Firearms XII; Because Merica - General

[QUOTE=mastoner20;47005081]What're the questions? Most likely some of us here can help.[/QUOTE] Well.. The ejector on the weatherby orion is... sticky. I can manually cycle it and can heel a hang in it. And I've briefly searched how to take it apart and clean it with no avail. And on the benelli supernova theirs slack were I don't want slack and theirs this bad groove cut into the top of the gun... The photo quality might be iffy as Its 11pm here and I don't wanna break out the lighting equipment. (Benelli) Slack in pump [t]https://dl.dropboxusercontent.com/u/1031910/Guns/IMG_1365-2.jpg[/t][t]https://dl.dropboxusercontent.com/u/1031910/Guns/IMG_1380-2.jpg[/t] [t]https://dl.dropboxusercontent.com/u/1031910/Guns/IMG_1370-2.jpg[/t][t]https://dl.dropboxusercontent.com/u/1031910/Guns/IMG_1381-2.jpg[/t] And here's of the bad groove in the upper part of the (receiver?) [t]https://dl.dropboxusercontent.com/u/1031910/Guns/IMG_1388-2.jpg[/t]

For the slack, it might be the screw holding the action in place might need tightened/may be stripped. As for the ejector, try lubricating it. Also, if you have a spent shell, check and see how well the ejector's making contact with the rim. If it's not making good contact, it may be worn down and need replacing or it might have worked loose and need readjustments.

[QUOTE=MR-X;47001550]Does anyone have a list of websites to buy AR15 parts? I've been trying to get my hands on something like this [url]http://www.del-ton.com/Rifle_Kit_p/rkt102.htm[/url] but they've been out of stock for ages now.[/QUOTE] $424.99 In Stock [url]http://www.midwayusa.com/product/615123/del-ton-rifle-kit-ar-15-556x45mm-nato-1-in-9-twist-20-government-contour-barrel?cm_vc=ProductFinding[/url]

Decided I am going to be saving up for my 2 dream guns a Semi Auto RPD [IMG]http://cdn2.armslist.com/sites/armslist/uploads/posts/2013/01/09/821948_02_rpd_belt_fed_semi_auto_uses_ak_640.jpg[/IMG] And a Polish Underfolder Sem Auto [IMG]http://www.atlanticfirearms.com/images/stories/virtuemart/product/VPOL-UF.jpg[/IMG] Do want so badly.

After shooting only 6 boxes of Silver Bear .223 in my AR, I have concluded that it's the dirtiest ammo I've ever shot. Those 5 boxes didn't misfire, but the cases came out almost black from carbon buildup after 3 boxes. By the 6th box, a BCG inspection while cleaning revealed to me that the bolt felt like it had sand and grit in it, but the oil I used mixed with the extreme amount of carbon to form a sort of abrasive grease. I shot some ZQ 5.56 M855 out of it immediately after a mag of the Silver Bear, and the cases came out clean, and ZQ is actually around the same price as the bulk stuff, coming in at roughly $10-11 per box of 30.

Heres the shotgun I own currently: [IMG]http://i.imgur.com/A2TzQngl.jpg[/IMG] Its a Franchi 12 gauge over/under. I shoot clays with it mostly, but I do some target shooting with it around the place where I live as well.

There's something sexy about over/under shotguns that I love. That and I always feel like they shoot better than double-barrels, generally.

I really want one of those Kel Tec RDBs

Anyone familiar with High Standard pistols? Some guy wants to trade my grandpa for a .22 or $150. I'm not familiar with it to give an informed opinion. It's a semi-auto .380, nickel or steel finish almost like new. I've looked on google images to see what they look like and totally got the Saturday night special vibe, so my question is what is the quality like on these pistols and are they really worth anything?

