just today i got a kwa sr5, and i had some questions about it. occasionally, when id been firing it at some cans, it would just stop firing completely. i would pull the trigger, i would feel something move a LITTLE, then nothing. i couldnt find a fix to this untill i disconnected the battery, waited 10 mins, then reconnected it. another thing, what batteries would fit into this? im trying to get at least a 10.6v.
[QUOTE=krazipanda;26963058]just today i got a kwa sr5, and i had some questions about it. occasionally, when id been firing it at some cans, it would just stop firing completely. i would pull the trigger, i would feel something move a LITTLE, then nothing. i couldnt find a fix to this untill i disconnected the battery, waited 10 mins, then reconnected it. another thing, what batteries would fit into this? im trying to get at least a 10.6v.[/QUOTE]
Why do you want to go for a 10.8v? You don't need that. 9.6V is enough. And I doubt you could fit a 10.8v into a crane stock.
well, i just want as high of a voltage as possible without going lipo.the 10.8v ive got ALMOST fits, but just barely does not.
[QUOTE=krazipanda;26963580]well, i just want as high of a voltage as possible without going lipo.the 10.8v ive got ALMOST fits, but just barely does not.[/QUOTE]
Why do you want a bloody higher voltage?
Want to be like "Hey guises my gun shoots over nine thousand BB's a second!!"
Come on, KWA's already shoot fast straight out of the box...
I wouldn't even want a higher RoF. I'm always on semi anyway.
I'm personally alway on Auto, but that's just because I shoot 3 shot burts most of the time.
~doubletap~
[url]http://www.zerooneairsoft.com/product_info.php?products_id=5032[/url]
Is this good enough? I am doing a super l33t Kraut outfit.
~flecktarn~
i like the faster trigger response when im doing semi auto. im not being at all like "LAWL IM BEDDUR DEN JOO CAWS MY FASTER GUN" i dont even full auto most of the time
Is it possible to make an AEG have burst fire? Like semi but shoot 2 or 3 BBs at a time?
[QUOTE=Fenriswolf;26964012]Is it possible to make an AEG have burst fire? Like semi but shoot 2 or 3 BBs at a time?[/QUOTE]
You'd need some new MOSFET system or someshit for that. I think Pro Arms made a 3-round burst FET, not sure how the quality is.
MOSFET wiring will give you burst
[editline]sfd[/editline]
goddamn venom you whore
[url]http://www.trinityairsoft.com/p-984-pro-arms-mosfet-3-round-burst-control-set.aspx[/url]
Expensive just to get a 3 round burst.
It is. I guess because Pro-Arms is one of the few that sell a burst FET, they can set the price to whatever they want.
can i get a responce to what battery i should use with my kwa sr5 besides a lipo?
a 9.6v
or 8.4
9.6v NiMH
[QUOTE=Fish Muffin;26964453]9.6v NiMH[/QUOTE]
This. The same model as the one you currently have.
kk. so a nunchuck intellect 9.6v? thanks
[QUOTE=WolvesSoulZ;26963635]Why do you want a bloody higher voltage?
Want to be like "Hey guises my gun shoots over nine thousand BB's a second!!"
Come on, KWA's already shoot fast straight out of the box...[/QUOTE]
This man speaks the truth. Trust me, I have experience being unloaded on by a stock KWA M4 running a 9.6 at close range.
How's the quality of Socom Gear guns?
[QUOTE=Kydoes;26967153]How's the quality of Socom Gear guns?[/QUOTE]
Dummy, you had your answers there
[url]http://www.facepunch.com/threads/1040599-Quality-of-Socom-Gear[/url]
Can't read?
the IGNORANCE
[editline]25th December 2010[/editline]
it is OVERWHELMING MY FLOW OF FLAVOR
MAKES ME WANT TO rIPP it on
ive got a question, what if im firing on full auto, or semi, and my mag/active rounds in the hi-cap run out and i dry fire 1-2 times?
Pretty sure nothing will happen. Don't dry fire it 150 times and you'll be fine.
your intestines will rupture while your parents both suffer from cardiac arrest
your best friend's penis will enlargen however
Dry firring isn't bad when you don't do it on purpose, and you don't over dry fire.
For example, one of the best tip for your riffle when you store it is to shoot 2-3 times in semi without the mag on to make sure it's empty, and that the spring has near to no tension.
This remind me of the time I had to fix a broken CM Mp5sd5 that had been used to dry-fire a lots. The damned piston was torn apart, the cylinder head unusable, and the air nozzle, well, cracked.
Kid, don't dry fire, it just make us money. (It costed him 115$ with the taxes, as the only parts we had was a modify complete compression set. + The time I spent on it, 1hr.)
At least that damn way he'll learn to not dry fire for fun.
yeah, i was doing that anyway. i was just worried about doing it on full auto
from what i've heard, dry firing your gun isn't any worse then normally shooting it.
thanks. i was just yelled at (lol) by some asshole saying i would break the rental gun if i dry fired it ect ect and that i would need to pay for it if i broke it. this is the guy that had a scabbard for his nerf sword that he brought.
Sorry, you need to Log In to post a reply to this thread.
