The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

if I bought asian fit lenses for my desert locusts, do you think they would just make the frame bend to fit them? The lenses I have currently on my desert locusts I had to bend to make them fit my face and there is a plastic scar right in the middle and I'm not sure what to do concerning them.

are these shit? If so, can you point me to better? [url]http://www.evike.com/product_info.php?products_id=33072[/url]

[QUOTE=Wulfram;41191650]are these shit? If so, can you point me to better? [url]http://www.evike.com/product_info.php?products_id=33072[/url][/QUOTE] i use them and they're pretty ok

what radio and ptt do you use?

I want a new PC, I'm looking at this: [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=13091[/url] except in CB. Anyone have one? Anything I should look at in the same price range or cheaper?

[QUOTE=Wulfram;41192269]what radio and ptt do you use?[/QUOTE] run them just for the earpro and amplification now, haven't used them for comms yet.

[QUOTE=AppleJackson;41193307]I want a new PC, I'm looking at this: [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=13091[/url] except in CB. Anyone have one? Anything I should look at in the same price range or cheaper?[/QUOTE] Pretty sure Ender has one of those and he swears by it. I'd wait for him to confirm though. [sp] I dont know you were Kawaii omg come back and stay back =<[/sp] [editline]26th June 2013[/editline] [QUOTE=JimmyA;41193428]run them just for the earpro and amplification now, haven't used them for comms yet.[/QUOTE] Considering neither I nor Herf actually have any comms, I may do this. Where do you run the cord to when you're wearing them?

[url]http://www.airsoftgi.com/product_info.php?cPath=548_543&products_id=11531[/url] Would goggles like these allow me to wear glasses under them? I used regular eyepro glasses this sunday and I couldn't see fucking shit, it was awful.

get some Revision Desert Locusts on ebay. you can usually get them for pretty cheap. You CAN fit glasses under them, however they tend to fog rather quickly (at least they do for me)

Are these the cheapest Asian-fit goggles? Everything else is way more expensive than their non-Asian fit counterparts. [url]http://www.ebay.com/itm/ESS-Asian-Fit-FirePro-Wildland-Fire-Goggles-740-0380-in-Gray-Red-/271190970914[/url] [editline]26th June 2013[/editline] Like even the regular old black Asian fits are $75. [url]http://www.ebay.com/itm/ESS-Asian-Fit-Profile-Series-Goggles-in-Black-740-0123-/360637836200[/url]

is it possible to make this [img]http://images2.wikia.nocookie.net/__cb20100618010458/battlefield/images/6/6c/BarrettM95.jpg[/img] out of this [thumb]http://www.evike.com/images/large/Sniper_LRSA99_lg.jpg[/thumb] given that the mag would be purely aesthetic?

[QUOTE=Recurracy;41194877][url]http://www.airsoftgi.com/product_info.php?cPath=548_543&products_id=11531[/url] Would goggles like these allow me to wear glasses under them? I used regular eyepro glasses this sunday and I couldn't see fucking shit, it was awful.[/QUOTE] i'm going to once again recommend the ess land ops, the goggles approved by ~~~AMERICA'S ARMY~~~ for wearing corrective eyewear under

[QUOTE=AppleJackson;41193307]I want a new PC, I'm looking at this: [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=13091[/url] except in CB. Anyone have one? Anything I should look at in the same price range or cheaper?[/QUOTE] it only comes in coyote tan, not brown. theres a pretty obvious difference

[QUOTE=TerrorShield;41195132]Are these the cheapest Asian-fit goggles? Everything else is way more expensive than their non-Asian fit counterparts. [url]http://www.ebay.com/itm/ESS-Asian-Fit-FirePro-Wildland-Fire-Goggles-740-0380-in-Gray-Red-/271190970914[/url] [editline]26th June 2013[/editline] Like even the regular old black Asian fits are $75. [url]http://www.ebay.com/itm/ESS-Asian-Fit-Profile-Series-Goggles-in-Black-740-0123-/360637836200[/url][/QUOTE] get goggles in taiwan, all ballistic rated and cheap