[QUOTE=snapshot32;47008294]Anyone familiar with High Standard pistols? Some guy wants to trade my grandpa for a .22 or $150. I'm not familiar with it to give an informed opinion. It's a semi-auto .380, nickel or steel finish almost like new. I've looked on google images to see what they look like and totally got the Saturday night special vibe, so my question is what is the quality like on these pistols and are they really worth anything?[/QUOTE] High Standard, is exactly that, High Standard. I have a few of their .22 target guns and they consistently out shoot heavily worked on Ruger MK II/III's. I have won a lot of Thanksgiving Turkeys at shooting competitions with it. If this is a G380, which looks a LOT like the 22 I own, GET IT NOW. [url]http://www.gunsamerica.com/944371139/RARE-High-Standard-G-380-Pistol-1Of-7400.htm[/url] [editline]25th January 2015[/editline] [url]http://www.rockislandauction.com/viewitem/aid/51/lid/632[/url] Value: $750-$1,000 [editline]25th January 2015[/editline] [img]http://www.rockislandauction.com/photos/51/p_standard/ARD17-K-F1-H.jpg[/img] This is a G380. [img]http://picturearchive.gunauction.com/129204511/12032708/037_edited-2.jpg_thumbnail0.jpg[/img] This is a Sport-King model, very similar to mine. [editline]25th January 2015[/editline] The Sport King is a .22LR [editline]25th January 2015[/editline] This probably goes without saying, if you don't want it, I'll double your money for it. Hows $300 sound? :v:

Looked on armslist, it's the same model as one of those back-up pistols for law enforcement. [t] http://gunsgunsguns.net/wp-content/uploads/2010/08/AMT-BackUp-45-Left-View.jpg [/t] Not that particular gun from armslist, but the price on it was 399.

Seconded. High Standards are amazing little pistols when you can actually get one.

My pair of .22s [img]http://i.imgur.com/HVIeX9fh.jpg[/img]

So he just turned up with a fucking hi-point with a busted mag release. Seems he got high-standard and high-point confused despite it being written on not only the case but the pistol itself and me showing him pictures of what a high standard looks like. I made my opinions vocal.

[QUOTE=darunner;47008646]My pair of .22s [img]http://i.imgur.com/HVIeX9fh.jpg[/img][/QUOTE] Hey i got the same set of 22s. Except my sig is coated desert tan. Both guns are fun as hell to shoot.

i took my norinco SKS and my M1 carbine out into the woods, and my buddy took his remmy 870 with 00 buckshot and his bersa thunderpro .40 we shot an AR500 plate about 38 times with FMJ loads and the coating exploded off the plate but didnt even dent the plate itself lmao

[QUOTE=darunner;47008646]My pair of .22s [img]http://i.imgur.com/HVIeX9fh.jpg[/img][/QUOTE] Does anyone else get a toy vibe from that revolver? :v:

[QUOTE=darunner;47008646]My pair of .22s [img]http://i.imgur.com/HVIeX9fh.jpg[/img][/QUOTE] Is that a Heritage Rough Rider revolver?

[QUOTE=hydrated;47004861][url]http://palmettostatearmory.com/index.php/catalog/product/view/id/12908/[/url] [url]http://palmettostatearmory.com/index.php/catalog/product/view/id/172/category/389/[/url] they seem to be out of a2 stocks but that's all you'd be missing. You should be able to find one for around $60 online[/QUOTE] Do i even need a FFL to order that upper? I don't see where it says I need one.

[QUOTE=MR-X;47011673]Do i even need a FFL to order that upper? I don't see where it says I need one.[/QUOTE] The lower is the actual gun. Everything else can go straight to your door.

[QUOTE=Pilot1215;47011642]Is that a Heritage Rough Rider revolver?[/QUOTE] Nah, F.I.E. Buffalo Scout. Banned from import under the Saturday Night Special law. Blue book in 100% condition is $75

