Post Your Guns V3. Ak's and M4's as usual edition - General

Become the new Jat plz.

killers shimming guide very improtat: systtmea shims r teh best u gotta buye 6 bbages of them so u gota take ur gerbox apart then u put 1 bag of shims on the top axle of each gear then u put 1 bag of shims on the botom axel of eche gera then u put gerbxose bac 3gether then urdon!!

[QUOTE=the_killer24;37405658][IMG]http://i269.photobucket.com/albums/jj66/the_killer23/P1000442.jpg[/IMG] help im [B][U][I]DROWNING IN GUNS[/I][/U][/B][/QUOTE] That 416 is really nice.

[QUOTE=TankMan;37409820]That 416 is really nice.[/QUOTE] imho it looks really bland because its supposed to be a ~~~NAVY SEAL~~~ 416

it is it has a stripped tappet plate but w/e that gun wouldn't even be in my house if it was functioning I do like how he didn't take off the specterdr (fixed redgreen) before handing the gun in though im going to be staring through that thing all week

That long SCAR is mmmmmmmmmmmm.

the thing wrong with it (longinator 5000) was that it had terrible compression and the bbs were farting out of the barrel checked bucking, fine took out gearbox to check, nozzle and tappet were fine then looked at the bottom of the nozzle and there was a big scratch turns out the previous tech (you may have read about him in airsoft idiots) tightened a screw too far and that was grinding against the bottom of the nozzle and making it seize up also a wire came apart from the kid folding it too many times but that was a quick solder [editline]25th August 2012[/editline] taking apart the SR10 (kid just wants it front wired, literally brand new, warranty not even expired) and i see this [IMG]http://i269.photobucket.com/albums/jj66/the_killer23/P1000443.jpg[/IMG] it's an airsoft gun not a house why are the wires so BIG [editline]25th August 2012[/editline] he put heat shrink OVER the part where the QD connectors join what the actual fuck

why the fuck would you even

now I know why he wanted me to front wire there is no battery capable of coexisting with a PTS brand PTS MOE stock and that fucking gigantic wire harness

I found a use for the double side mount AK rail [img]https://sphotos-a.xx.fbcdn.net/hphotos-ash4/399700_4645465619740_1551047330_n.jpg[/img]

[QUOTE=TaiwanesePrick;37411445]I found a use for the double side mount AK rail [img]https://sphotos-a.xx.fbcdn.net/hphotos-ash4/399700_4645465619740_1551047330_n.jpg[/img][/QUOTE] If the day does not require you to use this, the day is good.

[QUOTE=Taepodong-2;37411484]If the day does not require you to use this, the day is good.[/QUOTE] [video=youtube;QWfbGGZE07M]http://www.youtube.com/watch?v=QWfbGGZE07M[/video]

[QUOTE=the_killer24;37405658][IMG]http://i269.photobucket.com/albums/jj66/the_killer23/P1000442.jpg[/IMG] help im [B][U][I]DROWNING IN GUNS[/I][/U][/B][/QUOTE] what brand 416 is that?

vfc

damn

[B][U][I]pain in the ass[/I][/U][/B] to take apart though

So i got an AK for cheap off a friend. decide to go Saiga on this bitch. Oh shit, page king. [IMG]http://img402.imageshack.us/img402/7226/c36020120827075918.jpg[/IMG] * Cut up some old 552 mag. [IMG]http://img716.imageshack.us/img716/4434/c36020120827080749.jpg[/IMG] Retractable stock that I probably wont use. [IMG]http://img43.imageshack.us/img43/7210/c36020120827075938.jpg[/IMG] Look at these two whores. [IMG]http://img33.imageshack.us/img33/8528/201208271821233331.jpg[/IMG] And a not really airsoft but this plaque I made for my brother last year. [IMG]http://img18.imageshack.us/img18/8260/c36020120827095004.jpg[/IMG] thoughts...?

Could you explain how you cut up that sig mag to a newbie?

First you get a knife, then you take the mag and a cutting board and cut it into 10-15 thin slices, place on sandwich as much as you want. For storage save the rest in a plastic bag for later and put them in your fridge. You're now done! Enjoy!

[QUOTE=noneshallpass;37434279]Could you explain how you cut up that sig mag to a newbie?[/QUOTE] [IMG]http://img801.imageshack.us/img801/9647/201208280504598161.jpg[/IMG] All i did was saw off the little edge on the left. it fits perfectly. But it wont feed.

[QUOTE=Ninja Duck;37289947]DBoys RK02 [img]http://niggaupload.com/images/xDRq.jpg[/img][/QUOTE] [IMG]https://dl.dropbox.com/u/26134258/2ca67fe0e15834cf985e1e604e5d75e0.png[/IMG] ~bLue gunz fo lyf~

For some reason two tone makes me cringe.

That gun right there is an example of two-tone done right. Fluorescent orange or green guns are awful, but there's nothing cringeworthy about guns done decently like that.

[QUOTE=icypain;37438999][IMG]http://img801.imageshack.us/img801/9647/201208280504598161.jpg[/IMG] All i did was saw off the little edge on the left. it fits perfectly. But it wont feed.[/QUOTE] It probably doesn't feed because the feed lips dont line up.

[QUOTE=ossumsauce;37441742]It probably doesn't feed because the feed lips dont line up.[/QUOTE] Yea thats what I was talking aboot. I don't really care though. i don't really play airsoft that much.

[QUOTE=Northy66;37440319]For some reason two tone makes me cringe.[/QUOTE] meanwhile in england [img]https://sphotos-a.xx.fbcdn.net/hphotos-prn1/15536_195673018592_7020375_n.jpg[/img]

ew

I CAN FEEL MY TESTICLES RETRACTING

yuck, must suck to airsoft in england: ICANSEEYOU!

[QUOTE=The Ultimate;37449947]yuck, must suck to airsoft in england: ICANSEEYOU![/QUOTE] probably only if nobody at your field has second hand guns or ukara though