The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?" - General

Okay, with that said i'll do a bit of research, I have a few days and he's holding onto it for me. I think I could always resell it if I don't like it anyway, so it might be a good deal either way. [editline]1st September 2013[/editline] He says that he thinks it's a SCWII and the extra slide is like an LAPD slide or something he mentioned.

well perfect. SCWII is the best

Is Emerson multicam okay? I'm going operator on a budget and slowly gonna work my way in to real gear.

I'd like to know too. Emerson's AOR2 combat set looks pretty good and is a lot cheaper than what else I've found. I really like AOR2.

[QUOTE=TerrorShield;42047325]I'd like to know too. Emerson's AOR2 combat set looks pretty good and is a lot cheaper than what else I've found. I really like AOR2.[/QUOTE] I was considering doing a kit with AOR2 combat shirt, AOR1 pants and pc. Decided on multicam tho. [editline]1st September 2013[/editline] Well I can report back on this soon if anyone is interested. Just ordered the multicam shirt after consulting I/G. The 20% of responses that werent "CRYE OR DIE" were very helpful, seemed to say avoid the Emerson pants, but their pattern is good and the shirt will hold up.

Herf, when did you become an OPAERTOR?

He is herforatur

[QUOTE=Biscuit-Boy;42050738]Herf, when did you become an OPAERTOR?[/QUOTE] When I switched my Block 1 stuff to a 12 inch rail and a short foregrip on my m4.

[QUOTE=venom;42026230]Just say "*pic* the thing to adjust the stock doesn't work, it's just stuck in position and is pretty wobbly now" or something to that effect? [editline]30th August 2013[/editline] i honestly have no idea how those stocks work, so that picture is just kinda like "wtf am i looking at here"[/QUOTE] Actually, there are these two small tabs that stick out from the bottom and you should've said they snapped off or something

AIM vs G&P for micro T-1? [url]http://www.evike.com/product_info.php?cPath=32_182&products_id=42181[/url] [url]http://www.evike.com/product_info.php?cPath=32_182&products_id=32163[/url]

G&P.

I need a quick answer to this since I'm ordering BB's tonight: Do .28's work well in tri-shots? Buying 4 bottles of Elite Force .28s (2700ct) is cheaper than buying 3 bottles of it then adding on .25's to use for the shotgun. ASGI is out of .25 EF BB's so I'm looking for a good alternative brand, the Airsoft Elite .25's (3000ct) looks good, it's a few bucks extra but I don't know how many people here like them. [editline].[/editline] Or this... [URL]http://www.airsoftgi.com/product_info.php?products_id=11036[/URL]

I've always used G&G and ASGI G4 .25s, never had any issues. Both usually go out of stock fairly quick though.

Alright that'll fit in what I want to pay, I'll take off one of the .28 bottles. Thanks

If you've never tried .28s at all, it won't hurt to buy a bag or bottle of them just to see if you like them. If you don't, oh well, use them for CQB or something.

I use them in my AEG's, my favorite weight by far, but I'll try a bag of .25s for the trishot to try them out. Actually the only time I've ever used .25s was when I was at a chrono...

Would using two guns at the same time be a good tactic for causing confusion to the enemy on how many squadmates are there?

[QUOTE=Rageblood;42060889]Would using two guns at the same time be a good tactic for causing confusion to the enemy on how many squadmates are there?[/QUOTE] I remember back in 2009 I was in an airsoft league, we had this idea to set up some of our extra guns behind cover so people would just see the barrel sticking out of them. It was stupid effective.

[QUOTE=Rageblood;42060889]Would using two guns at the same time be a good tactic for causing confusion to the enemy on how many squadmates are there?[/QUOTE] Why do I feel like you got that from something?

[QUOTE=apoctank;42061202]Why do I feel like you got that from something?[/QUOTE] I one time was hiding inside a bush while I was trying to go up a hill. I duel wielded my AEG and GBB handgun and cause a small moment of confusion, until I exhausted my ammunition with both and got hit before I could reload.

okay so VFC agreed to send me a "replacement" 416C stock .. can i get this to fit on a G&P 416 lower?

[QUOTE=venom;42065526]okay so VFC agreed to send me a "replacement" 416C stock .. can i get this to fit on a G&P 416 lower?[/QUOTE] You might need to chop down the buffer tube adaptor thing, as it's short AF on the 416C(like around the neighborhood of a centimeter I'd say)

buffer tube adapter thing??

[QUOTE=venom;42065600]buffer tube adapter thing??[/QUOTE] Go look at my last post in tacticlol, you'll see what I mean

ohhh interesting i should probably check what they're including with the stock [editline]3rd September 2013[/editline] they also said this [img]http://i.imgur.com/ZJfYcSl.jpg[/img]

[QUOTE=venom;42065692]ohhh interesting i should probably check what they're including with the stock [editline]3rd September 2013[/editline] they also said this [img]http://i.imgur.com/ZJfYcSl.jpg[/img][/QUOTE] That's probably just due to the issue I mentioned. Worst case scenario you just cut down the buffer tube adaptor thing on your receiver

[QUOTE=venom;42065526]okay so VFC agreed to send me a "replacement" 416C stock .. can i get this to fit on a G&P 416 lower?[/QUOTE] what is the cost?

[QUOTE=Fish Muffin;42072959]what is the cost?[/QUOTE] Suddenly VFC inbox is full of the same broken stock picture

Is [URL="http://www.zerooneairsoft.com/product_info.php?products_id=2383"]Zero One 'Pro Gas'[/URL] really a white-label version of [URL="http://www.zerooneairsoft.com/product_info.php?products_id=2382"]Abbey Ultra[/URL]?

[QUOTE=Fish Muffin;42072959]what is the cost?[/QUOTE] A bit of dignity over scamming a customer-friendly company for parts, I imagine.