[QUOTE=darunner;47011906]Nah, F.I.E. Buffalo Scout. Banned from import under the Saturday Night Special law. [B]Blue book in 100% condition is $75[/B][/QUOTE] Fact. I also own one. [editline]26th January 2015[/editline] This looks awesome. Refreshing take on the AK rifle. [url]http://www.thefirearmblog.com/blog/2015/01/23/mm-industries-m10x-ak/[/url] [img]http://www.thefirearmblog.com/blog/wp-content/uploads/2015/01/image20-e1422023936415-920x475.jpg[/img] [img]http://a.disquscdn.com/uploads/mediaembed/images/1657/1008/original.jpg[/img] Check out that Name Tag, HI IAN! [editline]26th January 2015[/editline] [QUOTE=AntontheFox;47005985]Heres the shotgun I own currently: [IMG]http://i.imgur.com/A2TzQngl.jpg[/IMG] Its a Franchi 12 gauge over/under. I shoot clays with it mostly, but I do some target shooting with it around the place where I live as well.[/QUOTE] Is that an SKB 600? Made in Japan? I have one just like that in 20 ga. Want a picture? [editline]26th January 2015[/editline] Looks like EAA/Witness has anounced a Poly Frame 1911 for 2015. MSRP is under $600 in .45 ACP, GI size. [editline]26th January 2015[/editline] Radom is bringing the MSBS and PM-06 to market this year. [img]http://www.thefirearmblog.com/blog/wp-content/uploads/2015/01/DSC008202-660x495.jpg[/img] [img]http://world.guns.ru/userfiles/images/smg/smg137/pm06.jpg[/img] Less stock, of course.

[QUOTE=Camwi_003;47012099]Fact. I also own one.[/QUOTE] Yeah, I think in the last thread we were talking about them. I've been meaning to ask what you thought of the Archangel stock you put on your AK? I'm ditching my wood furniture and am open to options besides a VLTOR tube.

[QUOTE=darunner;47012160]Yeah, I think in the last thread we were talking about them. I've been meaning to ask what you thought of the Archangel stock you put on your AK? I'm ditching my wood furniture and am open to options besides a VLTOR tube.[/QUOTE] Get a polish beryl sidefolder or one of the new magpul stocks.

[QUOTE=Camwi_003;47012099]Check out that Name Tag, HI IAN![/QUOTE] Ian is probably my favorite firearms personality. He makes great videos and has access to all sorts of neat stuff without having a super abrasive personality.

[QUOTE=MAC21500;47012986]Get a polish beryl sidefolder or one of the new magpul stocks.[/QUOTE] The Zhukov stock looks too much like the AK-12 stock, which I don't like at all. The AK MOE is nice, but I'd like something adjustable.

Update on the ghetto blaster. We fixed the mag release by cannibalizing the battery spring and plate off of a portable radio supplied by the AARP, we scotch tapped the plate onto the frame and placed the spring over the mag holder bar thing, after which we carefully replaced the grips and cut away the excess tape. Ran one round through it and it cycled fine. At this point I wore an expression of both amusement and befuddlement.

[QUOTE=snapshot32;47015455]Update on the ghetto blaster. We fixed the mag release by cannibalizing the battery spring and plate off of a portable radio supplied by the AARP, we scotch tapped the plate onto the frame and placed the spring over the mag holder bar thing, after which we carefully replaced the grips and cut away the excess tape. Ran one round through it and it cycled fine. At this point I wore an expression of both amusement and befuddlement.[/QUOTE] What? Why are you bothering with this guy still? [editline]26th January 2015[/editline] Or wait, your grandpa bought it? I guess I had read it like the dude showed up to trade with the completely wrong gun. Nevermind.

[QUOTE=MR-X;47011673]Do i even need a FFL to order that upper? I don't see where it says I need one.[/QUOTE] nope. if it's not a lower it can do straight to your door

[QUOTE=darunner;47014101]The Zhukov stock looks too much like the AK-12 stock, which I don't like at all. The AK MOE is nice, but I'd like something adjustable.[/QUOTE] Why? I don't think you'll find much besides maybe that Archangel stock, the Mako Tactical stock, a few AR stocks, and the hideously overpriced and prone to break at the hinges Zenit stock. If you put optics on an AK, you adjust your face, not the stock :V In Capitalist Amerikastan, you adjust to rifle, rifle does not adjust to you!