend in our group, in that it has what is probably the best performance you could ask for in such a small package. The stock gearbox, along with some simple, beginner level hop up modifications, can make the Galaxy match any gun in range. The shell is ABS, though, so it's not to be abused. Also harder to find now. The JG MP5's are also ABS, but JG produces quite the reliable gearbox. Not the highest quality, or the highest performance, but if you like MP5's, theres nothing wrong with them. They'll run forever and just keep going. [editline]11th December 2014[/editline] When picking a gun, take in to consideration the size, shape, and capacity of magazines. You'll have to carry them somehow, and with lower capacity, you have to carry more.

Can confirm that Combat machines are fucking indestructable. Dropped an original polymer receiver out a second floor window and it only scratched it.

If you can find a JG G36 those things are indestructible

[QUOTE=apoctank;46691529]If you can find a JG G36 those things are indestructible[/QUOTE] Until you put a Lonex A2 in it. RIP.

Also with Cymas the shoot pretty damn hot for most fields, mine is near 450 and the RPS is a bit low. Definitely going to ahve to put a new spring in there Hey, is CA alright? Looking around for more and more alternate items. Seems $250 is about the max I can go, and thats if the item is $250 and can be used with the 25% off code

[QUOTE=apoctank;46691529]If you can find a JG G36 those things are indestructible[/QUOTE] mine wasnt

[QUOTE=paindoc;46692211]Also with Cymas the shoot pretty damn hot for most fields, mine is near 450 and the RPS is a bit low. Definitely going to ahve to put a new spring in there Hey, is CA alright? Looking around for more and more alternate items. Seems $250 is about the max I can go, and thats if the item is $250 and can be used with the 25% off code[/QUOTE] I'd rather have a cardboard gun that shoots paper bullets than a Classic Army, it would shoot further, last longer, and be less proprietary.

I've been craving M1 Garands recently. Marushin M1 Garand with 6 clips + Leather sling for £300. Should I get. I know the ICS one is probably higher quality but dat ejecting clip. [editline]11th December 2014[/editline] O fuck I just read up on the quality of the marushin one. Is not good.

[QUOTE=Holt!;46694049]I've been craving M1 Garands recently. Marushin M1 Garand with 6 clips + Leather sling for £300. Should I get. I know the ICS one is probably higher quality but dat ejecting clip. [editline]11th December 2014[/editline] O fuck I just read up on the quality of the marushin one. Is not good.[/QUOTE] Don't believe it, there are about a dozen different Marushin Garands, and they vary quite a bit in quality. Look for the specific type and make sure to research that one.

I have a kwa glock 18c which was given to me as it's broken loads of bits are missing but tye parts diagrams don't makr a lot of sense tbh I've got it to fire full auto but now I've broken something else and it fires one as you cock it and the rest don't go in. The blowback cylinder doesn't seem to go back, how does it work? in semi auto it fires 1 but it doesn't reset, you have to pull the slide back again What should I be looking at

So if I get this: [url]http://www.amazon.com/Airsoft-Machine-High-Performance-Gearbox-Integrated/dp/B005CBQISA[/url] What else do I need to buy with it?

a battery and charger, and some decent quality bb's. You may be able to get it cheaper, or with the battery and charger included, from an actual airsoft website. Evike also has a deal to get an extra magazine for $5 with the purchase of G&G guns IIRC. [editline]12th December 2014[/editline] actually, two extra magazines for $5 [editline]12th December 2014[/editline] [IMG]http://i.gyazo.com/4b9c9f01f5ab885c2a3480b7c14763b7.png[/IMG] [editline]12th December 2014[/editline] coupon code FREESHIP is exactly what it sounds like.

I remember hearing that P226 mags from some company had leaking problems, anyone knows what company was that?

[QUOTE=BBOOBBYY!;46699220]I remember hearing that P226 mags from some company had leaking problems, anyone knows what company was that?[/QUOTE] KJW

I had four KJW mags for my P226, every single one leaked

so if I were to wrap up the grip on my MP7 in like tape or something, what should I do that with? It's painted tan, and the paint is coming off and I don't want to repaint it. Just like, Medical tape?

Worn off paint is a good look

i used hockey tape on my shit, pretty good grip on that stuff [editline]12th December 2014[/editline] [img]http://fi.somethingawful.com/images/smilies/emot-canada.gif[/img]

[QUOTE=venom;46699945]i used hockey tape on my shit, pretty good grip on that stuff [editline]12th December 2014[/editline] [img]http://fi.somethingawful.com/images/smilies/emot-canada.gif[/img][/QUOTE] When I bought my JG M16 off a friend in high school he had wrapped the grip in hockey tape. And a good chunk of the front end of the gun because without it, the outer barrel would come apart and then there would be no pressure on the delta ring so the whole front end would just shoot off. I found that out the hard way.

hockey Tape... The roll I have has absorbed the smell of my hockey gear.

Hockey tape is my go-to for grip. The pistol grip on my G&P Stoner ended up being far too slick in the winter with gloves on, so it got wrapped.

Anyone know this camo? Looks a bit like flecktarn (excuse me if I'm horribly wrong- not quite familiar with camo names). It's used by the French, closest match I could find was some sort of Polish camo used by heavy police assault teams. Anyway, if someone could tell me the name along with a place to get it- I'll love you. EDIT: I went full retard and didn't even put in the picture. [IMG]http://camopedia.org/images/f/f0/Forad.jpg[/IMG]

Have you got a picture of it?

[url]http://www.gunstar.co.uk/ares-l85a2-airsoft-guns-for-sale-in-kent/Air-Guns/734540[/url] ARES L85A2 for £145 + £20 shipping. Any good?