Took some pictures of a few of my guns today, thought I'd share.
[thumb]http://i.imgur.com/arOKEqT.jpg[/thumb]
[thumb]http://i.imgur.com/f9dCK8K.jpg[/thumb]
[thumb]http://i.imgur.com/5WAi8SZ.jpg[/thumb]
[thumb]http://i.imgur.com/SYWe7PK.jpg[/thumb]
[thumb]http://i.imgur.com/pEhVW15.jpg[/thumb]
[QUOTE=Death King83;48255637][thumb]http://i.imgur.com/SYWe7PK.jpg[/thumb][/QUOTE]
I've always liked your shotgun. It's a pardner pump, right? Where did you get the foreend?
[QUOTE=mastermaul;48256149]I've always liked your shotgun. It's a pardner pump, right? Where did you get the foreend?[/QUOTE]
Yeah it's a Pardner Pump with the shorter barrel, original stock with a piece of bike innertube over the grip, and a metal heat shield on the barrel. The sling is a chinese sks sling. The forend I got on ebay.I think it's made by Choate. There are a lot like it. I got it in a package deal with an 870 pistol grip as well that I dont have the correct length of screw to install unfortunately.
Basically any remington 870 accessories will fit a Pardner Pump.
[thumb]http://i.imgur.com/Zes3RL1.jpg[/thumb]
I wish i could find a beat to shit wooden stock set to put on, preferably an old police stock forend.
G'day mate didn't know they spoke German in Austria, crikey.
I didn't see any in there but do you have or have you ever had the opportunity to get 9x39?
I'd like to figure out how to duplicate 9x39mm. I think it'd be a relatively straightforward job to ream out an AK system rifle for it, I think it would run fine without modification after widening the chamber.
Someday I'll own a 9x39 Groza, even if I have to build it all from scratch. :v:
I have a friend who works with a gunsmith who specializes in integral suppressors, he built a Mosin with one for kicks. I'll get a picture if I ever see the rifle again. Wouldn't be cheap but it'd be cool. The Groza would be easier than a VSS or VAL clone since the Groza is a reconfigured AK.
When I'm done with my current project I'll look into how much this would cost, could be fun. Might be able to start with one of those Century bullpups? I've thought about this before but got distracted by other stuff.
There's an airsoft Groza cloned from the real thing so I could look into getting/borrowing one and cloning the aesthetic parts off of it in our shop. People theorized for a while that the trigger was some kind of odd Soviet witchcraft but it looks like it's basically identical to every other bullpup AK conversion, so I think the main obstacle would be the Groza-specific parts like the carry handle and the removable trigger pack.
[QUOTE=PrusseLusken;48259617]
[T]https://dl.dropboxusercontent.com/u/22107915/Patroner/Foto%2021072015/10%20Eksperimentelle.JPG[/T]
Experimental, limited use or otherwise special rounds. 9x51mm SMAW Spotter, Swiss experimental blank in their oddball calibre, .22-250 Etron-X, 4,73x33 HK G11 and some other stuff. Obviously neither 6,8 SPC or .300 Whisper are experimental but they're interesting enough to be included. Notice also the 4,6x36 Löffelspitz. Has a HK headstamp
[/QUOTE]
Damn, how did you manage to acquire a 4.73×33mm round? Always liked the G11, ammo being one of the reasons since it fired caseless.
Our Assaultmen have a strange desire to get a kill with their spotting rifles of the SMAW, I personally would rather just shoot some one with the rocket. I ,being a Machine Gunner, would love to get my hands on a mystical 7.62x51mm SLAP round.
[QUOTE=jgerm529;48261331]Our Assaultmen have a strange desire to get a kill with their spotting rifles of the SMAW, I personally would rather just shoot some one with the rocket. I ,being a Machine Gunner, would love to get my hands on a mystical 7.62x51mm SLAP round.[/QUOTE]
Is the spotting rifle even approved for engaging enemy personnel?
I honestly have no idea, aside from how inefficient it would be I don't see why it wouldn't be authorized.
[editline]21st July 2015[/editline]
Especially since typically whatever you're shooting with the spotting rifle you're going to be following up with a rocket shot I don't see it being an issue.
[QUOTE=PrusseLusken;48261911][t]http://i.imgur.com/Q0vAVMU.jpg[/t]
:-)
not mine, a friend got lucky and stumbled over it in a mixed box of very common rounds.
[editline]21st July 2015[/editline]
headstamp 0 616 0
00 being 2000 for manufacture
616 being swedish headstamp for "imported to sweden, made by winchester"[/QUOTE]
So that's what those mystical beasts look like! Thank you for sharing, I've read they were developed alongside 50 BMG SLAP but that the 7.62 was a bit of a failure. I've heard though that in a warehouse somewhere we have crates of belted 7.62 SLAP in case of WWIII.