ESS ICE are pretty fucking comfortable and work great, get the revisions on ebay for like $20 maybe a tad bit higher sometimes and just cut out the foam completely.. thats what i did and i have zero fogging. revision exo shields are pretty nice too

[QUOTE=Wulfram;41193475]Pretty sure Ender has one of those and he swears by it. I'd wait for him to confirm though. [sp] I dont know you were Kawaii omg come back and stay back =<[/sp] [editline]26th June 2013[/editline] Considering neither I nor Herf actually have any comms, I may do this. Where do you run the cord to when you're wearing them?[/QUOTE] I run my cord through the headband cover so it goes to the right earcup, then i just loop it around the wiring that's there once, then through the little metal headband wire

[url]http://www.rap4.com/store/paintball/p/011599/rap4-integrated--training-helmet-desert[/url] or [url]http://www.rap4.com/store/paintball/p/015218/emerson-fast-vented-integrated-training-helmet-desert-tan[/url]

neither for that price

If you're paying that much for a FAST, then there's literally no reason not to get the Dragonred. [editline]26th June 2013[/editline] [url]http://dragonredairsoft.com/catalog/product_info.php?cPath=33_40&products_id=173[/url]

dergon red literally has that exact mich for like $40

That's useful, but isn't that dude known for being a scamming, bullshit spewing piece of shit? Also, MICH or Fast?

apache literally just bought and received a dergonred premium fast

no no not reddragon [I]dragonred[/I] [editline]26th June 2013[/editline] one is nice helmets and the other is some white guy in oregon who makes bad videos and bitches about everything

[QUOTE=dwt110;41203552]no no not reddragon [I]dragonred[/I] [editline]26th June 2013[/editline] one is nice helmets and the other is some white guy in oregon who makes bad videos and bitches about everything[/QUOTE] That's a really unfortunate association.

[QUOTE=AppleJackson;41193307]I want a new PC, I'm looking at this: [url]http://www.airsoftgi.com/product_info.php?cPath=28_171&products_id=13091[/url] except in CB. Anyone have one? Anything I should look at in the same price range or cheaper?[/QUOTE] Go for it. Love mine, works great for just about anywhere I play. Bought mine here before they got super popular, was only $115 at the time. Price has gone up, probably due to demand. [url]http://www.opticsplanet.com/tactical-assault-gear-banshee-rifle-plate-carrier.html[/url] Highly recommend some fake plates for it though, or for any plate carrier. Helps keep the shape and fit of it

Is there a safe way to keep a gbb pistol (WE 1911, specifically) firing without any bbs in the mag? Right now I'm using a pencil eraser mashed into the side of the mag to keep the spring down, but I'm worried that might not be the safest option for gun or for breakable objects/people downrange (using it as a movie prop).

remove the pin at the top of the magazine, take out the feed lips/top part, remove the magazine follower and spring, replace top part and pin done (obviously if you want it to feed/fire bbs you'll need to put the follower and spring back in)

Put your thumb on the slide release.

[QUOTE=the_killer24;41205343]remove the pin at the top of the magazine, take out the feed lips/top part, remove the magazine follower and spring, replace top part and pin done (obviously if you want it to feed/fire bbs you'll need to put the follower and spring back in)[/QUOTE] Thanks! [editline]26th June 2013[/editline] [QUOTE=Apache249;41205345]Put your thumb on the slide release.[/QUOTE] Now I just feel dumb.

Hey guys, long time lurker first time poster around these parts. I'm kinda new to airsoft, (I have some basic gear, plate carrier, a couple of molle pouches, CYMA AK, nothing overly fancy,) and I usually play with friends, but they all moved on from airsoft. I'm wondering if y'all had any knowledge about places to play around Dallas/Fort Worth? I know there was a CQB place around here that shut down recently, so I'm at a loss of where to play..