God dammit I wish my relatives knew anything about airsoft so they would buy me airsoft stuff :<
[QUOTE=dwt110;38970282]y is it like
2 tone
i dont want a 2tone m60[/QUOTE]
Shut the hell up.
Also those m60's are bricks. 11.1 for 3 years and no damage.
[QUOTE=BBOOBBYY!;38972265]God dammit I wish my relatives knew anything about airsoft so they would buy me airsoft stuff :<[/QUOTE]
my relatives don't know shit about airsoft
last year I got a surefire M900L and my parents were like omg we spent 400 bucks on it why don't you like it
Bwah. They wouldn't EVER think about even giving me these 400 bucks (well, 1230 pln) for xmas.
And the gun I want is around 400 bucks (talking about A&K M249, I know it's like $280 on Evike but HELLO POLAND) if I tried asking for it, they'd just yell at me. Because they can't spare this kind of massive money for something your kid would be sure to love, use and sleep with, but they surely can afford $4000 worth of audio system that noone fucking uses. Except for me, like once per month when I feel like doing so. But I ain't no audiophile, I'm perfectly fine with my computer speakers or headphones.
fuck I'm almost going taep.
[t]http://filesmelt.com/dl/HPIM1153.JPG[/t] Just got my new gun, excuse the bad camera.
[QUOTE=dwt110;38970282]y is it like
2 tone
i dont want a 2tone m60[/QUOTE]
That's the Parkerized finish and all Mk43s look just like that.
[t]http://i.imgur.com/y6hJZ.jpg[/t]
hi
My AK74 along with its food pouches
[t]http://uppix.net/f/e/8/87e78459af00f72f9f465abe0b3b0.jpg[/t]
[QUOTE=deathmog;38983667][IMG]http://farm9.staticflickr.com/8172/8052454401_95f53d4ed6_c.jpg[/IMG]
Retoast[/QUOTE]
[IMG]http://farm8.staticflickr.com/7271/8156147134_c15619c77c_c.jpg[/IMG]
Same gun
selector switch
where u go
[QUOTE=dwt110;38985379]selector switch
where u go[/QUOTE]
Not really sure you need one on an AK.
Magazine out safety on, magazine in safety off.
[editline]27th December 2012[/editline]
Think Russian.
back when I had my KWA USP Tactical and ICS SIG551
[IMG]http://i1336.photobucket.com/albums/o644/dwt110/Screenshot2012-12-27at54304PM_zps0dc7b313.png[/IMG]
classy as fuck
I love my new KWA so much I just finished both of my cans of green gas :v:
So... I traded my good friend his NCStar red dot for my eotech, and I tried to take it home and put it on my famas, when I realized my low-profile 1" scope rings... didnt fit. So I had to use the high profile ring that came with the red dot on my already high profile famas, and...
[img]https://dl.dropbox.com/u/94406845/photo%2827%29.JPG[/img]
yyyeah...
what brand famas
Cybergun. Its kind of crappy, but I didn't feel like shelling out $300+ for a tokyo marui that would perform even crappier.
The internals are like a clock, one mis-placed piece and the entire thing is fucked. My ironsights are crooked because of a fubar from my own customization of the weapon (but I dont really use the ironsights anyways). The magazine feeds only half the time, the hand guard is a bitch to get on, the v1 gearbox is a little cunt nozzle and whole thing just feels like its gonna fall apart.
I really only got it for the price (because I had to factor in my gear) and because I really really really like the look of the famas, and wanted to be at least somewhat unique. My first airsoft rifle ever was a spring famas so it was kind of symbolic since this was my first legit AEG aside from starters.
[editline]27th December 2012[/editline]
I recently got a shitty cheap camera for christmas that I was gonna duct tape to my helmet because I'm too poor to afford a go pro and I was gonna record a few matches of me and 0fucksgiven + friends this coming saturday, so hopefully you can see me use it in action.
[QUOTE=Desert Rat;38999196]Cybergun. Its kind of crappy, but I didn't feel like shelling out $300+ for [B]a tokyo maraui that would perform even crappier.[/B]
[/QUOTE]
u wot m8
tokyo mario
[QUOTE=Timebomb575;38999322]u wot m8[/QUOTE]
From what I had heard, the TM famas was pretty much the same if not crappier than the cybergun one, but who knows, maybe I'm totally wrong.
[sp]probably totally wrong[/sp]
Doesnt matter it was sold out when I made my purchase anyways v:v:v
[QUOTE=Desert Rat;38999377]From what I had heard, the TM famas was pretty much the same if not crappier than the cybergun one, but who knows, maybe I'm totally wrong.
[sp]probably totally wrong[/sp]
Doesnt matter it was sold out when I made my purchase anyways v:v:v[/QUOTE]
The outside plastic is the same squeaky crap, but the TM is much better. Lower fps, but significantly better hopup.
[QUOTE=Desert Rat;38999377]From what I had heard, the TM famas was pretty much the same if not crappier than the cybergun one, but who knows, maybe I'm totally wrong.
[sp]probably totally wrong[/sp]
Doesnt matter it was sold out when I made my purchase anyways v:v:v[/QUOTE]
actually, one of the taiwanese airsoft magazines i lent ender compared the cybergun to the TM and confirmed that the cybergun is actually a tad better.
[editline]27th December 2012[/editline]
performance-wise, at least. the hopup doesn't make that much of a difference if you're not picky
I'm not. I just started really getting into airsoft because I finally found a place TO airsoft and got some funds for it. I got it knowing it was just an intermediate at best weapon, but like I said, I just love the famas.
I was planning on doing a stanag conversion for it in the distant future when I got new rifles and stopped using it, that way if I royally fuck it up it wont matter as much :v:
[QUOTE=TaiwanesePrick;38999576]
performance-wise, at least. the hopup doesn't make that much of a difference if you're not picky[/QUOTE]
AAAAAAAAAAAAAAARRRRRRRRRRGGGGGGGGGGGGGGGGHHHHHHHHHHHHHH
What have I done?
[img]http://i.imgur.com/p9tqc.jpg[/img]
[img]http://i.imgur.com/EqNm5.jpg[/img]
Got a possible attachment my friend and I are designing for our XM8s. I found this picture of the XM8 in Malaysia and noticed the full top rail. I figured I could try to make one.
[img]http://img.photobucket.com/albums/v432/camneus/xm8malaysia_01.jpg[/img]
We spent yesterday measuring the gun out and drawing this rail, maybe about 2 hours of work to make this. Sent it out for some manufacturing quotes. 3D printed out of black ABS would cost around $210, while having it cut on a CNC milling machine would cost $885. Sure as hell aren't going to have it machined at that price, but we may go for a 3D print just to test the prototype.
[URL=http://imgur.com/VsCCf][IMG]http://i.imgur.com/VsCCfl.jpg[/IMG][/URL]
[URL=http://imgur.com/zGrj4][IMG]http://i.imgur.com/zGrj4l.jpg[/IMG][/URL]
[URL=http://imgur.com/Am85y][IMG]http://i.imgur.com/Am85yl.jpg[/IMG][/URL]
Rough edit of what it would look like.
[URL=http://imgur.com/ZuPLa][IMG]http://i.imgur.com/ZuPLal.png[/IMG][/URL]
Good god...
Sorry, you need to Log In to post a reply to this thread.