[QUOTE=jgerm529;48261331]Our Assaultmen have a strange desire to get a kill with their spotting rifles of the SMAW, I personally would rather just shoot some one with the rocket. I ,being a Machine Gunner, would love to get my hands on a mystical 7.62x51mm SLAP round.[/QUOTE]
I remember reading that unlike the 50BMG SLAP, the 7.62mm SLAP was never put into production because of some problem with the penetrator twisting and striking wall of the barrel when fired.
[QUOTE=Psychokitten;48261354]Is the spotting rifle even approved for engaging enemy personnel?[/QUOTE]
If I remember correctly, this is where the misconception comes from where some people believe that it is against the Geneva Convention to shoot people with the .50 (obviously not true). I think it stemmed from the fact that shooting people with a spotting rifle just draws attention to the rocket crew who they are supposed to be "spotting" for. :v:
[QUOTE=PrusseLusken;48260458]Should make an AK-9
[img]http://i2.guns.ru/forums/icons/forum_pictures/000789/789402.jpg[/img]
Bought it from a fellow collector. Guy is as fudd as can be, collects only old Norwegian black powder rounds and doesn't give a shit (read: doesn't know shit) about modern cartridges. I bought it for.. 25 NOK, 3 USD, since he had no idea what it was and couldn't care less.
I really want the dummy version too (olive plastic).[/QUOTE]
Oh wow, crazy how rounds like that just randomly pop up. Still wanting to know what happened to the G11, around a thousand were made, ammo is super rare, but gotta be a lovely collectible.
Finally got the C93. The gun's internals were caked in crud. Not cosmo, but caked on burnt powder. Nothing an hour, a bottle of hoppe, and a toothbrush can't fix.
This thing was on consignment and it seems the original owner didn't bother cleaning it. The folding stock seems unused. I get the feeling the original owner bought it in the scare, threw a folding stock on it and tried to sell it for like $1000 at one point. Now that the scare has passed, he just tried to get any thing out of it.
Mags are a little tough to shove in and pull out.
[QUOTE=Pilot1215;48264136]Oh wow, crazy how rounds like that just randomly pop up. Still wanting to know what happened to the G11, around a thousand were made, ammo is super rare, but gotta be a lovely collectible.[/QUOTE]
you'd be shit outta luck if you're in Canada, though, because it's banned there by name :v:
[QUOTE=ultra_bright;48267047][img]http://i.4cdn.org/k/1437535342988.png[/img]
[img]http://i.4cdn.org/k/1437561496239.jpg[/img][/QUOTE]
"Thankyou officer for protecting me from myself"
So, got the Cobra 380 today, works like a charm.
Did you have to brush out metal shavings and shit? Magazine give you any trouble?
e: Wait, is it a CA/FS380 or a Denali 380? I assumed the latter since it was 99 bucks.
[QUOTE=Grenadiac;48269069]Did you have to brush out metal shavings and shit? Magazine give you any trouble?
e: Wait, is it a CA/FS380 or a Denali 380? I assumed the latter since it was 99 bucks.[/QUOTE]
FS380, No metal shavings, Magazine was pretty nice as well. I hate the mag release though. I'll post a picture of it in a little bit.
[img]http://i.imgur.com/SQ4HuQu.jpg[/img]
Wood guys finished my C96 stock. I'll post more pictures when I go pick it up (pictured pistol belongs to them)
[QUOTE=Ridge;48271140][img]http://i.imgur.com/CBbMjp4h.jpg[/img][/QUOTE]
[img]http://i.4cdn.org/k/1437602824093.jpg[/img]
[img_thumb]http://i.4cdn.org/k/1437615706753.jpg[/img_thumb]
[media]https://www.youtube.com/watch?t=43&v=LUCRamTAJEY[/media]
They are arresting kids literally holding sticks in pictures.....
What exactly does a "weapon sweep" consist of? Do they just walk through homes looking for stuff, or is this like a LEO liter cleanup and they find this stuff on the streets?
[QUOTE=Grenadiac;48271257][img]http://i.imgur.com/SQ4HuQu.jpg[/img]
Wood guys finished my C96 stock. I'll post more pictures when I go pick it up (pictured pistol belongs to them)[/QUOTE]
So do you own a c96 or are you just getting the stock of one? haha cause it'd be silly to just get the stock alone.
[QUOTE=zach1193;48276585]So do you own a c96 or are you just getting the stock of one? haha cause it'd be silly to just get the stock alone.[/QUOTE]
Do you not see the bottom of the picture...?
He mentioned the c96 belonged to someone who else.
He has one. He's posted several pages back with it.
Sorry, you need to Log In to post a reply to this thread.
