The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

how do i into WE M4 GBBR? [editline]17th May 2013[/editline] like, anyone know of a good barrel/bucking for them?

[QUOTE=JimmyA;40680966]how do i into WE M4 GBBR? [editline]17th May 2013[/editline] like, anyone know of a good barrel/bucking for them?[/QUOTE] RA-Tech probably

[QUOTE=BrickMan300;40680278]will someone sell me a decent gun for $100?[/QUOTE] ????????????????????????????????????????????? [url]http://facepunch.com/showthread.php?t=1250312&p=40666509&viewfull=1#post40666509[/url]

Is it feasible to go in the woods with only a GBB 1911 and 3 mags?

[QUOTE=Rageblood;40684888]Is it feasible to go in the woods with only a GBB 1911 and 3 mags?[/QUOTE] You'll probably get outranged, outgunned, and run out of ammo.

Well dumb question ahead the different inner barrels are all the same outer diameter? And How is the G&G CM hop-up? I kinda want to increase accuracy..just later on ofc.

they should be ~8mm can't help you with the hop

TM glocks are not 1:1 scale, the slide is thicker than an actual glock. I know this from experience, I had to heat up my Serpa for my G17 to fit.

Will either of these fit a KWA NS2 CZ75? [url]http://www.wgcshop.com/wgc2008/main/product_detail1.php?search_From=searchItem&item=KSC-PT-CZ75-2V-RS&search=special&rs=CZ75&catid=&cat=[/url] [url]http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_GBB_Prime_Conversion_Kit_for_KSC_CZ75_1st_Version_System_7_Matte_Black.htm[/url]

The Prime kit will, but the other one is not for System 7, so no. [editline]18th May 2013[/editline] If you get the Prime kit I [I]highly[/I] suggest getting the RA Tech outer barrel too

Well, it'll be a long while before I buy a $460 kit for a $160 gun, I was just asking for future reference

The stuff I ordered from HK a while back is still on backorder, so I made a new list Battery: [url]http://www.hobbyking.com/hobbyking/store/__37844__Turnigy_nano_tech_1200mAh_2S_25_50C_Lipo_AIRSOFT_Pack.html[/url] Charger: [url]http://www.hobbyking.com/hobbyking/store/__18066__Turnigy_Accucel_6_50W_6A_Balancer_Charger_w_accessories_USA_Warehouse_.html[/url] Deans: [url]http://www.hobbyking.com/hobbyking/store/__30685__Nylon_T_Connectors_10_Pairs_20pc_US_Warehouse_.html[/url] Wiring (not sure about this): [url]http://www.hobbyking.com/hobbyking/store/__11851__Turnigy_Pure_Silicone_Wire_18AWG_1mtr_Red.html[/url] Shrink tubing (don't really know what to get): [url]http://www.hobbyking.com/hobbyking/store/__3831__Turnigy_3mm_Heat_Shrink_Tube_BLACK_1mtr_.html[/url] Any ideas on what else I should get? I already know a place where I can solder so I don't need tools.

you do realize that the solder tabs on deans are ~4.5mm across right [editline]18th May 2013[/editline] 16awg >>>> 18awg

So... How fucking slow are ebairsoft really?

[url]http://www.hobbyking.com/hobbyking/store/__9681__Turnigy_Pure_Silicone_Wire_16AWG_1mtr_Red.html[/url] One comment says that 16AWG wiring is 3mm so should I use this [url]http://www.hobbyking.com/hobbyking/store/__3831__Turnigy_3mm_Heat_Shrink_Tube_BLACK_1mtr_.html[/url]

[QUOTE=the_killer24;40691546]you do realize that the solder tabs on deans are ~4.5mm across right [/QUOTE] fig.1 ycheez' stupendous reading skills yeah go on right ahead buy that 3mm heat shrink i'm sure your exposed solder joints will thank you

[url]http://www.hobbyking.com/hobbyking/store/__3833__Turnigy_5mm_Heat_Shrink_Tube_BLACK_1mtr_.html[/url] for the connectors and [url]http://www.hobbyking.com/hobbyking/store/__3832__Turnigy_4mm_Heat_Shrink_Tube_BLACK_1mtr_.html[/url] for stuff like motor contacts, etc?

[QUOTE=the_killer24;40693531]fig.1 ycheez' stupendous reading skills yeah go on right ahead buy that 3mm heat shrink i'm sure your exposed solder joints will thank you[/QUOTE] or when a lipo literally explodes and either kills him, destroys everything in a 6 foot radius, or burns his house down. but hey, whatever

[QUOTE=Kweinnor;40692922]So... How fucking slow are ebairsoft really?[/QUOTE] they take about 4 weeks to ship as in get to your house

What parts on my GBB should be lubed? Got some silicone spray coming in with my ASGI order.

[QUOTE=paindoc;40694191]or when a lipo literally explodes and either kills him, destroys everything in a 6 foot radius, or burns his house down. but hey, whatever[/QUOTE] Or maybe with proper care a lipo won't blow up in my face.

knowing you nahhh

[QUOTE=Joetehpsycho;40695105]What parts on my GBB should be lubed? Got some silicone spray coming in with my ASGI order.[/QUOTE] any metal piece that moves against another metal piece. Also, your bbu

OK so now apparently because I asked a question in the questions thread because I want to get some help and guidance I'm an airsoft idiot.

[QUOTE=Wulfram;40695160]any metal piece that moves against another metal piece. Also, your bbu[/QUOTE] whatever you do don't get silicone on the bucking or it'll expand and be significantly less effective for at least a few hundred rounds

Is this any good? [url]http://www.evike.com/product_info.php?products_id=29735[/url]

magnifier cheap good pick2

if I were to get an A&K Mk43, what type of pouch or plate carrier should I get? I figure I'll just stuff 'em with BB's. The Cheaper the better, OD or CB.

[QUOTE=the_killer24;40695197]magnifier cheap good pick2[/QUOTE] give me a recommendation then

Today I took apart my g&g cm m4 to check the compression and discovered that there was none. I researched it and it seems to be a common issue. So I was wondering what parts do yall recommend to fix the issue? A new piston and cylinder? What brands?