Post Your Guns V3. Ak's and M4's as usual edition - General

I thought it was broken when I first saw it.

it has an aks74u rear sight WHAT WHAT

oh god I laughed so hard at the aks rear sight

[QUOTE=WubWubWompWomp;33441228]Why do you tape the bottom of your mags? Extra grip, indicate the type of ammo? What?[/QUOTE] some people do it because their mags wobble in the magwell.

[QUOTE=Ccharlton;33442946][IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/314499_2772301986488_1226165737_3287978_1228273368_n.jpg[/IMG] This became mine for 20 bucks and a AK drum mag. In essence it's a custom hicapa with a TM AK hop up nub and just pure sex, shoots far and accurate and as soon as I make a kydex holster for it will be joining it's way as my dueling pistol of choice.[/QUOTE] Have fun with that thing constantly snagging on your holster when you go to draw it.

What have I done!? [IMG]http://img853.imageshack.us/img853/1900/img0454yy.jpg[/IMG] [IMG]http://img600.imageshack.us/img600/8898/img0456g.jpg[/IMG]

[QUOTE=Vityaz;33450014]What have I done!? [IMG]http://img853.imageshack.us/img853/1900/img0454yy.jpg[/IMG] [IMG]http://img600.imageshack.us/img600/8898/img0456g.jpg[/IMG][/QUOTE] I'm completely and fully okay with this.

Im fully AK with this.

[QUOTE=Vityaz;33450014]What have I done!? [IMG]http://img853.imageshack.us/img853/1900/img0454yy.jpg[/IMG] [IMG]http://img600.imageshack.us/img600/8898/img0456g.jpg[/IMG][/QUOTE] If you weren't aware yet, IFAP is now fully ok with tactical AKs as long as they're practical like this. Where did you get that handguard by the way?

[QUOTE=Vityaz;33450014]What have I done!? [IMG]http://img853.imageshack.us/img853/1900/img0454yy.jpg[/IMG] [IMG]http://img600.imageshack.us/img600/8898/img0456g.jpg[/IMG][/QUOTE] Tacticlol done right

the only thing I dont like is the vert grip. that one is really uncomfortable.

[QUOTE=Taepodong-2;33450156]If you weren't aware yet, IFAP is now fully ok with tactical AKs as long as they're practical like this. Where did you get that handguard by the way?[/QUOTE] Here is the exact one I bought [url]http://www.opticsplanet.net/caa-tri-rail-lower-handguard-for-ak47-74.html[/url] It's just a re-brand from an Israeli company, and I've seen these a lot on Russian AKs.

Just picked up 2 CM.047D's (AK102/105). Going over to TaiwanesePricks house soon to work on a review, get some pics, and do some speed reloads.

[QUOTE=Vityaz;33450257]Here is the exact one I bought [url]http://www.opticsplanet.net/caa-tri-rail-lower-handguard-for-ak47-74.html[/url] It's just a re-brand from an Israeli company, and I've seen these a lot on Russian AKs.[/QUOTE] You think that will fit on CYMA AKs?

[QUOTE=milkandcooki;33450734]You think that will fit on CYMA AKs?[/QUOTE] I just put it on my CM036 and it's a little snug, but it still fits.

Hmm I wonder if anyone makes polymer RPK stocks I could make a RPK74m

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/380314_2757933632620_1386135729_33071337_1761094395_n.jpg[/IMG] Ladies and gentlemen, I've joined, and Ender's finally rejoined: the AK club.

inb4 rails errywhere

[QUOTE=Stupideye;33453872]inb4 rails errywhere[/QUOTE] No rails on mine just yet ;)

[QUOTE=TaiwanesePrick;33453778][IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/380314_2757933632620_1386135729_33071337_1761094395_n.jpg[/IMG] Ladies and gentlemen, I've joined, and Ender's finally rejoined: the AK club.[/QUOTE] Do what Vityaz did but put Eotech on gas tube

[QUOTE=Vityaz;33450014]What have I done!? [IMG]http://img853.imageshack.us/img853/1900/img0454yy.jpg[/IMG] [IMG]http://img600.imageshack.us/img600/8898/img0456g.jpg[/IMG][/QUOTE] What brand AK did you use? I need a Christmas gift and I have nothing. So maybe I'll do this. It's either that or I get a SIG 266 and an AKS74U/AKM but I can't pick.

[QUOTE=Riley;33447702]Have fun with that thing constantly snagging on your holster when you go to draw it.[/QUOTE] You mean the one i'm currently making for it out of kydex that only goes around the barrel and trigger and no where near the rear iron sight? I can see that being a real big problem. Also untill I get a high flow valve the iron sight is off :(, if I can find a cheap plastic one for the time being i'm happy.

AK-102s. Orange flash hider caps to be removed soon. [img]http://img854.imageshack.us/img854/5981/dsc0148bh.jpg[/img]

[QUOTE=xXEnder007Xx;33455239]AK-102s. Orange flash hider caps to be removed soon. [img]http://img854.imageshack.us/img854/5981/dsc0148bh.jpg[/img][/QUOTE] We're so cute; we have matching guns :3

[QUOTE=CodeMonkey3;33454735]What brand AK did you use? I need a Christmas gift and I have nothing. So maybe I'll do this. It's either that or I get a SIG 266 and an AKS74U/AKM but I can't pick.[/QUOTE] It started out as a VFC AKS-74, then I put some real steam 74M furniture on it.

hey vit, could you do me a favor and put your specterDR on it, i wanna see what that looks like

[QUOTE=xXEnder007Xx;33455239]AK-102s. Orange flash hider caps to be removed soon. [img]http://img854.imageshack.us/img854/5981/dsc0148bh.jpg[/img][/QUOTE] Speaking of removing orange caps, what's the best way to get it off a CM040? Just use pliers or what?

Not sure about the CM040, but if it's just that plastic cap pry it off with some good size pliers. That's what I did to my old CM035 years ago, worked fine.

[QUOTE=venom;33456109]hey vit, could you do me a favor and put your specterDR on it, i wanna see what that looks like[/QUOTE] Here you go. [img]http://img338.imageshack.us/img338/8598/img0460cy.jpg[/img]

What I did to mine was: Acquire hacksaw Cut notch into side of orange Acquire flathead screwdriver Pry that shit