• Buy, Sell, Trade Thread V.1 ~In Loving Memory of Upnushi~
    1,133 replies, posted
nitrobabies rollin the nickels
[QUOTE=notrabies;39374112]Yeah okay fine, because I can't let it go to someone else.[/QUOTE] Splendid. We will discuss details tomorrow when I am not so exhausted.
[QUOTE=catbarf;39374462]Splendid. We will discuss details tomorrow when I am not so exhausted.[/QUOTE] Good plan, I'll feel better about spending this much after working my ass off again tomorrow at work and getting a good burger. But yeah, because my degree is cool enough that it gets me incounty tuition at school, my financial aid covers all tuition and fees, all of my books, and probably $450 to all of the cost of the SPAS.
i wanted that spas... :[ anyone have a [U]cheap[/U] m1100?
[QUOTE=Seagullman;39393737]i wanted that spas... :[ anyone have a [U]cheap[/U] m1100?[/QUOTE] Depends on your definition of cheap, but keep in mind that buying a used M1100 is rarely a good idea.
AUG and MP5K are sold for the record. Still have an MP001 and G&G PM5A4 Sportsline. And a G&P Aimpoint.
[QUOTE=notrabies;39393755]Depends on your definition of cheap, but keep in mind that buying a used M1100 is rarely a good idea.[/QUOTE] whats included? at most i want to spend 200, depending on amount of shells, etc.
[QUOTE=Seagullman;39393737]i wanted that spas... :[ anyone have a [U]cheap[/U] m1100?[/QUOTE] Let the bidding begin
[QUOTE=Seagullman;39394074]whats included? at most i want to spend 200, depending on amount of shells, etc.[/QUOTE] $200 is too low for any of mine, no thanks. If you really want to get in on Maruzen shotguns, buy a new one and do an assload of research on how to properly maintain it. Buying a used one is a great way of ensuring that you'll have dulled or broken parts that will screw you over near instantly. Unless you're a machinist, there are no replacements available for the parts that like to break. Of the three or four M1100's I've bought used, all of them have had or developed serious problems very quickly, whereas the three I've bought new are all still doing fine.
[QUOTE=notrabies;39394667]$200 is too low for any of mine, no thanks. If you really want to get in on Maruzen shotguns, buy a new one and do an assload of research on how to properly maintain it. Buying a used one is a great way of ensuring that you'll have dulled or broken parts that will screw you over near instantly. Unless you're a machinist, there are no replacements available for the parts that like to break. Of the three or four M1100's I've bought used, all of them have had or developed serious problems very quickly, whereas the three I've bought new are all still doing fine.[/QUOTE] and what is that? extractor and lifter? also i have 525 for the spas :) lol you have one ninjaduck?
[QUOTE=Seagullman;39395116]and what is that? extractor and lifter? also i have 525 for the spas :) lol you have one ninjaduck?[/QUOTE] Damage is much more extensive than those two parts, although they show it first. On green gas the receiver will eventually shatter, and while it will continue to function for a while, it eventually fails catastrophically. The shell gates wear quite a bit and require filing to be reshaped, and the gas line will almost always need some kind of work/replacement. Also considering a M1100 Revision is only $200 new, and you can buy large amounts of used shells for cheap there's really not much of a reason to get a used one.
[QUOTE=CottonTM;39393778]AUG and MP5K are sold for the record. Still have an MP001 and G&G PM5A4 Sportsline. And a G&P Aimpoint.[/QUOTE] I already got an MP5 from my friend, so I can't buy yours. Sorry.
[QUOTE=notrabies;39395295]Damage is much more extensive than those two parts, although they show it first. On green gas the receiver will eventually shatter, and while it will continue to function for a while, it eventually fails catastrophically. The shell gates wear quite a bit and require filing to be reshaped, and the gas line will almost always need some kind of work/replacement. Also considering a M1100 Revision is only $200 new, and you can buy large amounts of used shells for cheap there's really not much of a reason to get a used one.[/QUOTE] What do you think about a used maruzen 870, completely stock?
[QUOTE=YCheez;39397779]What do you think about a used maruzen 870, completely stock?[/QUOTE] If its fully functional then its most likely fine, but if they claim that anything is broken you should probably avoid for anything other than spare parts.
And with an HPA line? Also used WE G18c taken care of, only plinked for 6 months, comes with REAPS bucking, 25 and 50rd mags for olde-old xbox 360 I never use. Final go or no go?
you better do it. at the VERY least a WE wont get RROD.
[QUOTE=Apache249;39397707]I already got an MP5 from my friend, so I can't buy yours. Sorry.[/QUOTE] Np, thanks for letting me know anyways.
[QUOTE=YCheez;39397863]And with an HPA line?[/QUOTE] I really can't judge it without seeing it or more details on it. Are you equipped to deal with an external tank as well as the maintenance and labor it will require? If they've done an external conversion they may or may not have messed with the internals, and it is likely that it has seen a lot of shots.
[QUOTE=Heldure;39397884]you better do it. at the VERY least a WE wont get RROD.[/QUOTE] Well the 360 has been faithful for 3 years before going dormant for 1 and a half. And the WE has been plinked lightly for 6 months with some gas in the mags for the o rings and just recently been mag dumped for a firing vid. If it was a lemon then it would have shown about 5 months ago.
JUST TRADE FOR THE GLOCK ALREADY OH MY GOD WE SAID DO IT LIKE 50 TIMES ALREADY
Yeah stop spamming the thread and just buy the damned Glock, you've already answered your own question 5 times already, and we told you to do it! [I]do it[/I]
Ok, ok. Glock is a go.
If anyone ever happens to find a TM P90TR in mostly stock condition give me a holler. That's all I need to complete myself.
Anyone selling any type of 74u with other stuff? Been lookin around for one and it seems like this would be a good place to ask :v:
I'm selling a PTS beta AK, slightly modified.
How much? Black or Tan. Interested.
Isn't that the gun that takes proprietary mags?
if i recall it takes the masada magazines
no the beta project mag-k takes standard ak mags source:personal experience
the AKM masada is the one that takes only PTS ak mags afaik
Sorry, you need to Log In to post a reply to this thread.