Buy, Sell, Trade Thread V.1 ~In Loving Memory of Upnushi~
1,133 replies, posted
[QUOTE=The Ultimate;38469222]good deal for such a worn gun[/QUOTE]
what
what would i even use a FPG for
i'll answer that for you
i wouldn't
besides my F2000 is not worn
not by any stretch of the imagination
[QUOTE=ossumsauce;38469331]what
what would i even use a FPG for
i'll answer that for you
i wouldn't
besides my F2000 is not worn
not by any stretch of the imagination[/QUOTE]
IMO, the F2000 is worn because JEGUS DICK the charging handle is broken, thats kind of a big deal, and not easily replaced/fixed. Also, the F2000 is super awkward and I hear they are finicky with mags.
0/10 would not stanag
[QUOTE=/Vandy/;38469440]IMO, the F2000 is worn because JEGUS DICK the charging handle is broken, thats kind of a big deal, and not easily replaced/fixed. Also, the F2000 is super awkward and I hear they are finicky with mags.[/QUOTE]
i will concur on all points
it's certainly not new
and it's definitely in used condition
but worn?....thats going a bit far
[QUOTE=ossumsauce;38469612]i will concur on all points
it's certainly not new
and it's definitely in used condition
but worn?....thats going a bit far[/QUOTE]
I just mean theres a big, noticeable, and irreplaceable part that is broken, and should account for a lot of the visual wear and indicate lots of use.
Its pretty worn
:/
while i personally disagree, due to public opinion i'll lower the average price to $200
happy?
[QUOTE=ossumsauce;38470095]:/
while i personally disagree, due to public opinion i'll lower the average price to $200
happy?[/QUOTE]
That's much more reasonable, however, do you still have the piece that broke off? That would make somewhat of a difference.
if you have the charging handle and the bits of it, it could POSSIBLY be fixed.
the charging handle on the F2000 is fucking useless
there's no cool factor to it either
except you know people want their gun in full working order with everything on it for the most part. Regardless of it being useless or a cool factor it affects value
Hmm. It might be laying around here somewhere. I'll search and report back.
[editline]16th November 2012[/editline]
Found it.
Nobody wants to offer? :(
I'm willing to take most anything, really!
ARs, AKs, pistols, PDWs, DMRs, etc etc.
I really just want this gone so i can make room for something a little more useful to me.
i would want it if it was black
[QUOTE=the_killer24;38480741]i would want it if it was black[/QUOTE]
ALL GUNS ARE BEAUTIFUL
NO MATTER WHAT YOU SAY
Not rabies update on my shotgun?
Why don't you just PM him? I know you're paying for him to tech your gun but you don't need to ask every few pages for him to update you on your gun.
[QUOTE=Ccharlton;38481467]Not rabies update on my shotgun?[/QUOTE]
Its gonna be a while because I still don't know of any place that sells metal for the pump's action bar. I'll probably start looking for something wood or plastic that will get the job done, but until then shit's on hold.
[QUOTE=CritNick;38481875]Why don't you just PM him? I know you're paying for him to tech your gun but you don't need to ask every few pages for him to update you on your gun.[/QUOTE]
Because PM's are for commies and commies hate america, DO YOU HATE AMERICA?
Also for some reason my pm's are gay and don't open and to be honest I try to keep it in this thread.
Consider selling me the full stock m870/m1100 hybrid of sexiness? Kidding of course.
A friend of mine is selling this stuff, and I can totally vouch for the quality:
[url]http://www.maapr.com/forum/viewtopic.php?f=35&t=21640[/url]
so uh
i probably will be trading for ossums f2000
so yeha
[QUOTE=the_killer24;38534306]so uh
i probably will be trading for ossums f2000
so yeha[/QUOTE]
Yep
This sexy babe right here is a saint and i love you
*kisses*
Anybody got some M4/CAR hand guards they'd be willing to part with? I want to have a set so my XM can be light on the front :V
[QUOTE=Back_Slash;38566182]Anybody got some M4/CAR hand guards they'd be willing to part with? I want to have a set so my XM can be light on the front :V[/QUOTE]
I have these if you want them
[img_thumb]http://i.imgur.com/jq4P6.jpg[/img_thumb]
How much you want for them? I don't have too much money right now. I can trade stuff like pouches and etc for them.
Or if you reallllllyy want to go crazy I can trade my m203 and cash for it. I hope it doesn't come to it.
[QUOTE=Back_Slash;38568966]How much you want for them? I don't have too much money right now. I can trade stuff like pouches and etc for them.
Or if you reallllllyy want to go crazy I can trade my m203 and cash for doesn't come to it.[/QUOTE]
Actually these have just been sitting around for months, so I'm up for pretty much any trades you have. What kinda of pouches and stuff do you have? And don't worry, your m203 is safe.
I have a condor multicam triple M4 mag pouch as well as multicam same make radio pouch. As well as some Condor AK/G36 pouches that are coyote brown Coming in double and triple.
I can get a picture if you want.
Right, I'm throwing this out to gauge interest. As fun as my SPAS-12 has been to work on, it's not really well-suited to the outdoor games I usually play, and is too bulky for me to carry two or three other guns at the same time, which is what I have usually done with shotguns. I also have a few other project ideas and some cash to fund them would be handy. So, since I'd hate to have such a unique piece languish on a shelf, I'm considering selling it.
As for what I'd include, it would be the gun, the Palmer's rig necessary to run it, my custom shell catcher (holds about 24 shells, has a zipper on the bottom for easy unloading), a whole bunch of spare parts to convert it back into a shorty M1100 or full length M1100 as desired, about 70 shells, and optionally the Palmer's rig. I'd also throw in some shell pouches and shell cards, enough to carry ~40 shells comfortably. I'd also be happy to provide documentation for disassembly and troubleshooting. The only thing you'd need to provide would be a CO2 or HPA tank, which can be purchased at any sporting goods store or paintball shop.
Just as a baseline for the total value of this project:
-TM SPAS-12- $200 (and out of stock)
-KTW folding stock- $75
-Maruzen M1100- $350
-70 shells- $~300
-Palmer's rig- $150
-Shell catcher, custom parts, testing and fitting- lots
So, since you guys have been supportive in helping me get this project done, I figured I'd put it up here first. Make me any reasonable offer and I'll consider it.
Sorry, you need to Log In to post a reply to this thread.