The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

Lol ya dingus, you still have to remove the screws under the motor in the grip.

remove the plastic bit around the airnozzle [editline]20th June 2013[/editline] WORD OF WARNING WHEN PUTTING THE GEARBOX BACK IN DON'T SCREW THE PLASTIC BIT AROUND THE AIRNOZZLE BACK IN TOO TIGHT OR THE SCREW WILL RUB AGAINST THE BOTTOM OF THE NOZZLE AND SHIT WON'T WORK YO [editline]20th June 2013[/editline] not his pic it's from bingo's site [editline]20th June 2013[/editline] the screw is in the magwell if you didn't see it

no screw yo [editline]20th June 2013[/editline] omg the fucking UKARMS.COM sticker was covering the screw hole

nice1

thnxs killer

how i supose know it not ur pic :( i just want to help fisher nuffen :(

[QUOTE=Fish Muffin;41121546]VFC scar h users how do you remove the gearbox ive got all the pins and everything out and the only thing holding in the gearbox is this plastic bit around the airnozzle [t]http://www.bingoairsoftworks.com/wp-content/uploads/2012/08/P1050995.jpg[/t] like so it feels like its glued in pretty good what do :c[/QUOTE] you'll also need to remove the selector switches don't lose the ball bearings or you're fucked like I am :c

it's not his pic :( he probably did remov them :(

i did, literally the only thing holding it in was the chunk of plastic. now i just need a tiiiiiiiny hex screw. i guess that will have to wait til tomorrow

small/nonstandard hex screws on guns are such a pain in the ass like kwa and their fucking stupid 1.2mm mag release screw

I just bought myself a set for hex screws (allen keys) because there were some tiny 5/64ths screws holding my motor and gearbox together.

[QUOTE=dwt110;41106682]i saw one of the fucks who used to be on 310 airsoft apparently (maybe still is?) selling an $1100 redwolf hicapa[/QUOTE] was it vartan or jack?

i think vartan

[QUOTE=TerrorShield;41108287]Is this [url]http://www.evike.com/product_info.php?products_id=38296[/url] just a regular G&G CM with a CASV, LE stock, and lolPEQ? Because it's cheaper than buying a Combat Machine and a CASV separately.[/QUOTE] Also, does anyone know if this is wired to the handguard or the buffer tube?

froont

[QUOTE=TerrorShield;41122718]Also, does anyone know if this is wired to the handguard or the buffer tube?[/QUOTE] Its what the peq is for, boyo

I'm guessing a battery can't fit in the CASV hence the mock PEQ. How difficult would it be to wire to the buffer tube? Assuming using a 7.4 lipo. [editline]20th June 2013[/editline] Internals would be the same as a regular G&G CM right?

I thing with front wiring, since its longer, you can just take it out and reseat it to the rear

[QUOTE=TerrorShield;41122765]I'm guessing a battery can't fit in the CASV hence the mock PEQ. How difficult would it be to wire to the buffer tube? Assuming using a 7.4 lipo. [editline]20th June 2013[/editline] Internals would be the same as a regular G&G CM right?[/QUOTE] i THINK you can fit a nunchuck in a casv ask jewnozzle not sure [editline]21st June 2013[/editline] wulf the opposite is true [editline]21st June 2013[/editline] because front wiring just sticks out in front of the trigger mech and only has to reach the handguard through the magwell while rear wiring has to go back around inside the gearbox and then through the whole of the buffer

I've been really enjoying my MP5k, but my birthday is next month and I'm ready to expand my arsenal a little more. (I figure I'll wait until I have two guns before upgrading anything, so if something goes wrong on one while I'm working on it, I can just use a different one) Anyways, CYMA Socom 16, does it shoot under 350 FPS out of the box, and what else should I know about it?

no and its good stock [editline]21st June 2013[/editline] ver.7 gearboxes are kinda annoying

[QUOTE=Joetehpsycho;41127110]I've been really enjoying my MP5k, but my birthday is next month and I'm ready to expand my arsenal a little more. (I figure I'll wait until I have two guns before upgrading anything, so if something goes wrong on one while I'm working on it, I can just use a different one) Anyways, CYMA Socom 16, does it shoot under 350 FPS out of the box, and what else should I know about it?[/QUOTE] Getting another gun is the opposite of what you should do right now, as you'll have two mediocre things instead of one good thing. Also, all the work on the MP5K happens outside of the gearbox, so you'd have to try pretty fucking hard to mess it up.

[QUOTE=the_killer24;41126614]i THINK you can fit a nunchuck in a casv ask jewnozzle not sure [editline]21st June 2013[/editline] wulf the opposite is true [editline]21st June 2013[/editline] because front wiring just sticks out in front of the trigger mech and only has to reach the handguard through the magwell while rear wiring has to go back around inside the gearbox and then through the whole of the buffer[/QUOTE] Except my G&G and rear wired and I tried moving it to front wiring and the wires were too short so I had to buy a new set.

I found a Cyma AK105 for £90. Looks like it's in nice condition and nothing wrong with it. Worth it? I hate the AK105, but at that price i could do things to it to make it so i don't hate it.

what lipo charger should i get imax b6 or thunder ac6? ive read a few people have gotten lemons from the imax.

thundera

[QUOTE=Kath;41116611]Defog it is great. We (Deathmog and I love it) Eridani+Clarity hhhehehee SOOON (No but really we've already spoken to them and theyre very excited to work with us and it's just a matter of paperwork at this point)[/QUOTE] Yeah Clarity is a bunch of bros to work with

[QUOTE=dwt110;41134704]thundera[/QUOTE] ok cool i bought one hope i dont burn my house down i need it

[QUOTE=FloaterTWO;41134464]I found a Cyma AK105 for £90. Looks like it's in nice condition and nothing wrong with it. Worth it? I hate the AK105, but at that price i could do things to it to make it so i don't hate it.[/QUOTE] uk price wise it's a bargain and it's a decent enough gun especially if you plan on upgrading it or making it look even more sexy

I just wanted to thank you for the tips just shot my CM raider and I love it Thanks! Not sure if right thread >.<