The Official Questions Thread Version: "Charlies in the trees, what do I need to get rid of them?"

[Ninja Duck]

I think it's [url]http://www.bulkairsoftammo.com/[/url] since they have free shipping iirc.

[Mai]

[img]http://puu.sh/4wgvP.png[/img]
[img]http://puu.sh/4wgyr.png[/img]

jussayin

[editline]20th September 2013[/editline]

also crazyncman

[Hirouzamaki]

^You also have to factor in shipping. If you're just buying a $12 bag, you have to add in another ~$9

[Kath]

Those are the shit Biovals, just saying.

[Ninja Duck]

Shit what else should I bring with me to the WW2/whatever it is game tomorrow? It's supposed to be full immersion so no going back to the parking lot or whatever to resupply...I usually just bring food, BB's, and a multitool... I've got a buttpack to fill.

[Rageblood]

[QUOTE=Ninja Duck;42259523]Shit what else should I bring with me to the WW2/whatever it is game tomorrow? It's supposed to be full immersion so no going back to the parking lot or whatever to resupply...I usually just bring food, BB's, and a multitool... I've got a buttpack to fill.[/QUOTE]

Try and sneak in a Medium ALICE rucksack.

[Wulfram]

So I'm going to do based of the guy in the middle.

[t]http://upload.wikimedia.org/wikipedia/commons/7/71/Delta_force_GIs_disguised_as_Afghan_civilians,_November_2001_C.jpg[/t]

should I go with this:
[img]http://gyazo.com/fd709fd36c0eb041e2cf98abdcfede15.png[/img]

or this:

[img]http://www.airsoftgi.com/images/AIRSOFT_LT_CA-308T_A.jpg[/img]

the complete chest rig would be MUCH cheaper, but I think the other chest rig would be more accurate AND I could do a Parker Luciani cosplay, which I've been wanting to do that since I feel like thats the only character I could cosplay properly. Thoughts?

[Mai]

[QUOTE=Kath;42259460]Those are the shit Biovals, just saying.[/QUOTE]

okay then i guess the 16,000 of those i ran through my pkm without flaws were just the 4 good bags out of the batch then??????

[editline]21st September 2013[/editline]

[QUOTE=Hirouzamaki;42259374]^You also have to factor in shipping. If you're just buying a $12 bag, you have to add in another ~$9[/QUOTE]

also buying 1 bag of bbs at a time is generally not the greatest idea

[deathmog]

[QUOTE=the_killer24;42265351]okay then i guess the 16,000 of those i ran through my pkm without flaws were just the 4 good bags out of the batch then??????

[editline]21st September 2013[/editline]

also buying 1 bag of bbs at a time is generally not the greatest idea[/QUOTE]

The new Biovals are bad because Palco owns them now and changed the formula, the original creator of the good Bioval recipe owns High Powered Airsoft BB's now and they're the good Bioval formula.
At least from what i've heard.

[Kath]

[QUOTE=the_killer24;42265351]okay then i guess the 16,000 of those i ran through my pkm without flaws were just the 4 good bags out of the batch then??????

[editline]21st September 2013[/editline]

also buying 1 bag of bbs at a time is generally not the greatest idea[/QUOTE]

I know. I never said they were [B][I]shit BBs[/I][/B], I said they were shit [B][I]BioVals[/I][/B], compared to the old ones.

[Joetehpsycho]

Having trouble freeing the wires in the stock of my AK, I don't have the allen wrench that fits the stock screws, but I saw a guy on youtube just slide the wire out.
The tamiya connecter is getting caught on something, but I can't see because of the angle, any ideas?

And I just lost a bushing...

[Rageblood]

What is a good place online to sell airsoft and airsoft accessories?

I'm trying to sell my WE 1911 parts on Ebay but I keep getting calls from them where they sound like they got a stick up their butt.

[Fish Muffin]

[QUOTE=Heldure;42257152]I need shotgun help.
thinking about getting a maruzen m1100 and tapping it for HPA.
how viable is this? Im willing to put money and time into this to mod the hell out of it and make it worth using. AEGs are getting boring as all hell and I dont mind being at a disadvantage when playing.[/QUOTE]

attention rabies

[catbarf]

[QUOTE=Heldure;42257152]I need shotgun help.
thinking about getting a maruzen m1100 and tapping it for HPA.
how viable is this? Im willing to put money and time into this to mod the hell out of it and make it worth using. AEGs are getting boring as all hell and I dont mind being at a disadvantage when playing.[/QUOTE]

100% doable. In fact, you don't even need HPA, since CO2 works just fine. The conversion itself is dead simple once you have the parts, the bigger issue with the 1100 is replacing the extractor so that it doesn't kill itself.

I used my Maruzen-based M1014 last night to great effect. In a CQB game, nothing is scarier.

[apoctank]

[QUOTE=Joetehpsycho;42267252]Having trouble freeing the wires in the stock of my AK, I don't have the allen wrench that fits the stock screws, but I saw a guy on youtube just slide the wire out.
The tamiya connecter is getting caught on something, but I can't see because of the angle, any ideas?

