got my comtacs, awesome, ordered the ptt, should be awesome
I'm going to buy an upgraded Echo 1 AUG and a Dboys Kar98 from one of my friends for $250. The AUG is going to be my main weapon, the Kar98 is probably just going to be something to hang on the wall in my room.
Thats really all the dboys kar98 has besides a plinker maybe. It has a two peice inner barrel
G&P m4a1, tight bore barrel, m170 motor.
[QUOTE=BlueSaint;22050227]Or more bags of bb's.[/QUOTE]
Pffff, thinking ahead, yeah right.
Just picked up a MBUS front sight in black to complete my Larue M4, and a 3 pack of Pro Arms 98rd grenade shells.
Unfortunately, the grenade shells have a ring on them which has a diameter larger than that of part of my AGX launcher. So pretty much the shell only goes half way in. This gives me a few projects I can do at work tomorrow.
1. Toss the grenade shells on the lathe and turn them down to the proper diameter. Estimated work time: 2 minutes at most each.
2. Construct extended trigger pins for the grenade shells for hand held firing. Possibly drill a hole through the side and add a pin as a safety. I'll have to take a bunch of dimensions of the original pin and do quite a few operations on the lathe to cut it. Estimated work time: 1+ hours.
[QUOTE=Newbienice99;22075160]Pffff, thinking ahead, yeah right.[/QUOTE]
I plan to buy 10 bags of bb's 5 white and 5 black and mix them for best results.
[QUOTE=BlueSaint;22080770]I plan to buy 10 bags of bb's 5 white and 5 black and mix them for best results.[/QUOTE]
Makeshift airsoft tracers. Nice.
[QUOTE=BlueSaint;22080770]I plan to buy 10 bags of bb's 5 white and 5 black and mix them for best results.[/QUOTE]
I wanted to do that once, but the black ones I had were really really low quality (like Wal-Mart stuff).
[QUOTE=Identity;22083202]Makeshift airsoft tracers. Nice.[/QUOTE]
Mostly because the black are hard to see and make a good shot in games with a white one every so often for the tracer so I know where I am hitting.
Also going to buy a 11th pack and have it white for ajusting sights.
my friends used to load 5-10 whites then the rest black so then they'd know when they were running low on ammo
You probably don't need equal amounts of whites and blacks. 2:1 or 3:1 would probably still work very fine.
I'm going to be buying a ChiCom NVA AK chest rig for £8 on AirsoftWorld. It can hold M4/M16 mags and I have a AGM HK416 so its all good. Also I am wanting to buy a good AK74 with full steel and wood. Also it would be nice to have blowback. Any suggestions for that?
[editline]07:44PM[/editline]
And you may have figured already but I need something from the UK unless a foreign website has uber cheap P&P.
Probably
[URL="http://www.airsoftgi.com/product_info.php?products_id=2903"]D-Boy Full Metal/Real Wood Ak74un[/URL]
[URL="http://www.airsoftgi.com/product_info.php?products_id=5281"]Extra 8.4v battery[/URL]
As many KSC .25 bbs as I can afford afterward.
Getting an 8.4v because the smart charger I have only charges 7.2s and 8.4s :< (it wasn't made for airsoft specifically)
Know where I could get it in the UK?
[editline]08:36PM[/editline]
Also not a 74u but a AKS-74 or however it is. The full size one with the foldable metal stock.
Guys, British DPM or Flecktarn for new BDUs? Will be used with OD vest.
[QUOTE=Fenriswolf;22111179]Guys, British DPM or Flecktarn for new BDUs? Will be used with OD vest.[/QUOTE]
flecktarn cause it looks cool :downs:
[QUOTE=Fenriswolf;22111179]Guys, British DPM or Flecktarn for new BDUs? Will be used with OD vest.[/QUOTE]
Depends on where you play.
[QUOTE=Newbienice99;22101588]You probably don't need equal amounts of whites and blacks. 2:1 or 3:1 would probably still work very fine.[/QUOTE]
Yea but the ratio is always mixed when I load them anyway.
I guess I could do 12 black and 10 white mixed.
Then 1 white for sighting.
Probably going to get that Intercepter Vest I always wanted, a new charging handle and some flip up iron sights. Maybe a new battery in the near future.
[QUOTE=Inafinus :3;22105884]I'm going to be buying a ChiCom NVA AK chest rig for £8 on AirsoftWorld. It can hold M4/M16 mags and I have a AGM HK416 so its all good. Also I am wanting to buy a good AK74 with full steel and wood. Also it would be nice to have blowback. Any suggestions for that?[/QUOTE]
GHK makes the only GBBR AK's that I know of. Stock they aren't the most reliable but if you buy a few extra steel parts (bolt, etc.) then its quite reliable from what I've heard. Pretty pricey though. For non-blowback AK's, Dboys is the best bang for your buck (they are pretty damn cheap).
Well... there is one other gas blowback AK that I know of. But it's $1,000
[QUOTE=Inafinus :3;22105884]I'm going to be buying a ChiCom NVA AK chest rig for £8 on AirsoftWorld. It can hold M4/M16 mags and I have a AGM HK416 so its all good. Also I am wanting to buy a good AK74 with full steel and wood. Also it would be nice to have blowback. Any suggestions for that?
[editline]07:44PM[/editline]
And you may have figured already but I need something from the UK unless a foreign website has uber cheap P&P.[/QUOTE]
Guarder makes a blowback kit for an AEG AK-47 [url]http://www.zerooneairsoft.com/product_info.php?products_id=3147[/url] i havent had any personal experience with it but ive heard that you need to do some heavy mods (zero-one are upgrading their site at the moment so the pic and description are gone should still be able to buy though)
EDIT: [url]http://www.airsoftextreme.com/store/index.php?main_page=product_info&products_id=3229[/url] an american site sells it too incase your from over the pond :P
Daytona AK's really nice. One of the best Blowbacks i ever fired
Just bought a spare part kit for my tornado grenade, new goggles, and a brown/black shemagh.
-Condor EMT pouch
-We Hi-Capa (M9 turned out to be further broken than I though)
-Spare magazines
love this gun
[url]http://www.airsoftgi.com/product_info.php?products_id=3774&osCsid=qoq2obod09tl6kvo86q1ioqnu1[/url]
Ok I am still going for the AKS-74 and D-boys is my best bet. But I'm going for a stalker look now and I will be buying an M58 Pattern web gear kit. They look pretty Stalkerish.
[editline]04:44PM[/editline]
[QUOTE=MC Mackers;22142261]Guarder makes a blowback kit for an AEG AK-47 [url]http://www.zerooneairsoft.com/product_info.php?products_id=3147[/url] i havent had any personal experience with it but ive heard that you need to do some heavy mods (zero-one are upgrading their site at the moment so the pic and description are gone should still be able to buy though)
EDIT: [url]http://www.airsoftextreme.com/store/index.php?main_page=product_info&products_id=3229[/url] an american site sells it too incase your from over the pond :P[/QUOTE]
I am like pure mad mental Scottish likes. No need for Yankees websites here.
My next purchase is probably going to be a tactical AK. Anyone know the best one there's like 10 good ones that I like to choose from.
There are no good tactical AK's I'm afraid.
Sorry, you need to Log In to post a reply to this thread.