Okay, never reuse bbs. Never shoot indoors. Always assume a firearm - even airsoft- is loaded and dangerous.
Would you mid posting a link to the bbs you found online?
[QUOTE=Fish Muffin;35893263]Okay, never reuse bbs. Never shoot indoors. Always assume a firearm - even airsoft- is loaded and dangerous.
Would you mid posting a link to the bbs you found online?[/QUOTE]
Got it. Question: Is it okay to shoot indoors as long as I can clear an area of breakable stuff, and make a little shooting range, or is indoors a complete no-no?
And this is the store I bought from: [url]https://www.garderoben.se/airsoftvapen-c-146-1.aspx[/url]
Although I went to their physical store. It's Swedish though, so it's maybe not a whole lot of use for everyone.
I think shooting indoors is fine as long as you're not stupid about it. Making a little range should be fine, just don't shoot at anything solid. Use a bunch of cardboard boxes or a pillow or something.
I have a cardboard box under my bed that's full of foam and other empty boxes that i use to shoot into when i need to test if something's working properly.
nothing wrong with shooting indoors as long as you have eye protection and you are shooting in a controlled area (no random people/animals walking around you)
[QUOTE=FloaterTWO;35893352]I think shooting indoors is fine as long as you're not stupid about it. Making a little range should be fine, just don't shoot at anything solid. Use a bunch of cardboard boxes or a pillow or something.
I have a cardboard box under my bed that's full of foam and other empty boxes that i use to shoot into when i need to test if something's working properly.[/QUOTE]
pillows and stuffed animals work
yea
ill stuff those animals with my bb's of fury
Planning on getting my first Airsoft gun: deciding between CMYA M14 with wood imitation (AEG, 400 FPS, runs smooth) or a CMYA Enhanced 2012 AK47 (AEG, 350-400 FPS, 670 round mag, and cheaper than M14). Agree for M14, Disagree for AK. Links for both: M14:[url]http://www.airsoftmegastore.com/CYMA_Full_Metal_Gearbox_M14_SOCOM_Wood_AEG_CM_032A_p/cyma-cm032a-wood.htm[/url] AK47:[url]http://www.airsoftmegastore.com/CYMA_V3_AK47_Metal_Gearbox_AEG_CM028_p/cyma-cm028.htm[/url]
don't buy from airsoft megastore
Why?
[QUOTE=the_killer24;35893717]don't buy from airsoft megastore[/QUOTE]
Don't do it. I ordered a 416 crane stock from them. All the clips on the buttplate were broken, and the finish on the stock itself was very worn and seemed used.
[QUOTE=gottifour;35893545]Planning on getting my first Airsoft gun: deciding between CMYA M14 with wood imitation (AEG, 400 FPS, runs smooth) or a CMYA Enhanced 2012 AK47 (AEG, 350-400 FPS, 670 round mag, and cheaper than M14). Agree for M14, Disagree for AK. Links for both: M14:[url]http://www.airsoftmegastore.com/CYMA_Full_Metal_Gearbox_M14_SOCOM_Wood_AEG_CM_032A_p/cyma-cm032a-wood.htm[/url] AK47:[url]http://www.airsoftmegastore.com/CYMA_V3_AK47_Metal_Gearbox_AEG_CM028_p/cyma-cm028.htm[/url][/QUOTE]
That M14 is cheaper on AirsoftGI, and I can tell you right now it doesn't shoot 400. Stock, it gets 330 at best. The CM028, that AK you posted, is about 350, and also cheaper (once shipping is factored in) on AirsoftGI.
I'd go for the M14 over the AK. But it's going a bit heavier lol
Am I the only one who uses .12 for their old springers and reuses them cause it doesn't really matter for a springer?
The CYMA M14 is MUCH better than the CM028. And the CM028 is [I] definitely[/I] not shooting 350-400. More like 290-310. It's also of shit-tastic quality.
M14 all teh way.
Hey guys, I'm getting a Dboys SCAR-H because its owner couldn't hold onto it any more and wanted it to be in good hands :v:
do people just throw their old unwanted guns at you
i want people to throw their old unwanted guns at me :C
[QUOTE=the_killer24;35896983]do people just throw their old unwanted guns at you
i want people to throw their old unwanted guns at me :C[/QUOTE]
you dont appear poor enough.
if i put my 3 machine guns away and use solely my trishot for 6 months do you think people will throw guns at me
[QUOTE=the_killer24;35897065]if i put my 3 machine guns away and use solely my trishot for 6 months do you think people will throw guns at me[/QUOTE]
Most definitely.
then after 6 months i'll show up with all the guns and be all like 'aahhahahaha you guys suck i never sold my MGs'
[QUOTE=the_killer24;35897065]if i put my 3 machine guns away and use solely my trishot for 6 months do you think people will throw guns at me[/QUOTE]
It's a curse, don't wish it upon yourself. I have way too much shit now.
[QUOTE=felix the cat;35897463]It's a curse, don't wish it upon yourself. I have way too much shit now.[/QUOTE]
but I have a Dboys M4SD so people will always feel bad and throw guns at me.
Oh. Well I have:
1x custom M4 (too much aftermarket shit to even call it a certain brand)
1x G&G FNC*
1x KJW 10/22*
1x TM HiCapa 5.1*
1x TM Glock 17*
3x WA 1911 (one is in parts and missing like 2 pieces)*
2x V2 gearboxes w/ more than enough parts to complete them
Various M16/M4 external parts (enough for more than a whole gun)
1x AKS74 (guy never came to get it after I fixed it)
Giant pile of inner barrels, hop ups, gears, pistons, piston heads, motors, etc.
*Things I actually bought
all I have is:
G&G M4 that I put an m16 outer/inner barrel on/in
KJW KP08 that I bought yesterday.
some clear Walmart shotgun that Herf and I painted black
and the mangled remains of my JG G36c which I'm still debating whether I want to sell or rebuild
[QUOTE=Wulfram;35897582]
and the mangled remains of my JG G36c which I'm still debating whether I want to sell or rebuild[/QUOTE]
rebuild dat shit
[QUOTE=felix the cat;35897615]rebuild dat shit[/QUOTE]
I need a piston, piston head, inner barrel, and the entire front assembly.
Well, now I've got:
SRC T91
CYMA AK105
Dboys M4SD
CA SCAR-L
Dboys SCAR-H
TM Hicapa 4.3
HNNNNNNNNNNNNNG WHY CANT I HOLD ALL THIS VARIETY
[QUOTE=Wulfram;35897633]I need a piston, piston head, inner barrel, and the entire front assembly.[/QUOTE]
Why do you need a whole front assembly? Did you fall on it or someshit?
[QUOTE=felix the cat;35897700]Why do you need a whole front assembly? Did you fall on it or someshit?[/QUOTE]
didn't you make a front assembly out of home depot parts? :v:
I opened it up to take the barrel out, but I had no idea how to put it back together and I lost all the pieces. I gave the inner barrel to herf.
Sorry, you need to Log In to post a reply to this thread.