And I just lost a bushing...[/QUOTE]

The little hole that you feed the wires through in the back of the receiver is just big enough to perfectly fit a tamiya connector, and too big for deans(I had to file down the sides of my connector)

[Kali]

Has anyone heard of the manufacturer 'boyi'?

I found some [URL="http://www.taiwangun.com/en/m4-series-mid-cap-magazine-for-130-bb-s-boyi"]midcaps[/URL] made by them that are cheap as hell and i was thinking of getting some, but i'm wondering if they're so cheap because they're shit or something.

[Herfjotur]

[QUOTE=FloaterTWO;42276775]Has anyone heard of the manufacturer 'boyi'?

I found some [URL="http://www.taiwangun.com/en/m4-series-mid-cap-magazine-for-130-bb-s-boyi"]midcaps[/URL] made by them that are cheap as hell and i was thinking of getting some, but i'm wondering if they're so cheap because they're shit or something.[/QUOTE]

its Dboys

[Kali]

I've never heard of them referred to as that before, so i didn't know :v:

Are they any good, or not worth it?

[Herfjotur]

[QUOTE=FloaterTWO;42276822]I've never heard of them referred to as that before, so i didn't know :v:

Are they any good, or not worth it?[/QUOTE]

I think everyone here likes dboys mids, though i don't have any experience with them.

[Kath]

DBoys midcaps are literally fantastic.

[Kali]

Then i will buy many of them. Thanks guys.

[deathmog]

Hey guys, does anyone know anything about making black combat boots brown?
My father was in the 82nd and has a pair of corcoran jump boots *somewhere* (I haven't found them yet) and although it might be a silly question I was wondering how feasible it'd be. Obviously it'd be harder than say, brown to black but I'd still like to see if anyone has any ideas.

[felix the cat]

You might possibly be able to bleach them, and then dye them brown. Kind of a shot in the dark though.

[Zero_X54321]

I'm looking to buy a light to go on the front of my [url=http://www.evike.com/product_info.php?products_id=30949]KWA USP Full Size[/url] that I bought, but I don't know if something like [url=http://www.evike.com/product_info.php?products_id=24761]This[/url] would work because the rails on the gun end about a quarter of an inch earlier than the front of the gun does. so I don't know if I'll be able to get the light to fit on the gun, since it looks like it just slides onto the rail on the pistol you buy it for.

Anyone have one or both of these products that can help me out?

[Notrabies]

I have the light, and while I don't know about fitment, I do know that I really disliked the controls on it as they're not at all easy to use while having the gun in a firing position.

[Wulfram]

keep in mind if you get a USP, you need to get a rail adapter because the USP has proprietary rails

[Zero_X54321]

[QUOTE=Wulfram;42290576]keep in mind if you get a USP, you need to get a rail adapter because the USP has proprietary rails[/QUOTE]

I've GOT a USP, I was just wondering if I could get that mount onto it. apparently I can't because I need that adapter.

[Wulfram]

[url]http://www.evike.com/product_info.php?products_id=28299[/url]

thats the adapter you would need. You just mount it to the USP's rail and then you could use that flashlight you wanted. Although I would recommend one of these instead.

[url]http://www.evike.com/product_info.php?cPath=33_190&products_id=30618[/url]

The controls are much easier to use when you're in a firing position

[Joetehpsycho]

Now that I've got an AK, I'm interested in putting together a Guerrilla/Rebel style loadout.

I'll most likely be using Tiger Stripe/Black BDUs as I've been doing, but I'm also considering either DPM or M81.

My biggest concern so far is what I should do about a chest rig, I've considered buying a triple AK mag pouch for my Condor Plate Carrier, but that doesn't exactly match the guerrilla look that I'm going for.
[URL="http://www.airsoftgi.com/product_info.php?products_id=15136"]http://www.airsoftgi.com/product_info.php?products_id=15136[/URL]
This is sort of what I'm looking for, but I'd like something without molle.

Any suggestions?

[apoctank]

[QUOTE=Joetehpsycho;42296736]Now that I've got an AK, I'm interested in putting together a Guerrilla/Rebel style loadout.

I'll most likely be using Tiger Stripe/Black BDUs as I've been doing, but I'm also considering either DPM or M81.

My biggest concern so far is what I should do about a chest rig, I've considered buying a triple AK mag pouch for my Condor Plate Carrier, but that doesn't exactly match the guerrilla look that I'm going for.
[URL="http://www.airsoftgi.com/product_info.php?products_id=15136"]http://www.airsoftgi.com/product_info.php?products_id=15136[/URL]
This is sort of what I'm looking for, but I'd like something without molle.

Any suggestions?[/QUOTE]

Chicoms doe!!! Or this shit if you want to order from ASGI:
[url]http://www.airsoftgi.com/product_info.php?products_id=11949[/url]